CAP 5.0 on Xenix part 2/3: New Files
Chip Salzenberg
chip at ateng.com
Thu Nov 9 11:03:43 AEST 1989
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of shell archive."
# Contents: m4.setup lib/install_libs
# Wrapped by chip at border on Wed Jun 28 13:34:49 1989
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'm4.setup' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'m4.setup'\"
else
echo shar: Extracting \"'m4.setup'\" \(9592 characters\)
sed "s/^X//" >'m4.setup' <<'END_OF_FILE'
Xdefine(`concat',$1$2$3$4$5$6$7$8$9)
Xchangequote([,])
X
X# os - one of:
X# "bsd" - bsd 4.2, bsd 4.3, ultrix 1.1, acis 4.2,4.3 other
X# "standard" bsd systems without nfs
X# "ultrix12" - Ultrix 1.2
X# "ultrix20" - Ultrix 2.0 or greater
X# "hpux" - HP/UX
X# "aux" - A/UX
X# "xenix5" - SCO Xenix System V
X# "pyr" - pyramid (in BSD universe)
X# "sunos" - SunOS
X# Warning: hpux, pyr are hardcoded in some of the makefiles (sorry)
X
X# MAJOR CONFIGURATION
X# set to one of the above (or configure your own below)
Xdefine([os],[xenix5])
X
X# System call configuration (not for system v compatibilty)
X# known: X_GETOPT, X_VPRINTF, X_GETMNT, X_STATFS, X_QUOTA,
X# X_SUNQUOTA, X_FLOCK, X_LOCKF, X_FCNTLLOCKF
X# getopt - "cap: argument processing"
Xdefine([X_GETOPT],1)
X# getmnt - "aufs: info on file systems (dec)"
X# define([X_GETMNT],1)
X# statfs - "aufs: info on file systems (sun nfs)"
X# define([X_STATFS],1)
X# quota - "aufs: info on user quota"
X# define([X_QUOTA],1)
X# getmntent - "aufs: used by sunquota"
X# define([X_SUNQUOTA],1)
X# flock - "afp: file locking"
X# define([X_FLOCK],1)
X# lockf - "afp: byte range locking using unistd.h"
Xdefine([X_LOCKF],1)
X# lockf - "afp: byte range locking using fcntl.h"
X# define([X_FCNTLLOCKF],1)
X# vfprintf - "cap: variable arg fprintf"
Xdefine([X_VPRINTF],1)
X# recvmsg - "cap: lib: scatter gather recv"
Xdefine([X_NORECVMSG],1)
X# sendmsg - "cap: lib: scatter gather send"
Xdefine([X_NOSENDMSG],1)
X# ffs - "cap: lib: ffs - find first set bit"
Xdefine([X_NOFFS],1)
X
X# GETOPT support
Xifdef([X_GETOPT],[],[define([needgetopt],[att_getopt.o])])
X# VPRINTF support
Xifdef([X_VPRINTF],[define([usevprintf], 1)],[])
X
X# Path to cap sources: useful for testing
Xdefine([cwd],[/usr/src/net/cap50])
X# turn on if your system sends packets very quickly (see
X# applications/aufs/INSTALLATION)
X# define([fastether],1) # For papif and samples
X
X# uncomment if your param.h includes types.h and types.h doesn't
X# prevent itself from being included twice
X# define _TYPES
X# define([selfdefinetypes],1)
X# MINOR CONFIGURATION: configure various programs
X
X#define([columbia],1) # so columbia can do things quickly
X#define([debug],1) # testing things (without disrupting)
X
X# location of include files
Xdefine([includedir],[[/usr/local/include]])
X# location of des subroutine source (see lib/afp/README)
Xdefine([desloc],[[../../extras]])
X# location of atalk.local, etc.
Xdefine([etcdest],[[/usr/local/lib/cap]])
Xifdef([columbia],[define([etcdest],[[/usr/local/lib/cap]])])
X# location of user cap programs
Xdefine([capdestdir],[[/usr/local/cap]])
X# location of cap "server" programs
Xdefine([caplibdestdir],[[/usr/local/lib/cap]])
X# location of cap libraries
Xdefine([libdestdir],[[/usr/local/lib]])
X# override for aux (doesn't search /usr/local/lib)
Xifelse(os,[aux],[define([libdestdir],[[/usr/lib]])])
X# cap library names
Xdefine([caplib],[[libcap.a]])
Xdefine([afplib],[[libafp.a]])
Xdefine([afpclib],[[libafpc.a]])
X# names to load cap libraries with
Xdefine([libcap],[[-lcap]])
Xdefine([libafp],[[-lafp]])
Xdefine([libafpc],[[-lafpc]])
X# any special libraries
Xdefine([libspecial],[])
X
X# Aufs: see applications/aufs/INSTALLATION
X
X# WARNING: OS DEPENDENT
X#define([smartunixfinderinfo],1)
X
X# valid here are -DNONXLATE, -DFULL_NCS_SUPPORT
X# or GGTYPE="gid_t"
X# Others: USESTATFS, USEGETMNT, USECHOWN, USEQUOTA, USESUNQUOTA are
X# autoconfigured
Xdefine([aufsosdefs],[])
X
X#lwsrv: see applications/lwsrv/README
X# Valid is: -DADOBE_DSC2_CONFORMANT
Xdefine([simpleflags],[])
X
X#papif: see applications/papif/README
X
X# uncomment and set to right location to turn on printing "plain text files"
X# define([pstextloc],[[\"/usr/local/lib/ps/pstext\"]])
X
X# uncomment and set to right location to turn on page reversal
X# define([psrevloc],[[\"/usr/local/lib/ps/psrev\"]])
X
X# valid are:
X# -DVERBOSELOG - default (set =0 to turn off)
X# -DNO_STRUCT - default is on (structured)
X# -DNOACCT - default is on (accounting)
X# -DIDLESTUFF - default is off
X# -DSFLOWQ - default is 8 (min 1, max 8)
X# -DRFLOWQ - default is 8 (min 1, max 8)
X# -DATPRESPONSETIMEOUT - default is 120 (2 minutes) - in seconds
X# -DWATCHTIME - default is 10 seconds (in seconds)
X# -DDEBUG - default is off
X# -DSTRIPCONTROLD - default is off
X# -DMAPCRTOLF - default is off
X# see papif README file for explanations of the above
X# The following defines are recommended for System V lp model printers
X# (vs. bsd lpd)
X# -DWATCHTIME=0 (no status) -DNOACCT
Xdefine([papflags],[-DWATCHTIME=0 -DNOACCT])
X
X# Set -DBANNERFIRST if you want the banner page to come out as the
X# first page instead of the last page
X# Set -DBANNERLAST if want it last
X# add -DCHARGEBANNER if you want to charge the banner page to the user
X# on system V - there is no accounting, so leave blank
Xdefine([papbanner],[])
X
X# for cap.printers - uncomment and change the following line to point
X# papif, et. al. to a location other than /etc/cap.printers. (Note:
X# line below would set it to $etcdir/cap.printers)
X# define([capprinters],concat([\"],etcdest,[/],[cap.printers],[\"]))
Xifdef([columbia],
X [define([capprinters],concat([\"],etcdest,[/],[cap.printers],[\"]))])
X# for atalkdbm - allows change following line(s) to modify atalk.local
X# (probably shouldn't). Remember that atalk.local is expected to
X# be in etcdest
Xdefine([atalklocal],concat([\"],etcdest,[/],[atalk.local],[\"]))
Xdefine([configdir],concat([\"],etcdest,[\"]))
X
X# in case you want to globally change the c compiler
Xdefine([thecompiler],[cc])
Xdefine([theloader],[ld])
X
X#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
X# END OF CONFIGABLE OPTIONS #
X#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
X
X# You should only edit past here if you are "porting"
X# Automatics
Xdefine([osname],
X ifelse( os,[ultrix12],[Ultrix 1.2],
X os,[ultrix20],[Ultrix 2.0],
X os,[aux],[A/UX],
X os,[sunos],[SunOS],
X os,[hpux],[HP-UX (for 9000 series)],
X os,[bsd],[Standard BSD],
X os,[pyr],[Pyramid in BSD universe],
X [Unknown]))
Xdefine([cflags],ifdef([selfdefinetypes],[-O -D_TYPES],[-O]))
Xdefine([bigcflags],ifelse(os,[hpux],[+Nd2000 +Ns2000]))
Xdefine([cflags],concat(cflags,[ -D],os))
Xifelse(os,[pyr],[
X define([cflags],concat(cflags,[ -q]))])
Xifelse(os,[xenix5],[
X define([cflags],concat(cflags,[ -DLAI_TCP -Di386]))])
Xdefine([cflags],concat(cflags,[ -I$I]))
X# was used for nbp, but found we needed more... leave in case
Xdefine([nbpflags],[])
X
Xdefine([lflags],[])
Xdefine([mflags],[])
X# aux's c compiler isn't nice - it doesn't have a preprocessor
X# definition for aux. So, let's invent one. Also turn on -n
X# for shared code.
Xifelse(os,[aux],[
X define([cflags],concat(cflags,[ -n -Daux]))
X define([lflags],concat(lflags,[ -n]))
X])
X# check to see if we need sysvinstall usage
Xifelse( os,[aux],[define([sysvinstall],[yes])],
X os,[hpux],[define([sysvinstall],[yes])])
X# for cap library
X# Valid are:
X# NOFFS - no ffs function defined, fake it out
X# LOCALTIME_GTOD - uses pd localtime, but gettimeofday always reads
X# disk based time of day. Always defined for AUX for now. Probably
X# needs to be changed for versions of Aux after 1.0
X# NORECVMSG - no recvmsg in system (fake it out)
X# NOSENDMSG - no recvmsg in system (fake it out)
Xdefine([caposdefs],
X concat( ifdef([X_NOFFS],[ -DNOFFS],[]),
X ifelse(os,[aux],[ -DLOCALTIME_GTOD],[]),
X ifdef([X_NORECVMSG], [ -DNORECVMSG],[]),
X ifdef([X_NOSENDMSG], [ -DNOSENDMSG],[])))
X# for afp library
X# two cases for X_LOCKF - if lockf isn't defined
X# first: X_FCNTLLOCKF is defined, so just note that lockf uses fcntl.h
X# second: " " isn't defined so define no lockf
Xdefine([afposdefs],
X concat( ifdef([X_FLOCK],[],[ -DNOFLOCK]),
X ifdef([X_LOCKF],[],
X [ifdef([X_FCNTLLOCKF],[-DLOCKFUSESFCNTL],[-DNOLOCKF])])))
X# for aufs
Xdefine([aufsosdefs],
X concat( aufsosdefs,
X ifdef([X_STATFS],[ -DUSESTATFS],[]),
X ifdef([X_GETMNT],[ -DUSEGETMNT],[]),
X ifdef([X_QUOTA],[ -DUSEQUOTA],[]),
X ifdef([X_SUNQUOTA],[ -DUSESUNQUOTA],[])))
X# if no ranlib (or fakeout like hpux) and need to order libaries
Xifelse(os, [dummy], [define(uselordertsort,1)],
X os, [aux], [define(uselordertsort,1)])
X
X# lw config
Xdefine([lwflags],ifdef([fastether],[-DSFLOWQ=1],[]))
X
X#NBPFLAGS = nbpflags()
X#BIGCFLAGS = bigcflags()
X#CFLAGS = cflags()
X#LFLAGS = lflags()
X#AFPOSDEFS = afposdefs()
X#AUFSOSDEFS = aufsosdefs()
X
Xifdef([debug],[
X# location of include files
X define([includedir],[cwd])
X# location of des subroutine source (see lib/afp/README)
X define([desloc],[[../../extras]])
X# location of atalk.local, etc.
X define([etcdest],concat(cwd,[[[/etc]]]))
X# location of user cap programs
X define([capdestdir],concat(cwd,[[[/bin]]]))
X# location of cap "server" programs
X define([caplibdestdir],concat(cwd,[[[/bin]]]))
X# location of cap libraries
X define([libdestdir],concat(cwd,[[[/lib]]]))
X# cap library names
X define([caplib],[[libcap.a]])
X define([afplib],[[libafp.a]])
X define([afpclib],[[libafpc.a]])
X# names to load cap libraries with
X define([libcap],concat(cwd,[[[/lib/libcap.a]]]))
X define([libafp],concat(cwd,[[[/lib/libafp.a]]]))
X define([libafpc],concat(cwd,[[[/lib/libafpc.a]]]))
X define([capprinters],concat([\"],etcdest,[/],[cap.printers],[\"]))
X define([cflags],concat(cflags,[ -I],includedir))
X define([atalklocal],concat([\"],etcdest,[/],[atalk.local],[\"]))
X define([configdir],concat([\"],etcdest,[\"]))
X])
X
Xdefine([datestring],maketemp(/tmp/capcXXXXXX))
Xsyscmd(date > datestring())
X##########MARKER##########
X# Makefile autoconfigured for a: \
X osname() system on include(datestring())
Xsyscmd(rm datestring())
X
XMFLAGS=mflags()
XLFLAGS=lflags()
XCC=thecompiler()
XLD=theloader()
END_OF_FILE
if test 9592 -ne `wc -c <'m4.setup'`; then
echo shar: \"'m4.setup'\" unpacked with wrong size!
fi
# end of 'm4.setup'
fi
if test -f 'lib/install_libs' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'lib/install_libs'\"
else
echo shar: Extracting \"'lib/install_libs'\" \(158 characters\)
sed "s/^X//" >'lib/install_libs' <<'END_OF_FILE'
X: install_libs
X
Xset -x
Xcopy -m afp/libafp.a /usr/lib/386/Slibafp.a
Xcopy -m afpc/libafpc.a /usr/lib/386/Slibafpc.a
Xcopy -m cap/libcap.a /usr/lib/386/Slibcap.a
END_OF_FILE
if test 158 -ne `wc -c <'lib/install_libs'`; then
echo shar: \"'lib/install_libs'\" unpacked with wrong size!
fi
chmod +x 'lib/install_libs'
# end of 'lib/install_libs'
fi
echo shar: End of shell archive.
exit 0
--
You may redistribute this article only to those who may freely do likewise.
Chip Salzenberg at A T Engineering; <chip at ateng.com> or <uunet!ateng!chip>
More information about the Alt.sources
mailing list