Official patch #13 for mp v2.4; please apply it.
Rich Burridge
richb at sunaus.oz
Wed Oct 3 15:36:16 AEST 1990
This is official patch #13 for mp v2.4.
CONTENTS:
1. What is mp?
2/ Changes made in this patch.
3/ How to install this patch.
4/ How to get previous patches.
----------------
1/ What is mp?
Mp is a Postscript pretty printer for mail,news and ordinary files.
Mp v2.4 was posted to comp.sources.misc about three weeks ago at patchlevel #5.
----------------
2/ Changes made in this patch.
* The other PostScript prologue files need to be modified in a similar
way, to mp.pro.ps (changed in patch #12).
* The meaning of the -PS switch to mp has been reversed. If you don't
specify -PS on the command line, and mp finds a PostScript file as
the body of the message, then it will just dump it out. Specifying
-PS causes it to be printed as text.
* From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
Further modifications to mailp:
- If the user had specified a flag of "-sThis is my subject" then it
wouldn't have printed correctly.
- If the user tries to print files with tabs or spaces in them there
would have been problems.
* From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
Specifying "mp -o -F <mailfile" causes mp to dump core.
----------------
3/ How to install this patch.
Apply the patch with Larry Wall's patch program. Copy Makefile.dist to
Makefile and adjust for your site. Then do a "make". If your site uses
US Letter paper size, then do a "make install". If your site uses A4 paper
size, then do a "make install-a4". You will probably have to be super-user
to do this. You might wish to reread the installation section in the README
file to make sure you've adjusted everything in the Makefile that you need to.
----------------
4/ How to get previous patches.
If you need to get patches 6-12, then they can be obtained from the automatic
mail archive server, by sending a message to rb-archive-server at Aus.Sun.COM
containing the line:
send mp patchn
where n is the patch number you require.
The latest complete mp distribution (fully patched) can be obtained from the
same address, by sending a message containing the lines:
send mp part1
send mp part2
If the mail is likely to go back through any sites that impose a size limit,
then I suggest you divide the above request up into two separate mail
messages.
You can also include a path line in these requests to indicate the mail
path that the archive server should use to send the files to you. Such a
path line could be:
path uunet.uu.net!hostname!user
Note that this is uunet.uu.net and not just uunet. Sun.COM doesn't recognise
just uunet.
[NOTE: When unpacking the shars generated by the automatic mail service,
it is possible you will get error messages for incorrect length.
Please ignore; hopefully the files should still unpack correctly].
Rich Burridge, DOMAIN: richb at Aus.Sun.COM
Sun Microsystems. ACSNET: richb at sunaus.sun.oz
PHONE: +61 2 413 2666 UUCP: {uunet,mcvax,ukc}!munnari!sunaus.oz!richb
------CUT HERE------patch.13------CUT HERE------
------- README -------
*** /tmp/da05022 Wed Oct 3 15:32:21 1990
--- README Wed Oct 3 14:52:46 1990
***************
*** 160,167 ****
Amos Shapir, Bruce G Barnett, Pauline van Winsen, James F. Blake, Bruno
Pillard, Rainer Klute, Ran Ever-Hadani, Lupe Christoph, John Little, Bill
Houle, Paul Eggert, Larry W. Virden, Peter Collinson, Jim Sanchez, Ian
! Young, Andreas Wettengel, Sato Toshihiko and Geoff Mulligan for bug reports
! and/or bug fixes plus enhancements.
My thanks also goes to Glenn Reid from Adobe Systems for the backspacefont.ps
code used in the prologue files. I'm grateful to all these people, plus
--- 160,167 ----
Amos Shapir, Bruce G Barnett, Pauline van Winsen, James F. Blake, Bruno
Pillard, Rainer Klute, Ran Ever-Hadani, Lupe Christoph, John Little, Bill
Houle, Paul Eggert, Larry W. Virden, Peter Collinson, Jim Sanchez, Ian
! Young, Andreas Wettengel, Sato Toshihiko, Geoff Mulligan, Andy Norman and
! Paul Higgins for bug reports and/or bug fixes plus enhancements.
My thanks also goes to Glenn Reid from Adobe Systems for the backspacefont.ps
code used in the prologue files. I'm grateful to all these people, plus
------- mailp -------
*** /tmp/da05025 Wed Oct 3 15:32:21 1990
--- mailp Wed Oct 3 14:55:41 1990
***************
*** 43,49 ****
FLAGS="$FLAGS -s \"$2\""
shift
else
! FLAGS="$FLAGS $1"
fi
STDIN=
;;
--- 43,49 ----
FLAGS="$FLAGS -s \"$2\""
shift
else
! FLAGS="$FLAGS \"$1\""
fi
STDIN=
;;
***************
*** 53,59 ****
-F | -l)
FLAGS="$FLAGS $1"
;;
! * ) FILES="$FILES $1"
;;
esac
shift
--- 53,59 ----
-F | -l)
FLAGS="$FLAGS $1"
;;
! * ) FILES="$FILES \"$1\""
;;
esac
shift
------- mp.pro.ff.ps -------
*** /tmp/da05028 Wed Oct 3 15:32:22 1990
--- mp.pro.ff.ps Wed Oct 3 15:18:09 1990
***************
*** 68,75 ****
-50 filoheight neg translate
/newpage % page_number newpage --
! { pop
!
gsave % save state for easy restore
margin 0 translate
/ypos filoheight 110 sub def
--- 68,76 ----
-50 filoheight neg translate
/newpage % page_number newpage --
! {
! pop % pageno
! /PageSave save def
gsave % save state for easy restore
margin 0 translate
/ypos filoheight 110 sub def
***************
*** 77,88 ****
} def
/endpage % page_number endpage --
! { pop % get rid of page_number
showpage
grestore
} def
! /endfile { } def % -- endfile --
/endcol % page_number column_number endcol --
{
--- 78,99 ----
} def
/endpage % page_number endpage --
! {
! pop % get rid of page_number
! PageSave restore % restore *always* before showpage
showpage
grestore
} def
! /newfile
! {
! /FileSave save def % file-level save...
! } def
!
! /endfile
! {
! FileSave restore % ...and restore
! } def
/endcol % page_number column_number endcol --
{
------- mp.pro.tm.ps -------
*** /tmp/da05031 Wed Oct 3 15:32:22 1990
--- mp.pro.tm.ps Wed Oct 3 15:12:54 1990
***************
*** 68,75 ****
-50 filoheight neg translate
/newpage % page_number newpage --
! { pop
!
gsave % save state for easy restore
margin 0 translate
/ypos filoheight 110 sub def
--- 68,76 ----
-50 filoheight neg translate
/newpage % page_number newpage --
! {
! pop % pageno
! /PageSave save def
gsave % save state for easy restore
margin 0 translate
/ypos filoheight 110 sub def
***************
*** 77,88 ****
} def
/endpage % page_number endpage --
! { pop % get rid of page_number
showpage
grestore
} def
! /endfile { } def % -- endfile --
/endcol % page_number column_number endcol --
{
--- 78,99 ----
} def
/endpage % page_number endpage --
! {
! pop % get rid of page_number
! PageSave restore % restore *always* before showpage
showpage
grestore
} def
! /newfile
! {
! /FileSave save def % file-level save...
! } def
!
! /endfile
! {
! FileSave restore % ...and restore
! } def
/endcol % page_number column_number endcol --
{
------- main.c -------
*** /tmp/da05034 Wed Oct 3 15:32:23 1990
--- main.c Wed Oct 3 15:05:18 1990
***************
*** 55,61 ****
bool folder = FALSE ; /* Set if we are printing a mail folder. */
bool landscape = FALSE ; /* Set if we are printing in landscape mode. */
bool print_orig = FALSE ; /* Print From rather than To in mail header. */
! bool print_ps = FALSE ; /* Print PostScript files if set. */
bool text_doc = FALSE ; /* Printing normal text (-o) */
/* Header definitions. */
--- 55,61 ----
bool folder = FALSE ; /* Set if we are printing a mail folder. */
bool landscape = FALSE ; /* Set if we are printing in landscape mode. */
bool print_orig = FALSE ; /* Print From rather than To in mail header. */
! bool print_ps = TRUE ; /* Print PostScript files if set. */
bool text_doc = FALSE ; /* Printing normal text (-o) */
/* Header definitions. */
------- misc.c -------
*** /tmp/da05037 Wed Oct 3 15:32:24 1990
--- misc.c Wed Oct 3 15:04:59 1990
***************
*** 121,127 ****
case 'o' : text_doc = TRUE ; /* Print ordinary text file */
break ;
case 'P' : if (!strcmp(optarg, "S")) /* Print PostScript files. */
! print_ps = TRUE ;
break ;
case 'p' : if (strlen(optarg))
STRCPY(proname, optarg) ; /* New prologue file. */
--- 121,127 ----
case 'o' : text_doc = TRUE ; /* Print ordinary text file */
break ;
case 'P' : if (!strcmp(optarg, "S")) /* Print PostScript files. */
! print_ps = FALSE ;
break ;
case 'p' : if (strlen(optarg))
STRCPY(proname, optarg) ; /* New prologue file. */
------- print.c -------
*** /tmp/da05040 Wed Oct 3 15:32:24 1990
--- print.c Wed Oct 3 15:31:17 1990
***************
*** 118,124 ****
if (article == TRUE)
message_for = "Article from" ; /* MailFor. */
! else if (print_orig == TRUE)
message_for = "From" ;
psdef("MailFor", message_for) ;
--- 118,124 ----
if (article == TRUE)
message_for = "Article from" ; /* MailFor. */
! else if (print_orig == TRUE && from != NULL)
message_for = "From" ;
psdef("MailFor", message_for) ;
***************
*** 131,137 ****
STRNCPY(owner, newsgroups, i) ;
owner[i] = '\0' ;
}
! else if (print_orig == TRUE)
{
i = strlen(from) ;
owner = (char *) realloc(owner, (unsigned int) i) ;
--- 131,137 ----
STRNCPY(owner, newsgroups, i) ;
owner[i] = '\0' ;
}
! else if (print_orig == TRUE && from != NULL)
{
i = strlen(from) ;
owner = (char *) realloc(owner, (unsigned int) i) ;
------- CHANGES -------
*** /tmp/da05043 Wed Oct 3 15:32:25 1990
--- CHANGES Wed Oct 3 15:27:38 1990
***************
*** 427,434 ****
Modified the mailp script to work on SysV which usually has no lpr.
* From Bruce Barnett <barnett at unclejack.crd.ge.com>
! When you do a "make", occurances of BINDIR in the mailp shell script,
! are now replaced with the value of $(BINDIR) from the Makefile.
* From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
Modifications to Makefile.dist
--- 427,434 ----
Modified the mailp script to work on SysV which usually has no lpr.
* From Bruce Barnett <barnett at unclejack.crd.ge.com>
! When you do a "make install", occurances of BINDIR in the mailp shell
! script, are now replaced with the value of $(BINDIR) from the Makefile.
* From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
Modifications to Makefile.dist
***************
*** 449,451 ****
--- 449,473 ----
Mp is now case insensitive about mail header lines. The first word
of the line is now converted to lower-case before doing a comparison.
The first letter of each header is capitalised when printing.
+
+ v2.4 - patchlevel 13. - 3rd October 1990.
+
+ * The other PostScript prologue files need to be modified in a similar
+ way, to mp.pro.ps (changed in patch #12).
+
+ * The meaning of the -PS switch to mp has been reversed. If you don't
+ specify -PS on the command line, and mp finds a PostScript file as
+ the body of the message, then it will just dump it out. Specifying
+ -PS causes it to be printed as text.
+
+ * From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
+ Further modifications to mailp:
+
+ - If the user had specified a flag of "-sThis is my subject" then it
+ wouldn't have printed correctly.
+
+ - If the user tries to print files with tabs or spaces in them there
+ would have been problems.
+
+ * From Larry Virden <lwv27%CAS at pucc.PRINCETON.EDU>
+ Specifying "mp -o -F <mailfile" causes mp to dump core.
------- patchlevel.h -------
*** /tmp/da05046 Wed Oct 3 15:32:26 1990
--- patchlevel.h Wed Oct 3 14:46:10 1990
***************
*** 14,17 ****
* reported to me then an attempt will be made to fix them.
*/
! #define PATCHLEVEL 12
--- 14,17 ----
* reported to me then an attempt will be made to fix them.
*/
! #define PATCHLEVEL 13
------- mp.pro.ts.ps -------
*** /tmp/da05049 Wed Oct 3 15:32:26 1990
--- mp.pro.ts.ps Wed Oct 3 15:16:59 1990
***************
*** 72,79 ****
-50 tmsysheight neg translate
/newpage % page_number newpage --
! { pop
!
gsave % save state for easy restore
margin 0 translate
/ypos tmsysheight 110 sub def
--- 72,80 ----
-50 tmsysheight neg translate
/newpage % page_number newpage --
! {
! pop % pageno
! /PageSave save def
gsave % save state for easy restore
margin 0 translate
/ypos tmsysheight 110 sub def
***************
*** 81,92 ****
} def
/endpage % page_number endpage --
! { pop % get rid of page_number
showpage
grestore
} def
! /endfile { } def % -- endfile --
/endcol % page_number column_number endcol --
{
--- 82,103 ----
} def
/endpage % page_number endpage --
! {
! pop % get rid of page_number
! PageSave restore % restore *always* before showpage
showpage
grestore
} def
! /newfile
! {
! /FileSave save def % file-level save...
! } def
!
! /endfile
! {
! FileSave restore % ...and restore
! } def
/endcol % page_number column_number endcol --
{
------- mp.man -------
*** /tmp/da05052 Wed Oct 3 15:32:27 1990
--- mp.man Wed Oct 3 15:00:56 1990
***************
*** 99,105 ****
.TP
.B \-PS
If the mail or digest message just has PostScript as the text of the message,
! then this is passed straight through, and not printed as text.
.TP
.B \-a
Format the file as a news article.
--- 99,106 ----
.TP
.B \-PS
If the mail or digest message just has PostScript as the text of the message,
! then this is normally just passed straight through. Specifying this option,
! causes PostScript to be printed as text.
.TP
.B \-a
Format the file as a news article.
------- mp.pro.alt.ps -------
*** /tmp/da05055 Wed Oct 3 15:32:27 1990
--- mp.pro.alt.ps Wed Oct 3 15:17:57 1990
***************
*** 85,94 ****
/endpage % page_number endpage --
{
showpage % display it
} def
! /endfile { } def % nothing needed
/endcol % page_number col_number endcol --
{
--- 85,104 ----
/endpage % page_number endpage --
{
+ pop % unused
+ PageSave restore % restore *always* before showpage
showpage % display it
} def
! /newfile
! {
! /FileSave save def % file-level save...
! } def
!
! /endfile
! {
! FileSave restore % ...and restore
! } def
/endcol % page_number col_number endcol --
{
***************
*** 122,127 ****
--- 132,138 ----
/newpage % page_number newpage --
{
pop % pageno
+ /PageSave save def
LandscapeMode {setlandscape} if
/lct 0 def
/ypos topedge 92 sub def
------- mp.pro.l.ps -------
*** /tmp/da05058 Wed Oct 3 15:32:28 1990
--- mp.pro.l.ps Wed Oct 3 14:50:55 1990
***************
*** 86,96 ****
/endpage % page_number endpage --
{
showpage % display it
} def
! /endfile { } def % nothing needed
/endcol % page_number col_number endcol --
{
pop % get rid of column number
--- 86,106 ----
/endpage % page_number endpage --
{
+ pop % unused
+ PageSave restore % restore *always* before showpage
showpage % display it
} def
! /newfile
! {
! /FileSave save def % file-level save...
! } def
+ /endfile
+ {
+ FileSave restore % ...and restore
+ } def
+
/endcol % page_number col_number endcol --
{
pop % get rid of column number
***************
*** 133,138 ****
--- 143,149 ----
/newpage
{
pop
+ /PageSave save def
LandscapeMode
{
612 0 translate
More information about the Comp.sources.bugs
mailing list