Repost of unzip for BSD (? SYS-V ?) unix.
Michael Enkelis
michaele at vice.ICO.TEK.COM
Wed Jan 31 05:56:59 AEST 1990
#! /bin/sh
# This is a shell archive, meaning:
# 1. Remove everything above the #! /bin/sh line.
# 2. Save the resulting text in a file.
# 3. Execute the file with /bin/sh (not csh) to create the files:
# Makefile
# unzipbsd.c
# crc32.c
# patchlevel.h
# unzip.doc
# This archive created: Thu Jan 25 09:38:11 1990
export PATH; PATH=/bin:$PATH
echo shar: extracting "'Makefile'" '(928 characters)'
if test -f 'Makefile'
then
echo shar: will not over-write existing file "'Makefile'"
else
sed 's/^ X//' << \SHAR_EOF > 'Makefile'
X# Makefile for unzipbsd
X
X
X# "make unzip" -- makes unzip in current directory
X# "make install" -- makes unzip, then moves it into DESTDIR defined below
X# "make clean" -- deletes object files and executable unzip from current dir
X# "make shar" -- make a SHell ARchive
X# "make arc" -- make a DOS archive
X
X# Directory where we want to move executable unzip on "make install"
XDESTDIR=/usr/public
X
X# CFLAGS are flags for the C compiler. LDFLAGS are flags for the loader.
XCFLAGS= -O
X# This is used for DBX
X#CFLAGS= -g
X
XLDFLAGS= -s
X
XCC=cc
X
X.c.o:
X $(CC) -c $(CFLAGS) $*.c
X
XSRCS = unzipbsd.c crc32.c patchlevel.h
XOBJS = unzipbsd.o crc32.o
X
Xunzip: $(OBJS)
X cc $(LDFLAGS) -o unzip $(OBJS)
X
Xunzip.o: unzip.c
X
Xcrc32.o: crc32.c
X
Xinstall: unzip
X mv unzip $(DESTDIR)/unzip
X
Xclean:
X /bin/rm -f $(OBJS) core unzip
X
Xshar:
X @shar -a Makefile $(SRCS) unzip.doc > unzipbsd.shar
X
Xarc:
X @arc -a unzipbsd.arc Makefile $(SRCS) unzip.doc
X
SHAR_EOF
if test 928 -ne "`wc -c < 'Makefile'`"
then
echo shar: error transmitting "'Makefile'" '(should have been 928 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'unzipbsd.c'" '(43256 characters)'
if test -f 'unzipbsd.c'
then
echo shar: will not over-write existing file "'unzipbsd.c'"
else
sed 's/^ X//' << \SHAR_EOF > 'unzipbsd.c'
X
X/*
X * Copyright 1989 Samuel H. Smith; All rights reserved
X *
X * Do not distribute modified versions without my permission.
X * Do not remove or alter this notice or any other copyright notice.
X * If you use this in your own program you must distribute source code.
X * Do not use any of this in a commercial product.
X *
X */
X
X/*
X * Unix mods by Michael Enkelis
X *
X * 01/25/90 -- Fix segment fault when reading corrupted file.
X *
X * 11/20/89 -- Try to use timezone info to correct for local time
X * when extracting files & setting there mod time.
X */
X
X/*
X * UnZip - A simple zipfile extract utility
X *
X * To compile:
X * tcc -B -O -Z -G -mc unzip.c ;turbo C 2.0, compact model
X *
X */
X
X#include "patchlevel.h"
X#define VERSION "2.0"
X
Xtypedef unsigned char byte; /* code assumes UNSIGNED bytes */
Xtypedef long longint;
Xtypedef unsigned word;
Xtypedef char boolean;
X
X#define STRSIZ 256
X
X#include <stdio.h>
X /* this is your standard header for all C compiles */
X#include <ctype.h>
X
X#ifdef MSDOS || M_XENIX
X#include <stdlib.h>
X /* this include defines various standard library prototypes */
X#endif
X
X
X/*
X * SEE HOST OPERATING SYSTEM SPECIFICS SECTION STARTING NEAR LINE 180
X *
X */
X
X
X/* ----------------------------------------------------------- */
X/*
X * Zipfile layout declarations
X *
X */
X
X
Xchar local_file_header_signature[] = {0x50,0x4b,0x03,0x04};
X
X
Xtypedef struct local_file_header {
X word version_needed_to_extract;
X word general_purpose_bit_flag;
X word compression_method;
X word last_mod_file_time;
X word last_mod_file_date;
X longint crc32;
X longint compressed_size;
X longint uncompressed_size;
X word filename_length;
X word extra_field_length;
X} local_file_header;
X
X
Xchar central_file_header_signature[] = {0x50,0x4b,0x01,0x02};
X
X
Xtypedef struct central_directory_file_header {
X word version_made_by;
X word version_needed_to_extract;
X word general_purpose_bit_flag;
X word compression_method;
X word last_mod_file_time;
X word last_mod_file_date;
X longint crc32;
X longint compressed_size;
X longint uncompressed_size;
X word filename_length;
X word extra_field_length;
X word file_comment_length;
X word disk_number_start;
X word internal_file_attributes;
X longint external_file_attributes;
X longint relative_offset_local_header;
X} central_directory_file_header;
X
X
Xchar end_central_dir_signature[] = {0x50,0x4b,0x05,0x06};
X
X
Xtypedef struct end_central_dir_record {
X word number_this_disk;
X word number_disk_with_start_central_directory;
X word total_entries_central_dir_on_this_disk;
X word total_entries_central_dir;
X longint size_central_directory;
X longint offset_start_central_directory;
X word zipfile_comment_length;
X} end_central_dir_record;
X
X
X
X/* ----------------------------------------------------------- */
X/*
X * input file variables
X *
X */
X
X#define INBUFSIZ 0x2000
Xbyte *inbuf; /* input file buffer - any size is legal */
Xbyte *inptr;
Xbyte *comment;
X
Xint incnt;
Xunsigned bitbuf;
Xint bits_left;
Xboolean zipeof;
X
Xint zipfd;
Xchar zipfn[STRSIZ];
Xlocal_file_header lrec;
X
X
X/* ----------------------------------------------------------- */
X/*
X * output stream variables
X *
X */
X
X#define OUTBUFSIZ 0x6000
Xbyte *outbuf; /* buffer for rle look-back */
Xbyte *outptr;
X
Xlongint outpos; /* absolute position in outfile */
Xint outcnt; /* current position in outbuf */
X
Xint outfd;
Xchar filename[STRSIZ];
Xchar extra[STRSIZ];
X
X#define DLE 144
X
X
X/* ----------------------------------------------------------- */
X/*
X * shrink/reduce working storage
X *
X */
X
Xint factor;
Xbyte followers[256][64];
Xbyte Slen[256];
X
X#define max_bits 13
X#define init_bits 9
X#define hsize 8192
X#define first_ent 257
X#define clear 256
X
Xtypedef int hsize_array_integer[hsize+1];
Xtypedef byte hsize_array_byte[hsize+1];
X
Xhsize_array_integer prefix_of;
Xhsize_array_byte suffix_of;
Xhsize_array_byte stack;
X
Xint codesize;
Xint maxcode;
Xint free_ent;
Xint maxcodemax;
Xint offset;
Xint sizex;
X
X
X
X/* ============================================================= */
X/*
X * Host operating system details
X *
X */
X
X#include <strings.h>
X /* this include defines strcpy, strchr, etc. */
X
X#include <sys/time.h>
X#include <sys/types.h>
X#include <sys/timeb.h>
X /*
X * this include file defines
X * struct ftime ... (* file time/date stamp info *)
X */
X
X#ifdef MSDOS || M_XENIX
X#include <io.h>
X /*
X * this include file defines
X * struct ftime ... (* file time/date stamp info *)
X * int setftime (int handle, struct ftime *ftimep);
X * #define SEEK_CUR 1 (* lseek() modes *)
X * #define SEEK_END 2
X * #define SEEK_SET 0
X */
X#else
X#include <sys/file.h>
X /*
X * this include file defines
X * #define L_SET 0 (* Seek to absolute record *)
X */
X#define SEEK_SET L_SET
X#endif
X
X
X
X#ifdef MSDOS || M_XENIX
X#include <fcntl.h>
X /*
X * this include file defines
X * #define O_BINARY 0x8000 (* no cr-lf translation *)
X * as used in the open() standard function
X */
X#ifndef L_SET
X#define L_SET 1
X#endif
X#endif
X
X#ifndef O_BINARY
X#define O_BINARY 0 /* BSD don't have a Open_BINARY mode */
X#endif
X
X#include <sys/types.h>
X#include <sys/stat.h>
X /*
X * this include file defines
X * #define S_IREAD 0x0100 (* owner may read *)
X * #define S_IWRITE 0x0080 (* owner may write *)
X * as used in the creat() standard function
X */
X
Xvoid set_file_time()
X /*
X * set the output file date/time stamp according to information from the
X * zipfile directory record for this file
X */
X{
X /*
X * set output file date and time - this is optional and can be
X * deleted
X */
X
X#define leap(y) (((y) % 4 == 0 && (y) % 100 != 0) || (y) % 400 == 0)
X#define nleap(y) (((y) - 1969) / 4 - ((y) - 1901) / 100 + ((y) - 1601) / 400)
X
X byte yr, mo, dy; /* parts of a date */
X byte hh, mm, ss; /* parts of a time */
X static char month_lengths[] =
X { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
X int day_of_year, year;
X struct utimbuf {
X time_t actime; /* file accessed time */
X time_t modtime; /* file updated time */
X } times;
X#ifndef HAVE_TZ
X struct timeb info; /* local timezone info */
X#endif
X
X yr = (lrec.last_mod_file_date >> 9) & 0x7f; /* dissect the date */
X mo = (lrec.last_mod_file_date >> 5) & 0x0f;
X dy = lrec.last_mod_file_date & 0x1f;
X
X hh = (lrec.last_mod_file_time >> 11) & 0x1f; /* dissect the time */
X mm = (lrec.last_mod_file_time >> 5) & 0x3f;
X ss = (lrec.last_mod_file_time & 0x1f) * 2;
X
X yr = (yr + 80) % 100;
X year = yr + 1900;
X
X /*
X * this is the standard Unix implementation (also fully
X * compatible with MSC)
X */
X
X close(outfd);
X if (mo < 1 || mo > 12 || dy < 1 || dy > month_lengths[mo-1]
X && !(mo == 2 && dy == 29 && leap (year))
X || hh > 23 || mm > 59 || ss > 59)
X return;
X
X day_of_year = dy - 1;
X if (mo > 2 && leap(year))
X ++day_of_year;
X
X while (--mo > 0)
X day_of_year += month_lengths[mo - 1];
X
X times.modtime = (86400 * (long)(day_of_year + 365 * (year - 1970)
X + nleap (year)) + 3600 * (hh-1) + 60 * mm + ss);
X
X/* SYS-V compat code */
X#ifdef HAVE_TZ
X tzset();
X times.modtime += timezone;
X#else
X (void)ftime(&info); /* Find timezone */
X times.modtime += (info.timezone*60); /* Correct to local time */
X#endif
X times.actime = times.modtime;
X utime(filename, ×);
X}
X
X/*
X * Some defines to use the GETOPT functions
X * that are on most systems, even TURBO-C has these.
X */
X#define USE_GETOPT /* Use the GETOPT package */
Xint extract = 1; /* Extract contents */
Xint debugging = 0; /* debug enable */
Xint verbose = 0; /* be verbose */
Xint list_zip = 0; /* list contents only */
Xint test_zip = 0; /* test CRC's only */
Xint unixfy = 1; /* Convert filename to lowercase */
Xint dsp_comment = 1; /* Display comments */
X
Xlong crc32val; /* The CRC value we calculate */
Xint numbad =0;
Xint Total_files =0;
Xlong Total_bytes =0;
Xlong Total_length =0;
X
X/* ============================================================= */
X
Xint create_output_file()
X /* return non-0 if creat failed */
X{
X if (!extract)
X return 0;
X
X /* create the output file with READ and WRITE permissions */
X outfd = creat(filename, S_IWRITE | S_IREAD);
X if (outfd < 1) {
X printf("Can't create output: %s\n", filename);
X return 1;
X }
X
X /*
X * close the newly created file and reopen it in BINARY mode to
X * disable all CR/LF translations
X */
X close(outfd);
X outfd = open(filename, O_RDWR | O_BINARY);
X
X /* write a single byte at EOF to pre-allocate the file */
X lseek(outfd, lrec.uncompressed_size - 1L, SEEK_SET);
X write(outfd, "?", 1);
X lseek(outfd, 0L, SEEK_SET);
X return 0;
X}
X
X
Xint open_input_file()
X /* return non-0 if creat failed */
X{
X /*
X * open the zipfile for reading and in BINARY mode to prevent cr/lf
X * translation, which would corrupt the bitstreams
X */
X
X zipfd = open(zipfn, O_RDONLY | O_BINARY);
X if (zipfd < 1) {
X printf("Can't open input file: %s\n", zipfn);
X return (1);
X }
X return 0;
X}
X
X
Xint FillBuffer()
X /* fill input buffer if possible */
X{
X int readsize;
X
X if (lrec.compressed_size <= 0)
X return incnt = 0;
X
X if (lrec.compressed_size > INBUFSIZ)
X readsize = INBUFSIZ;
X else
X readsize = (int) lrec.compressed_size;
X incnt = read(zipfd, inbuf, readsize);
X
X if (incnt <= 0) /* Corrupted file test */
X return incnt = 0;
X
X lrec.compressed_size -= incnt;
X inptr = inbuf;
X return incnt--;
X}
X
Xint ReadByte(x)
Xunsigned *x;
X /* read a byte; return 8 if byte available, 0 if not */
X{
X if (incnt-- == 0)
X if (FillBuffer() == 0)
X return 0;
X
X *x = *inptr++;
X return 8;
X}
X
X
X/* ------------------------------------------------------------- */
Xstatic unsigned mask_bits[] =
X {0, 0x0001, 0x0003, 0x0007, 0x000f,
X 0x001f, 0x003f, 0x007f, 0x00ff,
X 0x01ff, 0x03ff, 0x07ff, 0x0fff,
X 0x1fff, 0x3fff, 0x7fff, 0xffff
X };
X
X
Xint FillBitBuffer(bits)
Xregister int bits;
X{
X /* get the bits that are left and read the next word */
X unsigned temp;
X register int result = bitbuf;
X int sbits = bits_left;
X bits -= bits_left;
X
X /* read next word of input */
X bits_left = ReadByte(&bitbuf);
X bits_left += ReadByte(&temp);
X bitbuf |= (temp << 8);
X if (bits_left == 0)
X zipeof = 1;
X
X /* get the remaining bits */
X result = result | (int) ((bitbuf & mask_bits[bits]) << sbits);
X bitbuf >>= bits;
X bits_left -= bits;
X return result;
X}
X
X#define READBIT(nbits,zdest,ztype) \
X { if (nbits <= bits_left) \
X { zdest = ztype(bitbuf & mask_bits[nbits]);\
X bitbuf >>= nbits; bits_left -= nbits; }\
X else zdest = ztype(FillBitBuffer(nbits));}
X
X/*
X * macro READBIT(nbits,zdest,ztype)
X * {
X * if (nbits <= bits_left) {
X * zdest = ztype(bitbuf & mask_bits[nbits]);
X * bitbuf >>= nbits;
X * bits_left -= nbits;
X * } else
X * zdest = ztype(FillBitBuffer(nbits));
X * }
X *
X */
X
X
X/* ------------------------------------------------------------- */
X
Xvoid Write_file()
X{
X if (extract)
X write(outfd, outbuf, outcnt);
X}
X
X/* ------------------------------------------------------------- */
X
Xvoid FlushOutput()
X /* flush contents of output buffer */
X{
X UpdateCRC(outbuf, outcnt);
X Write_file();
X outpos += outcnt;
X outcnt = 0;
X outptr = outbuf;
X}
X
X#define OUTB(intc) { *outptr++=intc; if (++outcnt==OUTBUFSIZ) FlushOutput(); }
X
X/*
X * macro OUTB(intc)
X * {
X * *outptr++=intc;
X * if (++outcnt==OUTBUFSIZ)
X * FlushOutput();
X * }
X *
X */
X
X
X/* ----------------------------------------------------------- */
X
Xvoid LoadFollowers()
X{
X register int x;
X register int i;
X
X for (x = 255; x >= 0; x--) {
X READBIT(6,Slen[x],(byte));
X for (i = 0; i < Slen[x]; i++) {
X READBIT(8,followers[x][i],(byte));
X }
X }
X}
X
X/* ----------------------------------------------------------- */
X/*
X * The Reducing algorithm is actually a combination of two
X * distinct algorithms. The first algorithm compresses repeated
X * byte sequences, and the second algorithm takes the compressed
X * stream from the first algorithm and applies a probabilistic
X * compression method.
X */
X
Xint L_table[] = {0, 0x7f, 0x3f, 0x1f, 0x0f};
X
Xint D_shift[] = {0, 0x07, 0x06, 0x05, 0x04};
Xint D_mask[] = {0, 0x01, 0x03, 0x07, 0x0f};
X
Xint B_table[] = {8, 1, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5,
X 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 6, 6,
X 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
X 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
X 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
X 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
X 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
X 7, 7, 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
X 8, 8, 8, 8};
X
X/* ----------------------------------------------------------- */
X
Xvoid unReduce()
X /* expand probablisticly reduced data */
X{
X register int lchar;
X int nchar;
X int ExState;
X int V;
X int Len;
X
X factor = lrec.compression_method - 1;
X ExState = 0;
X lchar = 0;
X LoadFollowers();
X
X while (((outpos + outcnt) < lrec.uncompressed_size) && (!zipeof)) {
X if (Slen[lchar] == 0)
X READBIT(8,nchar,(int)) /* ; */
X else
X {
X READBIT(1,nchar,(int));
X if (nchar != 0)
X READBIT(8,nchar,(int)) /* ; */
X else
X {
X int follower;
X int bitsneeded = B_table[Slen[lchar]];
X READBIT(bitsneeded,follower,(int));
X nchar = followers[lchar][follower];
X }
X }
X
X /* expand the resulting byte */
X switch (ExState) {
X
X case 0:
X if (nchar != DLE)
X OUTB(nchar) /*;*/
X else
X ExState = 1;
X break;
X
X case 1:
X if (nchar != 0) {
X V = nchar;
X Len = V & L_table[factor];
X if (Len == L_table[factor])
X ExState = 2;
X else
X ExState = 3;
X }
X else {
X OUTB(DLE);
X ExState = 0;
X }
X break;
X
X case 2: {
X Len += nchar;
X ExState = 3;
X }
X break;
X
X case 3: {
X register int i = Len + 3;
X int offset = (((V >> D_shift[factor]) &
X D_mask[factor]) << 8) + nchar + 1;
X longint op = outpos + outcnt - offset;
X
X /* special case- before start of file */
X while ((op < 0L) && (i > 0)) {
X OUTB(0);
X op++;
X i--;
X }
X
X /* normal copy of data from output buffer */
X {
X register int ix = (int) (op % OUTBUFSIZ);
X
X /* do a block memory copy if possible */
X if ( ((ix +i) < OUTBUFSIZ) &&
X ((outcnt+i) < OUTBUFSIZ) ) {
X MEMCPY(outptr,&outbuf[ix],i);
X outptr += i;
X outcnt += i;
X }
X
X /* otherwise copy byte by byte */
X else while (i--) {
X OUTB(outbuf[ix]);
X if (++ix >= OUTBUFSIZ)
X ix = 0;
X }
X }
X
X ExState = 0;
X }
X break;
X }
X
X /* store character for next iteration */
X lchar = nchar;
X }
X}
X
X
X/* ------------------------------------------------------------- */
X/*
X * Shrinking is a Dynamic Ziv-Lempel-Welch compression algorithm
X * with partial clearing.
X *
X */
X
Xvoid partial_clear()
X{
X register int pr;
X register int cd;
X
X /* mark all nodes as potentially unused */
X for (cd = first_ent; cd < free_ent; cd++)
X prefix_of[cd] |= 0x8000;
X
X /* unmark those that are used by other nodes */
X for (cd = first_ent; cd < free_ent; cd++) {
X pr = prefix_of[cd] & 0x7fff; /* reference to another node? */
X if (pr >= first_ent) /* flag node as referenced */
X prefix_of[pr] &= 0x7fff;
X }
X
X /* clear the ones that are still marked */
X for (cd = first_ent; cd < free_ent; cd++)
X if ((prefix_of[cd] & 0x8000) != 0)
X prefix_of[cd] = -1;
X
X /* find first cleared node as next free_ent */
X cd = first_ent;
X while ((cd < maxcodemax) && (prefix_of[cd] != -1))
X cd++;
X free_ent = cd;
X}
X
X
X/* ------------------------------------------------------------- */
X
Xvoid unShrink()
X{
X#define GetCode(dest) READBIT(codesize,dest,(int))
X
X register int code;
X register int stackp;
X int finchar;
X int oldcode;
X int incode;
X
X
X /* decompress the file */
X maxcodemax = 1 << max_bits;
X codesize = init_bits;
X maxcode = (1 << codesize) - 1;
X free_ent = first_ent;
X offset = 0;
X sizex = 0;
X
X for (code = maxcodemax; code > 255; code--)
X prefix_of[code] = -1;
X
X for (code = 255; code >= 0; code--) {
X prefix_of[code] = 0;
X suffix_of[code] = code;
X }
X
X GetCode(oldcode);
X if (zipeof)
X return;
X finchar = oldcode;
X
X OUTB(finchar);
X
X stackp = hsize;
X
X while (!zipeof) {
X GetCode(code);
X if (zipeof)
X return;
X
X while (code == clear) {
X GetCode(code);
X switch (code) {
X
X case 1:{
X codesize++;
X if (codesize == max_bits)
X maxcode = maxcodemax;
X else
X maxcode = (1 << codesize) - 1;
X }
X break;
X
X case 2:
X partial_clear();
X break;
X }
X
X GetCode(code);
X if (zipeof)
X return;
X }
X
X
X /* special case for KwKwK string */
X incode = code;
X if (prefix_of[code] == -1) {
X stack[--stackp] = finchar;
X code = oldcode;
X }
X
X
X /* generate output characters in reverse order */
X while (code >= first_ent) {
X stack[--stackp] = suffix_of[code];
X code = prefix_of[code];
X }
X
X finchar = suffix_of[code];
X stack[--stackp] = finchar;
X
X
X /* and put them out in forward order, block copy */
X if ((hsize-stackp+outcnt) < OUTBUFSIZ) {
X MEMCPY(outptr,&stack[stackp],hsize-stackp);
X outptr += hsize-stackp;
X outcnt += hsize-stackp;
X stackp = hsize;
X }
X
X /* output byte by byte if we can't go by blocks */
X else while (stackp < hsize)
X OUTB(stack[stackp++]);
X
X
X /* generate new entry */
X code = free_ent;
X if (code < maxcodemax) {
X prefix_of[code] = oldcode;
X suffix_of[code] = finchar;
X
X do
X code++;
X while ((code < maxcodemax) && (prefix_of[code] != -1));
X
X free_ent = code;
X }
X
X /* remember previous code */
X oldcode = incode;
X }
X
X}
X
X/* ------------------------------------------------------------- */
X/*
X * Imploding
X * ---------
X *
X * The Imploding algorithm is actually a combination of two distinct
X * algorithms. The first algorithm compresses repeated byte sequences
X * using a sliding dictionary. The second algorithm is used to compress
X * the encoding of the sliding dictionary ouput, using multiple
X * Shannon-Fano trees.
X *
X */
X
X#define maxSF 256
X
X typedef struct sf_entry {
X word Code;
X byte Value;
X byte BitLength;
X } sf_entry;
X
X typedef struct sf_tree { /* a shannon-fano tree */
X sf_entry entry[maxSF];
X int entries;
X int MaxLength;
X } sf_tree;
X
X typedef sf_tree *sf_treep;
X
X sf_tree lit_tree;
X sf_tree length_tree;
X sf_tree distance_tree;
X boolean lit_tree_present;
X boolean eightK_dictionary;
X int minimum_match_length;
X int dict_bits;
X
X
Xvoid SortLengths(tree)
Xsf_tree *tree;
X /* Sort the Bit Lengths in ascending order, while retaining the order
X of the original lengths stored in the file */
X{
X int x;
X int gap;
X sf_entry t;
X boolean noswaps;
X int a, b;
X
X gap = tree->entries / 2;
X
X do {
X do {
X noswaps = 1;
X for (x = 0; x <= (tree->entries - 1) - gap; x++)
X {
X a = tree->entry[x].BitLength;
X b = tree->entry[x + gap].BitLength;
X if ((a > b) || ((a == b) && (tree->entry[x].Value > tree->entry[x + gap].Value)))
X {
X t = tree->entry[x];
X tree->entry[x] = tree->entry[x + gap];
X tree->entry[x + gap] = t;
X noswaps = 0;
X }
X }
X } while (!noswaps);
X
X gap = gap / 2;
X } while (gap > 0);
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid ReadLengths(tree)
Xsf_tree *tree;
X{
X int treeBytes;
X int i;
X int num, len;
X
X /* get number of bytes in compressed tree */
X READBIT(8,treeBytes,(int));
X treeBytes++;
X i = 0;
X
X tree->MaxLength = 0;
X
X /* High 4 bits: Number of values at this bit length + 1. (1 - 16)
X Low 4 bits: Bit Length needed to represent value + 1. (1 - 16) */
X while (treeBytes > 0)
X {
X READBIT(4,len,(int)); len++;
X READBIT(4,num,(int)); num++;
X
X while (num > 0)
X {
X if (len > tree->MaxLength)
X tree->MaxLength = len;
X tree->entry[i].BitLength = (byte) len;
X tree->entry[i].Value = (byte) i;
X i++;
X num--;
X }
X
X treeBytes--;
X }
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid GenerateTrees(tree)
Xsf_tree *tree;
X /* Generate the Shannon-Fano trees */
X{
X word Code;
X int CodeIncrement;
X int LastBitLength;
X int i;
X
X
X Code = 0;
X CodeIncrement = 0;
X LastBitLength = 0;
X
X i = tree->entries - 1; /* either 255 or 63 */
X while (i >= 0)
X {
X Code += CodeIncrement;
X if (tree->entry[i].BitLength != (byte) LastBitLength)
X {
X LastBitLength = tree->entry[i].BitLength;
X CodeIncrement = 1 << (16 - LastBitLength);
X }
X
X tree->entry[i].Code = Code;
X i--;
X }
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid ReverseBits(tree)
Xsf_tree *tree;
X /* Reverse the order of all the bits in the above ShannonCode[]
X vector, so that the most significant bit becomes the least
X significant bit. For example, the value 0x1234 (hex) would become
X 0x2C48 (hex). */
X{
X int i;
X word mask;
X word revb;
X word v;
X word o;
X int b;
X
X
X for (i = 0; i <= tree->entries - 1; i++)
X {
X /* get original code */
X o = tree->entry[i].Code;
X
X /* reverse each bit */
X mask = 0x0001;
X revb = 0x8000;
X v = 0;
X for (b = 0; b <= 15; b++)
X {
X /* if bit set in mask, then substitute reversed bit */
X if ((o & mask) != 0)
X v = v | revb;
X
X /* advance to next bit */
X revb = (revb >> 1);
X mask = (mask << 1);
X }
X
X /* store reversed bits */
X tree->entry[i].Code = v;
X }
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid LoadTree(tree, treesize)
Xsf_tree *tree;
Xint treesize;
X /* allocate and load a shannon-fano tree from the compressed file */
X{
X tree->entries = treesize;
X ReadLengths(tree);
X SortLengths(tree);
X GenerateTrees(tree);
X ReverseBits(tree);
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid LoadTrees()
X{
X /* bit 1... */
X eightK_dictionary = (boolean) ((lrec.general_purpose_bit_flag & 0x02) != 0);
X /* bit 2... */
X lit_tree_present = (boolean) ((lrec.general_purpose_bit_flag & 0x04) != 0);
X
X if (eightK_dictionary)
X dict_bits = 7;
X else
X dict_bits = 6;
X
X if (lit_tree_present)
X {
X minimum_match_length = 3;
X LoadTree(&lit_tree,256);
X }
X else
X minimum_match_length = 2;
X
X LoadTree(&length_tree,64);
X LoadTree(&distance_tree,64);
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid ReadTree(tree, dest)
Xsf_tree *tree;
Xint *dest;
X /* read next byte using a shannon-fano tree */
X{
X int bits = 0;
X word cv = 0;
X int cur = 0;
X int b;
X
X *dest = -1; /* in case of error */
X
X for (;;)
X {
X READBIT(1,b,(int));
X cv = cv | (b << bits);
X bits++;
X
X /* this is a very poor way of decoding shannon-fano. two quicker
X methods come to mind:
X a) arrange the tree as a huffman-style binary tree with
X a "leaf" indicator at each node,
X and
X b) take advantage of the fact that s-f codes are at most 8
X bits long and alias unused codes for all bits following
X the "leaf" bit.
X */
X
X while (tree->entry[cur].BitLength < (byte) bits)
X {
X cur++;
X if (cur >= tree->entries)
X return; /* data error */
X }
X
X while (tree->entry[cur].BitLength == (byte) bits)
X {
X if (tree->entry[cur].Code == cv)
X {
X *dest = tree->entry[cur].Value;
X return;
X }
X
X cur++;
X if (cur >= tree->entries)
X return; /* data error */
X }
X }
X}
X
X
X/* ----------------------------------------------------------- */
X
Xvoid unImplode()
X /* expand imploded data */
X
X{
X int lout;
X longint op;
X int Length;
X int Distance;
X
X LoadTrees();
X
X while ((!zipeof) && ((outpos+outcnt) < lrec.uncompressed_size))
X {
X READBIT(1,lout,(int));
X
X if (lout != 0) /* encoded data is literal data */
X {
X if (lit_tree_present) /* use Literal Shannon-Fano tree */
X ReadTree(&lit_tree,&lout);
X else
X READBIT(8,lout,(int));
X
X OUTB((byte) lout);
X }
X else /* encoded data is sliding dictionary match */
X {
X READBIT(dict_bits,lout,(int));
X Distance = lout;
X
X ReadTree(&distance_tree,&lout);
X Distance |= (lout << dict_bits);
X /* using the Distance Shannon-Fano tree, read and decode the
X upper 6 bits of the Distance value */
X
X ReadTree(&length_tree,&Length);
X /* using the Length Shannon-Fano tree, read and decode the
X Length value */
X
X Length += minimum_match_length;
X if (Length == (63 + minimum_match_length))
X {
X READBIT(8,lout,(int));
X Length += lout;
X }
X
X /* move backwards Distance+1 bytes in the output stream, and copy
X Length characters from this position to the output stream.
X (if this position is before the start of the output stream,
X then assume that all the data before the start of the output
X stream is filled with zeros) */
X
X op = (outpos+outcnt) - Distance - 1L;
X
X /* special case- before start of file */
X while ((op < 0L) && (Length > 0)) {
X OUTB(0);
X op++;
X Length--;
X }
X
X /* normal copy of data from output buffer */
X {
X register int ix = (int) (op % OUTBUFSIZ);
X
X /* do a block memory copy if possible */
X if ( ((ix +Length) < OUTBUFSIZ) &&
X ((outcnt+Length) < OUTBUFSIZ) ) {
X MEMCPY(outptr,&outbuf[ix],Length);
X outptr += Length;
X outcnt += Length;
X }
X
X /* otherwise copy byte by byte */
X else while (Length--) {
X OUTB(outbuf[ix]);
X if (++ix >= OUTBUFSIZ)
X ix = 0;
X }
X }
X }
X }
X}
X
X/* ---------------------------------------------------------- */
X
Xvoid extract_member()
X{
X unsigned b;
X
X bits_left = 0;
X bitbuf = 0;
X incnt = 0;
X outpos = 0L;
X outcnt = 0;
X outptr = outbuf;
X zipeof = 0;
X crc32val = 0xFFFFFFFFL;
X
X
X /* create the output file with READ and WRITE permissions */
X if (create_output_file())
X exit(1);
X
X switch (lrec.compression_method) {
X
X case 0: /* stored */
X {
X if (test_zip)
X printf("Testing: %-12s ", filename);
X if (extract)
X printf(" Extracting: %-12s ", filename);
X while (ReadByte(&b))
X OUTB(b);
X }
X break;
X
X case 1: { /* shrunk */
X if (test_zip)
X printf("Testing: %-12s ", filename);
X if (extract)
X printf("UnShrinking: %-12s ", filename);
X unShrink();
X }
X break;
X
X case 2: /* reduced, factor:1 */
X case 3: /* reduced, factor:2 */
X case 4: /* reduced, factor:3 */
X case 5: { /* reduced, factor:4 */
X if (test_zip)
X printf("Testing: %-12s ", filename);
X if (extract)
X printf(" Expanding: %-12s ", filename);
X unReduce();
X }
X break;
X
X case 6: { /* imploded */
X if (test_zip)
X printf("Testing: %-12s ", filename);
X if (extract)
X printf(" Exploding: %-12s ", filename);
X unImplode();
X }
X break;
X
X
X default:
X printf("Unknown compression method.");
X }
X
X
X /* write the last partial buffer, if any */
X if (outcnt > 0) {
X UpdateCRC(outbuf, outcnt);
X Write_file();
X }
X
X /* set output file date and time */
X set_file_time();
X
X close(outfd);
X
X crc32val = -1 - crc32val;
X if (!list_zip) {
X if (crc32val != lrec.crc32) {
X numbad++;
X printf(" Bad");
X if(verbose)
X printf(", CRC %08lx (should be %08lx)", lrec.crc32, crc32val);
X } else {
X printf(" Ok");
X if (verbose)
X printf(", CRC = %08lx", lrec.crc32);
X }
X printf("\n");
X }
X}
X
X
X/* ---------------------------------------------------------- */
X
Xvoid get_string(len, s)
Xint len;
Xchar *s;
X{
X read(zipfd, s, len);
X s[len] = 0;
X}
X
X/* UNIX support routines: Michael Enkelis */
Xget_byte()
X{
X byte nibble;
X read(zipfd,&nibble,1);
X return (byte) (nibble & 0xff);
X}
X
Xget_word()
X{
X byte nibble[2];
X nibble[0] = get_byte();
X nibble[1] = get_byte();
X return (word) (nibble[0] | nibble[1] << 8);
X}
X
Xget_long()
X{
X byte nibble[4];
X nibble[0] = get_byte();
X nibble[1] = get_byte();
X nibble[2] = get_byte();
X nibble[3] = get_byte();
X return (longint) ((unsigned long) nibble[0] |
X ((unsigned long) nibble[1] << 8) |
X ((unsigned long) nibble[2] << 16) |
X ((unsigned long) nibble[3] << 24));
X}
X
XMEMCPY(s1, s2, n) /* Use our simple version of memcpy */
Xregister byte *s1, *s2;
Xregister n;
X{
X while (--n >= 0)
X *s1++ = *s2++;
X}
X
XSTRCHR(sp, c) /* Use our simple version of strchr */
Xregister char *sp, c;
X{
X do {
X if (*sp == c)
X return(sp);
X } while (*sp++);
X return(NULL);
X}
X
X/** End of added support routines **/
X
X
X/* ---------------------------------------------------------- */
X
Xvoid process_local_file_header()
X{
X byte Temp;
X byte yr, mo, dy; /* parts of a date */
X byte hh, mm, ss; /* parts of a time */
X
X static char *mon[] = /* month abbreviations */
X {
X "Jan", "Feb", "Mar", "Apr",
X "May", "Jun", "Jul", "Aug",
X "Sep", "Oct", "Nov", "Dec"
X };
X
X lrec.version_needed_to_extract = get_word();
X lrec.general_purpose_bit_flag = get_word();
X lrec.compression_method = get_word();
X lrec.last_mod_file_time = get_word();
X lrec.last_mod_file_date = get_word();
X lrec.crc32 = get_long();
X lrec.compressed_size = get_long();
X lrec.uncompressed_size = get_long();
X lrec.filename_length = get_word();
X lrec.extra_field_length = get_word();
X
X get_string(lrec.filename_length,filename);
X if (unixfy) {
X char *cp;
X for (cp = filename; *cp; ++cp)
X if (isupper(*cp)) *cp = tolower(*cp);
X }
X
X get_string(lrec.extra_field_length,extra);
X
X yr = (lrec.last_mod_file_date >> 9) & 0x7f; /* dissect the date */
X mo = (lrec.last_mod_file_date >> 5) & 0x0f;
X dy = lrec.last_mod_file_date & 0x1f;
X
X hh = (lrec.last_mod_file_time >> 11) & 0x1f; /* dissect the time */
X mm = (lrec.last_mod_file_time >> 5) & 0x3f;
X ss = (lrec.last_mod_file_time & 0x1f) * 2;
X
X if (debugging) {
X printf("\n\nProcess LOCAL file header.\n");
X Temp = lrec.version_needed_to_extract;
X printf("Version used : %d\n",Temp);
X printf("Bit flags : ");
X Temp = (lrec.general_purpose_bit_flag & 3);
X if (Temp & 1)
X printf("Encrypted\n");
X if (lrec.compression_method == 6) {
X printf("%dK sliding dictionary, ", (Temp & 2)? 8 : 4);
X printf("%d Shannon-Fano trees", (Temp & 4)? 3 : 2);
X }
X printf("\n");
X
X printf("Compression : %d\n",lrec.compression_method);
X printf("Mod time :");
X printf("%2d:%02d%cm\n",
X (hh > 12 ? hh - 12 : hh), mm, (hh > 11 ? 'p' : 'a'));
X printf("Mod date :");
X printf("%2d %3s %02d\n", dy, mon[mo - 1], (yr + 80) % 100);
X printf("Crc32 : %d\n",~lrec.crc32);
X printf("Compressed size : %d\n",lrec.compressed_size);
X printf("Normal file size: %d\n",lrec.uncompressed_size);
X printf("File name : %s.%s\n",filename,extra);
X }
X
X extract_member();
X}
X
X
X/* ---------------------------------------------------------- */
X
Xvoid process_central_file_header()
X{
X central_directory_file_header rec;
X char filename[STRSIZ];
X char extra[STRSIZ];
X
X byte Temp;
X byte yr, mo, dy; /* parts of a date */
X byte hh, mm, ss; /* parts of a time */
X
X static char *mon[] = /* month abbreviations */
X {
X "Jan", "Feb", "Mar", "Apr",
X "May", "Jun", "Jul", "Aug",
X "Sep", "Oct", "Nov", "Dec"
X };
X
X rec.version_made_by = get_word();
X rec.version_needed_to_extract = get_word();
X rec.general_purpose_bit_flag = get_word();
X rec.compression_method = get_word();
X rec.last_mod_file_time = get_word();
X rec.last_mod_file_date = get_word();
X rec.crc32 = get_long();
X rec.compressed_size = get_long();
X rec.uncompressed_size = get_long();
X rec.filename_length = get_word();
X rec.extra_field_length = get_word();
X rec.file_comment_length = get_word();
X rec.disk_number_start = get_word();
X rec.internal_file_attributes = get_word();
X rec.external_file_attributes = get_long();
X rec.relative_offset_local_header = get_long();
X
X get_string(rec.filename_length,filename);
X if (unixfy) {
X char *cp;
X for (cp = filename; *cp; ++cp)
X if (isupper(*cp)) *cp = tolower(*cp);
X }
X
X get_string(rec.extra_field_length,extra);
X comment = (byte *) (realloc(comment, rec.file_comment_length));
X get_string(rec.file_comment_length,comment);
X
X yr = (rec.last_mod_file_date >> 9) & 0x7f; /* dissect the date */
X mo = (rec.last_mod_file_date >> 5) & 0x0f;
X dy = rec.last_mod_file_date & 0x1f;
X
X hh = (rec.last_mod_file_time >> 11) & 0x1f; /* dissect the time */
X mm = (rec.last_mod_file_time >> 5) & 0x3f;
X ss = (rec.last_mod_file_time & 0x1f) * 2;
X
X if (debugging) {
X printf("\n\nProcess CENTRAL file header.\n");
X printf("Version made by : ");
X Temp = rec.version_made_by;
X switch ((Temp >> 8) & 7) {
X case 0: printf("MS-DOS");break;
X case 1: printf("Amiga");break;
X case 2: printf("VMS");break;
X case 3: printf("Unix");break;
X case 4: printf("VM/CMS");break;
X case 5: printf("Atari");break;
X case 6: printf("OS/2");break;
X case 7: printf("Macintosh");break;
X default:
X printf("Unknown");
X }
X printf(" Version %d.%d\n",(Temp & 255)/10,(Temp & 255) % 10);
X
X Temp = rec.version_needed_to_extract;
X printf("Ver to extract : %d\n",Temp);
X
X printf("Bit flags : ");
X Temp = (rec.general_purpose_bit_flag & 3);
X if (Temp & 1)
X printf("Encrypted\n");
X if (rec.compression_method == 6) {
X printf("%dK sliding dictionary, ", (Temp & 2)? 8 : 4);
X printf("%d Shannon-Fano trees", (Temp & 4)? 3 : 2);
X }
X printf("\n");
X
X printf("Compression : %d\n",rec.compression_method);
X printf("Mod time :");
X printf("%2d:%02d%cm\n",
X (hh > 12 ? hh - 12 : hh), mm, (hh > 11 ? 'p' : 'a'));
X printf("Mod date :");
X printf("%2d %3s %02d\n", dy, mon[mo - 1], (yr + 80) % 100);
X printf("Crc32 : %d\n",~rec.crc32);
X printf("Compressed size : %d\n",rec.compressed_size);
X printf("Normal file size: %d\n",rec.uncompressed_size);
X printf("File name : %s.%s\n",filename,extra);
X printf("Comment size : %d\n",rec.file_comment_length);
X printf("Disk start # : %d\n",rec.disk_number_start);
X printf("File attributes : %d\n",rec.internal_file_attributes);
X printf("Os attributes : %d\n",rec.external_file_attributes);
X printf("Offset to header: %d\n",rec.relative_offset_local_header);
X printf("Comment : %s\n",comment);
X }
X
X if (list_zip) {
X Total_files++;
X Total_bytes += rec.uncompressed_size;
X Total_length += rec.compressed_size;
X
X printf("%-12s %8d ", filename,rec.uncompressed_size);
X if (verbose) {
X printf("%8d ",rec.compressed_size);
X if (rec.compressed_size)
X printf("%3d%% ",100L - (100L * rec.compressed_size)/
X rec.uncompressed_size);
X else
X printf("--- ");
X }
X
X printf("%2d %3s %02d", dy, mon[mo - 1], (yr + 80) % 100);
X
X if (verbose)
X printf(" %2d:%02d%cm",
X (hh > 12 ? hh - 12 : hh), mm, (hh > 11 ? 'p' : 'a'));
X printf("\n");
X }
X
X}
X
X
X/* ---------------------------------------------------------- */
X
Xvoid process_end_central_dir()
X{
X end_central_dir_record rec;
X
X rec.number_this_disk = get_word();
X rec.number_disk_with_start_central_directory = get_word();
X rec.total_entries_central_dir_on_this_disk = get_word();
X rec.total_entries_central_dir = get_word();
X rec.size_central_directory = get_long();
X rec.offset_start_central_directory = get_long();
X rec.zipfile_comment_length = get_word();
X
X comment = (byte *) (realloc(comment, rec.zipfile_comment_length));
X get_string(rec.zipfile_comment_length,comment);
X
X if (debugging) {
X printf("\n\nProcess END_CENTRAL directory header.\n");
X printf("This disk : %d\n",rec.number_this_disk);
X printf("Starting disk : %d\n",
X rec.number_disk_with_start_central_directory);
X printf("Total this disk : %d\n",
X rec.total_entries_central_dir_on_this_disk);
X printf("Total entries : %d\n",rec.total_entries_central_dir);
X printf("Central dir size: %d\n",rec.size_central_directory);
X printf("Offset to dir : %d\n",rec.offset_start_central_directory);
X printf("Comment size : %d\n",rec.zipfile_comment_length);
X printf("Comment : %s\n",comment);
X }
X}
X
X
X/* ---------------------------------------------------------- */
X
Xvoid process_headers()
X{
X int i;
X char sig[4];
X
X if (list_zip) {
X if (verbose) {
X printf("\nName Length Size now SF Date Time");
X printf("\n============ ======== ======== ==== ========= ========\n");
X } else {
X printf("\nName Length Date");
X printf("\n============ ======== =========\n");
X }
X }
X
X while (1)
X {
X for (i=0; i<4; i++) /* Read the ZIP file sig */
X sig[i] = get_byte();
X
X if (strncmp(sig,local_file_header_signature,4) == 0)
X process_local_file_header();
X else
X if (strncmp(sig,central_file_header_signature,4) == 0)
X process_central_file_header();
X else
X if (strncmp(sig,end_central_dir_signature,4) == 0)
X {
X process_end_central_dir();
X if (test_zip) {
X if (numbad < 1)
X printf("No errors detected\n");
X else
X if (numbad == 1)
X printf("One error detected\n");
X else
X printf("%d errors detected\n",numbad);
X }
X if (list_zip) {
X if (verbose) {
X printf(" ==== ======== ======== ==== \n");
X printf("Total: %4d %8d %8d ",
X Total_files,Total_bytes,Total_length);
X if (Total_length)
X printf("%3d%%\n", 100 - (100 * Total_length)/
X Total_bytes);
X else
X printf("---\n");
X } else {
X printf(" ==== ========\n");
X printf("Total: %4d %8d\n",
X Total_files,Total_bytes);
X }
X }
X if (strlen(comment) && dsp_comment)
X printf("%s\n",comment);
X return;
X }
X else
X {
X printf("Invalid Zipfile Header\n");
X return;
X }
X }
X}
X
X
X
X/* ---------------------------------------------------------- */
X
Xvoid extract_zipfile()
X{
X /*
X * open the zipfile for reading and in BINARY mode to prevent cr/lf
X * translation, which would corrupt the bitstreams
X */
X
X if (open_input_file())
X exit(1);
X
X process_headers();
X
X close(zipfd);
X}
X
X
X/* ---------------------------------------------------------- */
X/*
X * main program
X *
X */
X
Xvoid main(argc, argv)
Xint argc;
Xchar **argv;
X{
X
X#ifdef USE_GETOPT
X int c; /* next option letter */
X int count = 0; /* count of required options seen */
X
X extern int optind; /* from getopt: next arg to process */
X extern int opterr; /* used by getopt */
X extern char *optarg;
X
X opterr = 0; /* so getopt won't print err msg */
X
X while ((c = getopt (argc, argv, "cdltuv")) != EOF)
X {
X switch (c) {
X case 'c': dsp_comment =0; break;
X case 'd': debugging++;dsp_comment =0; break;
X case 'l': list_zip =1;extract =0; break;
X case 't': test_zip =1;extract =0; break;
X case 'u': unixfy =0; break;
X case 'v': verbose++; break;
X default: short_help();
X }
X }
X
X if (argv[optind] != NULL)
X strcpy(zipfn,argv[optind]);
X else
X long_help();
X
X /* .ZIP default if none provided by user */
X if (STRCHR(zipfn,'.') == NULL)
X strcat(zipfn,".zip");
X#else
X if (argc != 2)
X long_help();
X
X /* .ZIP default if none provided by user */
X strcpy(zipfn, argv[1]);
X if (STRCHR(zipfn, '.') == NULL)
X strcat(zipfn, ".zip");
X#endif
X
X /* allocate i/o buffers */
X inbuf = (byte *) (malloc(INBUFSIZ));
X outbuf = (byte *) (malloc(OUTBUFSIZ));
X comment = (byte *) (malloc(STRSIZ));
X if ((inbuf == NULL) || (outbuf == NULL) || (comment == NULL)) {
X printf("Can't allocate buffers!\n");
X exit(1);
X }
X
X /* do the job... */
X extract_zipfile();
X exit(0);
X}
X
Xlong_help()
X{
Xprintf("\nUnZip: Zipfile Extract Version:%s Patchlevel:%d",VERSION,PATCH);
Xprintf("; (C) 1989 Samuel H. Smith\n");
Xprintf("Courtesy of: S.H.Smith and The Tool Shop BBS, (602) 279-2673.");
Xprintf("\n\n");
Xprintf("UNIX mods by: Michael Enkelis\n\n");
Xprintf("You may copy and distribute this program freely, provided that:\n");
Xprintf(" 1) No fee is charged for such copying and distribution, and\n");
Xprintf(" 2) It is distributed ONLY in its original, unmodified state.");
Xprintf("\n\n");
Xprintf("If you wish to distribute a modified version of this program, you MUST\n");
Xprintf("include the source code.\n\n");
Xprintf("If you modify this program, I would appreciate a copy of the new source\n");
Xprintf("code. I am holding the copyright on the source code, so please don't\n");
Xprintf("delete my name from the program files or from the documentation.\n\n");
Xprintf("IN NO EVENT WILL I BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST\n");
Xprintf("PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES\n");
Xprintf("ARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM, OR FOR ANY\n");
Xprintf("CLAIM BY ANY OTHER PARTY.\n\n");
Xshort_help();
Xexit(1);
X}
X
Xshort_help()
X{
X printf("Usage: UnZip -chltuv FILE[.zip]\n\n");
X printf(" -c Don't display coments.\n");
X printf(" -h This help listing.\n");
X printf(" -l List zip archive.\n");
X printf(" -t Test zip archive.\n");
X printf(" -u Don't convert filenames to lowercase.\n");
X printf(" -v Verbose output.\n\n");
X exit(1);
X}
SHAR_EOF
if test 43256 -ne "`wc -c < 'unzipbsd.c'`"
then
echo shar: error transmitting "'unzipbsd.c'" '(should have been 43256 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'crc32.c'" '(7120 characters)'
if test -f 'crc32.c'
then
echo shar: will not over-write existing file "'crc32.c'"
else
sed 's/^ X//' << \SHAR_EOF > 'crc32.c'
X
X /* ============================================================= */
X /* COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or */
X /* code or tables extracted from it, as desired without restriction. */
X /* */
X /* First, the polynomial itself and its table of feedback terms. The */
X /* polynomial is */
X /* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
X /* */
X /* Note that we take it "backwards" and put the highest-order term in */
X /* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
X /* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
X /* the MSB being 1. */
X /* */
X /* Note that the usual hardware shift register implementation, which */
X /* is what we're using (we're merely optimizing it by doing eight-bit */
X /* chunks at a time) shifts bits into the lowest-order term. In our */
X /* implementation, that means shifting towards the right. Why do we */
X /* do it this way? Because the calculated CRC must be transmitted in */
X /* order from highest-order term to lowest-order term. UARTs transmit */
X /* characters in order from LSB to MSB. By storing the CRC this way, */
X /* we hand it to the UART in the order low-byte to high-byte; the UART */
X /* sends each low-bit to hight-bit; and the result is transmission bit */
X /* by bit from highest- to lowest-order term without requiring any bit */
X /* shuffling on our part. Reception works similarly. */
X /* */
X /* The feedback terms table consists of 256, 32-bit entries. Notes: */
X /* */
X /* The table can be generated at runtime if desired; code to do so */
X /* is shown later. It might not be obvious, but the feedback */
X /* terms simply represent the results of eight shift/xor opera- */
X /* tions for all combinations of data and CRC register values. */
X /* */
X /* The values must be right-shifted by eight bits by the "updcrc" */
X /* logic; the shift must be unsigned (bring in zeroes). On some */
X /* hardware you could probably optimize the shift in assembler by */
X /* using byte-swap instructions. */
X /* polynomial $edb88320 */
X /* */
X /* -------------------------------------------------------------------- */
X
Xlong crc_32_tab[] = {
X 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
X 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
X 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
X 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
X 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
X 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
X 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
X 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
X 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
X 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
X 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
X 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
X 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
X 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
X 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
X 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
X 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
X 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
X 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
X 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
X 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
X 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
X 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
X 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
X 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
X 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
X 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
X 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
X 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
X 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
X 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
X 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
X 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
X 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
X 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
X 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
X 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
X 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
X 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
X 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
X 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
X 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
X 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
X 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
X 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
X 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
X 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
X 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
X 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
X 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
X 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
X 0x2d02ef8dL
X };
X
X/* ------------------------------------------------------------- */
X
Xextern long crc32val;
X
Xvoid UpdateCRC(s, len)
Xregister char *s;
Xregister int len;
X /* update running CRC calculation with contents of a buffer */
X{
X int i;
X for (i = 0; i < len; i ++) {
X crc32val = crc_32_tab[(int) ((crc32val) ^ (s[i])) & 0xff] ^
X (((crc32val) >> 8) & 0x00FFFFFFL);
X }
X}
SHAR_EOF
if test 7120 -ne "`wc -c < 'crc32.c'`"
then
echo shar: error transmitting "'crc32.c'" '(should have been 7120 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'patchlevel.h'" '(16 characters)'
if test -f 'patchlevel.h'
then
echo shar: will not over-write existing file "'patchlevel.h'"
else
sed 's/^ X//' << \SHAR_EOF > 'patchlevel.h'
X#define PATCH 3
SHAR_EOF
if test 16 -ne "`wc -c < 'patchlevel.h'`"
then
echo shar: error transmitting "'patchlevel.h'" '(should have been 16 characters)'
fi
fi # end of overwriting check
echo shar: extracting "'unzip.doc'" '(3086 characters)'
if test -f 'unzip.doc'
then
echo shar: will not over-write existing file "'unzip.doc'"
else
sed 's/^ X//' << \SHAR_EOF > 'unzip.doc'
X
X UnZip
X
X Version 2.0.1, 09-16-89
X
X Zipfile Extract Utility
X
X Copyright (C) 1989 Samuel H. Smith; ALL RIGHTS RESERVED
X
X
X'UnZip' is a small Zipfile extract utility. It is written to be as
Xsmall and portable as possible -- ideal as a starting point for handling
X.ZIP files in non-IBM environments.
X
XSource code is provided in C and Turbo Pascal. If you port this program
Xto a non-IBM system, I would appreciate a copy of the ported source and
Xexec files.
X
X
XUsage
X-----
X unz filename[.zip] ;pascal language version
X unzip filename[.zip] ;C language version
X
X
XRevision history
X----------------
X
X3-3-89
X Initial alpha test release.
X
X3-5-89
X First fully operational release. Does not implement CRC verification,
X but should correctly unzip all compression methods.
X
X3-6-89
X Corrected end-of-file detection in both shrink and reduce expanders.
X Resulting files should now always have the correct size. Added ".ZIP"
X default to unzip.c to match calling conventions of unz.pas.
X
X3-8-89
X Moved machine and operating-system specific code to a block starting
X around line 180. Added code to swap bytes on host machines that
X store the high order bytes in lower address locations than the low
X order bytes.
X
X3-15-89
X Added CRC checking in UNZIP.C. Speeded operation by about 150%.
X
X I'm spending my time on the C version now and don't plan to do any
X further work on the pascal. If you're using the pascal version
X please contact me.
X
X9-9-89
X Addition of new "un-implode" logic to handle new compression format
X included with PKZ101.
X
X
X
XLICENSE
X=======
X
XYou may copy and distribute this program freely, provided that:
X 1) No fee is charged for such copying and distribution, and
X 2) It is distributed ONLY in its original, unmodified state.
X
XIf you wish to distribute a modified version of this program, you MUST
Xinclude the source code.
X
XIf you modify this program, I would appreciate a copy of the new source
Xcode. I am holding the copyright on the source code, so please don't
Xdelete my name from the program files or from the documentation.
X
X
XSUPPORT
X=======
X
XI work very hard to produce a software package of the highest quality
Xand functionality. I try to look into all reported bugs, and will
Xgenerally fix reported problems within a few days.
X
XIN NO EVENT WILL I BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST
XPROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES
XARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM, OR FOR ANY
XCLAIM BY ANY OTHER PARTY.
X
XIf you have any questions, bugs, or suggestions, please contact me at:
X
X The Tool Shop BBS
X (602) 279-2673 (FREE LINE, USR 2400)
X (602) 264-3969 (HST 9600)
X (602) 270-0239 (HAYES 9600)
X
XThe latest version is always available for downloading. (Except
Xpossibly this portable version.)
X
XEnjoy! Samuel H. Smith
X Author and Sysop of The Tool Shop.
X
SHAR_EOF
if test 3086 -ne "`wc -c < 'unzip.doc'`"
then
echo shar: error transmitting "'unzip.doc'" '(should have been 3086 characters)'
fi
fi # end of overwriting check
# End of shell archive
exit 0
--
_ _ _ __
' ) ) ) / /) / ` / /) Michael Enkelis
/ / / o _. /_ __. _ // /-- __ /_ _ // o _ tektronix!vice!michaele
/ ' (_(_(__/ /_(_(_(<_(/_ (___, /) )_/ <_(<_(/_(_/_)_ (503) 627-4099
More information about the Alt.sources
mailing list