v15i070: dmake version 3.6 (part 18/25)
Dennis Vadura
dvadura at watdragon.waterloo.edu
Mon Oct 15 11:43:57 AEST 1990
Posting-number: Volume 15, Issue 70
Submitted-by: Dennis Vadura <dvadura at watdragon.waterloo.edu>
Archive-name: dmake-3.6/part18
#!/bin/sh
# this is part 18 of a multipart archive
# do not concatenate these parts, unpack them in order with /bin/sh
# file man/dmake.nc continued
#
CurArch=18
if test ! -r s2_seq_.tmp
then echo "Please unpack part 1 first!"
exit 1; fi
( read Scheck
if test "$Scheck" != $CurArch
then echo "Please unpack part $Scheck next!"
exit 1;
else exit 0; fi
) < s2_seq_.tmp || exit 1
echo "x - Continuing file man/dmake.nc"
sed 's/^X//' << 'SHAR_EOF' >> man/dmake.nc
X target file name with a trailing ,v attached to the previous
X result.
X
X dmake can also infer indirect prerequisites. An inferred
X target can have a list of prerequisites added that will not
X show up in the value of $< but will show up in the value of
X $? and $&. Indirect prerequisites are specified in an
X inference rule by quoting the prerequisite with single
X quotes. For example, if you had the explicit dependency:
X
X fred.o : fred.c ; rule to make fred.o
X fred.o : local.h
X
X then this can be infered for fred.o from the following
X inference rule:
X
X %.o : %.c 'local.h' ; rule to make a .o from a .c
X
X You may infer indirect prerequisites that are a function of
X
X
X
XVersion 3.50 UW 33
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X the value of '%' in the current rule. The meta-rule:
X
X %.o : %.c '$(INC)/%.h' ; rule to make a .o from a .c
X
X infers an indirect prerequisite found in the INC directory
X whose name is the same as the expansion of $(INC), and the
X prerequisite name depends on the base name of the current
X target. The set of indirect prerequisites is attached to
X the meta rule in which they are specified and are inferred
X only if the rule is used to infer a recipe for a target.
X They do not play an active role in driving the inference
X algorithm. The construct:
X
X %.o : %.c %.f 'local.h'; recipe
X
X is equivalent to:
X
X %.o : %.c 'local.h' : recipe
X %.o : %.f 'local.h' : recipe
X
X
X If any of the attributes .SETDIR, .EPILOG, .PROLOG, .SILENT,
X .USESHELL, .SWAP, .PRECIOUS, .LIBRARY, and .IGNORE are given
X for a %-rule then when that rule is bound to a target as the
X result of an inference, the target's set of attributes is
X augmented by the attributes from the above set that are
X specified in the bound %-rule. Other attributes specified
X for %-meta rules are not inherited by the target. The .SET-
X DIR attribute is treated in a special way. If the target
X already had a .SETDIR attribute set and the bound %-rule
X also specified a .SETDIR attribute then the one originally
X specified with the target prevails. During inference any
X .SETDIR attributes for the inferred prerequisite are
X honored. The directories must exist for a %-meta rule to be
X selected as a possible inference path. If the directories
X do not exist no error message is issued, instead the
X corresponding path in the inference graph is simply
X rejected.
X
X dmake also supports the old format special target
X .<suffix>.<suffix> by identifying any rules of this form and
X mapping them to the appropriate %-rule. So for example if
X an old makefile contains the construct:
X
X .c.o :; cc -c $< -o $@
X
X dmake maps this into the following %-rule:
X
X %.o : %.c; cc -c $< -o $@
X
X Furthermore, dmake understands several SYSV AUGMAKE special
X targets and maps them into corresponding %-meta rules.
X
X
X
XVersion 3.50 UW 34
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X These transformation must be enabled by providing the -A
X flag on the command line or by setting the value of AUGMAKE
X to non NULL. The construct
X
X .suff :; recipe
X
X gets mapped into:
X
X % : %.suff; recipe
X
X and the construct
X
X .c~.o :; recipe
X
X gets mapped into:
X
X %.o : s.%.c ; recipe
X
X In general, a special target of the form .<str>~ is replaced
X by the %-rule construct s.%.<str>, thereby providing support
X for the syntax used by SYSV AUGMAKE for providing SCCS sup-
X port. When enabled, these mappings allow processing of
X existing SYSV makefiles without modifications.
X
X dmake bases all of it's inferences on the inference graph
X constructed from the %-rules defined in the makefile. It
X knows exactly which targets can be made from which prere-
X quisites by making queries on the inference graph. For this
X reason .SUFFIXES is not needed and is completely ignored.
X
X For a %-meta rule to be inferred as the rule whose recipe
X will be used to make a target, the target's name must match
X the %-target pattern, and any inferred %-prerequisite must
X already exist or have an explicit recipe so that the prere-
X quisite can be made. Without transitive closure on the
X inference graph the above rule describes precisely when an
X inference match terminates the search. If transitive clo-
X sure is enabled (the usual case), and a prerequisite does
X not exist or cannot be made, then dmake invokes the infer-
X ence algorithm recursively on the prerequisite to see if
X there is some way the prerequisite can be manufactured. For
X if the prerequisite can be made then the current target can
X also be made using the current %-meta rule. This means that
X there is no longer a need to give a rule for making a .o
X from a .y if you have already given a rule for making a .o
X from a .c and a .c from a .y. In such cases dmake can infer
X how to make the .o from the .y via the intermediary .c and
X will remove the .c when the .o is made. Transitive closure
X can be disabled by giving the -T switch on the command line.
X
X A word of caution. dmake bases its transitive closure on
X the %-meta rule targets. When it performs transitive
X
X
X
XVersion 3.50 UW 35
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X closure it infers how to make a target from a prerequisite
X by performing a pattern match as if the potential prere-
X quisite were a new target. The set of rules:
X
X %.o : %.c :; rule for making .o from .c
X %.c : %.y :; rule for making .c from .y
X % : RCS/%,v :; check out of RCS file
X
X will, by performing transitive closure, allow dmake to infer
X how to make a .o from a .y using a .c as an intermediate
X temporary file. Additionally it will be able to infer how
X to make a .y from an RCS file, as long as that RCS file is
X in the RCS directory and has a name which ends in .y,v. The
X transitivity computation is performed dynamically for each
X target that does not have a recipe. This has potential to
X be very slow if the %-meta rules are not carefully speci-
X fied. The .NOINFER attribute is used to mark a %-meta node
X as being a final target during inference. Any node with
X this attribute set will not be used for subsequent infer-
X ences. As an example the node RCS/%,v is marked as a final
X node since we know that if the RCS file does not exist there
X likely is no other way to make it. Thus the standard
X startup makefile contains the entry:
X .NOINFER : RCS/%,v
X Thereby indicating that the RCS file is the end of the
X inference chain.
X
X dmake tries to remove intermediate files resulting from
X transitive closure if the file is not marked as being PRE-
X CIOUS, or the -u flag was not given on the command line, and
X if the inferred intermediate did not previously exist.
X Intermediate targets that existed prior to being made are
X never removed. This is in keeping with the philosophy that
X dmake should never remove things from the file system that
X it did not add. If the special target .REMOVE is defined
X and has a recipe then dmake constructs a list of the inter-
X mediate files to be removed and makes them prerequisites of
X .REMOVE. It then makes .REMOVE thereby removing the prere-
X quisites if the recipe of .REMOVE says to. Typically
X .REMOVE is defined in the startup file as:
X
X ".REMOVE :; $(RM) $<".
X
XMAKING TARGETS
X In order to update a target dmake must execute a recipe.
X When a recipe needs to be executed it is first expanded so
X that any macros in the recipe text are expanded, and it is
X then either executed directly or passed to a shell. dmake
X supports two types of recipes. The regular recipes and
X group recipes.
X
X
X
X
X
XVersion 3.50 UW 36
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X When a regular recipe is invoked dmake executes each line of
X the recipe separately using a new copy of a shell if a shell
X is required. Thus effects of commands do not generally per-
X sist across recipe lines. (e.g. cd requests in a recipe
X line do not carry over to the next recipe line) The decision
X on whether a shell is required to execute a command is based
X on the value of the macro SHELLMETAS or on the specification
X of '+' or .USESHELL for the current recipe or target respec-
X tively. If any character in the value of SHELLMETAS is
X found in the expanded recipe text-line or the use of a shell
X is requested explicitly via '+' or .USESHELL then the com-
X mand is executed using a shell, otherwise the command is
X executed directly. The shell that is used for execution is
X given by the value of the macro SHELL. The flags that are
X passed to the shell are given by the value of SHELLFLAGS.
X Thus dmake constructs the command line:
X
X $(SHELL) $(SHELLFLAGS) $(expanded_recipe_command)
X
X Normally dmake writes the command line that it is about to
X invoke to standard output. If the .SILENT attribute is set
X for the target or for the recipe line (via @), then the
X recipe line is not echoed.
X
X Group recipe processing is similar to that of regular
X recipes, except that a shell is always invoked. The shell
X that is invoked is given by the value of the macro GROUP-
X SHELL, and its flags are taken from the value of the macro
X GROUPFLAGS. If a target has the .PROLOG attribute set then
X dmake prepends to the shell script the recipe associated
X with the special target .GROUPPROLOG, and if the attribute
X .EPILOG is set as well, then the recipe associated with the
X special target .GROUPEPILOG is appended to the script file.
X This facility can be used to always prepend a common header
X and common trailer to group recipes. Group recipes are
X echoed to standard output just like standard recipes, but
X are enclosed by lines beginning with [ and ].
X
XMAKING LIBRARIES
X Libraries are easy to maintain using dmake. A library is a
X file containing a collection of object files. Thus to make
X a library you simply specify it as a target with the
X .LIBRARY attribute set and specify its list of prere-
X quisites. The prerequisites should be the object members
X that are to go into the library. When dmake makes the
X library target it uses the .LIBRARY attribute to pass to the
X prerequisites the .LIBMEMBER attribute and the name of the
X library. This enables the file binding mechanism to look
X for the member in the library if an appropriate object file
X cannot be found. A small example best illustrates this.
X
X mylib.a .LIBRARY : mem1.o mem2.o mem3.o
X
X
X
XVersion 3.50 UW 37
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X rules for making library...
X # remember to remove .o's when lib is made
X
X # equivalent to: '%.o : %.c ; ...'
X .c.o :; rules for making .o from .c say
X
X dmake will use the .c.o rule for making the library members
X if appropriate .c files can be found using the search rules.
X NOTE: this is not specific in any way to C programs, they
X are simply used as an example.
X
X dmake tries to handle the old library construct format in a
X sensible way. The construct lib(member.o) is separated and
X the lib portion is declared as a library target. The new
X target is defined with the .LIBRARY attribute set and the
X member.o portion of the construct is declared as a prere-
X quisite of the lib target. If the construct lib(member.o)
X appears as a prerequisite of a target in the makefile, that
X target has the new name of the lib assigned as it's prere-
X quisite. Thus the following example:
X
X a.out : ml.a(a.o) ml.a(b.o); $(CC) -o $@ $<
X
X .c.o :; $(CC) -c $(CFLAGS) -o $@ $<
X %.a:
X ar rv $@ $<
X ranlib $@
X rm -rf $<
X
X constructs the following dependency graph.
X
X a.out : ml.a; $(CC) -o $@ $<
X ml.a .LIBRARY : a.o b.o
X
X %.o : %.c ; $(CC) -c $(CFLAGS) -o $@ $<
X %.a :
X ar rv $@ $<
X ranlib $@
X rm -rf $<
X
X and making a.out then works as expected.
X
X The same thing happens for any target of the form
X lib((entry)). These targets have an additional feature in
X that the entry target has the .SYMBOL attribute set automat-
X ically.
X
X NOTE: If the notion of entry points is supported by the
X archive and by dmake (currently not the case) then dmake
X will search the archive for the entry point and return not
X only the modification time of the member which defines the
X entry but also the name of the member file. This name will
X
X
X
XVersion 3.50 UW 38
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X then replace entry and will be used for making the member
X file. Once bound to an archive member the .SYMBOL attribute
X is removed from the target. This feature is presently dis-
X abled as there is little standardization among archive for-
X mats, and we have yet to find a makefile utilizing this
X feature (possibly due to the fact that it is unimplemented
X in most versions of UNIX Make).
X
XMULTI PROCESSING
X If the architecture supports it then dmake is capable of
X making a target's prerequisites in parallel. dmake will
X make as much in parallel as it can and use a number of child
X processes up to the maximum specified by MAXPROCESS or by
X the value supplied to the -P command line flag. A parallel
X make is enabled by setting the value of MAXPROCESS (either
X directly or via -P option) to a value which is > 1. dmake
X guarantees that all dependencies as specified in the
X makefile are honored. A target will not be made until all
X of its prerequisites have been made. If a parallel make is
X being performed then the following restrictions on parallel-
X ism are enforced.
X
X 1. Individual recipe lines in a non-group recipe are
X performed sequentially in the order in which they
X are specified within the makefile and in parallel
X with the recipes of other targets.
X
X 2. If a target contains multiple recipe definitions
X (cf. :: rules) then these are performed sequen-
X tially in the order in which the :: rules are
X specified within the makefile and in parallel with
X the recipes of other targets.
X
X 3. If a target rule contains the `!' modifier, then
X the recipe is performed sequentially for the list
X of outdated prerequisites and in parallel with the
X recipes of other targets.
X
X 4. If a target has the .SEQUENTIAL attribute set then
X all of its prerequisites are made sequentially
X relative to one another (as if MAXPROCESS=1), but
X in parallel with other targets in the makefile.
X
X Note: If you specify a parallel make then the order of tar-
X get update and the order in which the associated recipes are
X invoked will not correspond to that displayed by the -n
X flag.
X
XCONDITIONALS
X dmake supports a makefile construct called a conditional.
X It allows the user to conditionally select portions of
X makefile text for input processing and to discard other
X
X
X
XVersion 3.50 UW 39
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X portions. This becomes useful for writing makefiles that
X are intended to function for more than one target host and
X environment. The conditional expression is specified as
X follows:
X
X .IF expression
X ... if text ...
X .ELSE
X ... else text ...
X .END
X
X The .ELSE portion is optional, and the conditionals may be
X nested (ie. the text may contain another conditional).
X .IF, .ELSE, and .END may appear anywhere in the makefile,
X but a single conditional expression may not span multiple
X makefiles.
X
X expression can be one of the following three forms:
X
X <text> | <text> == <text> | <text> != <text>
X
X where text is either text or a macro expression. In any
X case, before the comparison is made, the expression is
X expanded. The text portions are then selected and compared.
X White space at the start and end of the text portion is dis-
X carded before the comparison. This means that a macro that
X evaluates to nothing but white space is considered a NULL
X value for the purpose of the comparison. In the first case
X the expression evaluates TRUE if the text is not NULL other-
X wise it evaluates FALSE. The remaining two cases both
X evaluate the expression on the basis of a string comparison.
X If a macro expression needs to be equated to a NULL string
X then compare it to the value of the macro $(NULL).
X
XEXAMPLES
X # A simple example showing how to use make
X #
X prgm : a.o b.o
X cc a.o b.o -o prgm
X a.o : a.c g.h
X cc a.c -o $@
X b.o : b.c g.h
X cc b.c -o $@
X
X In the previous example prgm is remade only if a.o and/or
X b.o is out of date with respect to prgm. These dependencies
X can be stated more concisely by using the inference rules
X defined in the standard startup file. The default rule for
X making .o's from .c's looks something like this:
X
X %.o : %.c; cc -c $(CFLAGS) -o $@ $<
X
X
X
X
XVersion 3.50 UW 40
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X Since there exists a rule (defined in the startup file) for
X making .o's from .c's dmake will use that rule for manufac-
X turing a .o from a .c and we can specify our dependencies
X more concisely.
X
X prgm : a.o b.o
X cc -o prgm $<
X a.o b.o : g.h
X
X A more general way to say the above using the new macro
X expansions would be:
X
X SRC = a b
X OBJ = {$(SRC)}.o
X
X prgm : $(OBJ)
X cc -o $@ $<
X
X $(OBJ) : g.h
X
X If we want to keep the objects in a separate directory,
X called objdir, then we would write something like this.
X
X SRC = a b
X OBJ = {$(SRC)}.o
X
X prgm : $(OBJ)
X cc $< -o $@
X
X $(OBJ) : g.h
X %.o : %.c
X $(CC) -c $(CFLAGS) -o $(@:f) $<
X mv $(@:f) objdir
X
X .SOURCE.o : objdir # tell make to look here for .o's
X
X An example of building library members would go something
X like this: (NOTE: The same rules as above will be used to
X produce .o's from .c's)
X
X SRC = a b
X LIB = lib
X LIBm = { $(SRC) }.o
X
X prgm: $(LIB)
X cc -o $@ $(LIB)
X
X $(LIB) .LIBRARY : $(LIBm)
X ar rv $@ $<
X rm $<
X
X Finally, suppose that each of the source files in the
X
X
X
XVersion 3.50 UW 41
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X previous example had the `:' character in their target name.
X Then we would write the above example as:
X
X SRC = f:a f:b
X LIB = lib
X LIBm = "{ $(SRC) }.o" # put quotes around each token
X
X prgm: $(LIB)
X cc -o $@ $(LIB)
X
X $(LIB) .LIBRARY : $(LIBm)
X ar rv $@ $<
X rm $<
X
XCOMPATIBILITY
X There are two notable differences between dmake and the
X standard version of BSD UNIX 4.2/4.3 Make.
X
X 1. BSD UNIX 4.2/4.3 Make supports wild card filename
X expansion for prerequisite names. Thus if a direc-
X tory contains a.h, b.h and c.h, then a line like
X
X target: *.h
X
X will cause UNIX make to expand the *.h into "a.h b.h
X c.h". dmake does not support this type of filename
X expansion.
X
X 2. Unlike UNIX make, touching a library member causes
X dmake to search the library for the member name and
X to update the library time stamp. This is only
X implemented in the UNIX version. MSDOS and other
X versions may not have librarians that keep file time
X stamps, as a result dmake touches the library file
X itself, and prints a warning.
X
X dmake is not compatible with GNU Make. In particular it
X does not understand GNU Make's macro expansions that query
X the file system.
X
X dmake is fully compatible with SYSV AUGMAKE, and supports
X the following AUGMAKE features:
X
X 1. The word include appearing at the start of a line
X can be used instead of the ".INCLUDE :" construct
X understood by dmake.
X
X 2. The macro modifier expression $(macro:str=sub) is
X understood and is equivalent to the expression
X $(macro:s/str/sub), with the restriction that str
X must match the following regular expression:
X
X
X
X
XVersion 3.50 UW 42
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
X str[ |\t][ |\t]*
X
X (ie. str only matches at the end of a token where
X str is a suffix and is terminated by a space, a tab,
X or end of line)
X
X 3. The macro % is defined to be $@ (ie. $% expands to
X the same value as $@).
X
X 4. The AUGMAKE notion of libraries is handled
X correctly.
X
X 5. When defining special targets for the inference
X rules and the AUGMAKE special target mapping is
X enabled then the special target .X is equivalent to
X the %-rule "% : %.X".
X
XLIMITS
X In some environments the length of an argument string is
X restricted. (e.g. MSDOS command line arguments cannot be
X longer than 128 bytes if you are using the standard
X command.com command interpreter as your shell, dmake text
X diversions may help in these situations.)
X
XPORTABILITY
X To write makefiles that can be moved from one environment to
X another requires some forethought. In particular you must
X define as macros all those things that may be different in
X the new environment. dmake has two facilities that help to
X support writing portable makefiles, recursive macros and
X conditional expressions. The recursive macros, allow one to
X define environment configurations that allow different
X environments for similar types of operating systems. For
X example the same make script can be used for SYSV and BSD
X but with different macro definitions.
X
X To write a makefile that is portable between UNIX and MSDOS
X requires both features since in almost all cases you will
X need to define new recipes for making targets. The recipes
X will probably be quite different since the capabilities of
X the tools on each machine are different. Different macros
X will be needed to help handle the smaller differences in the
X two environments.
X
X NOTE: Unlike UNIX, MSDOS does maintain cd requests cross
X single recipe lines. This is not portable, and your
X makefiles will not work the same way if you depend on it.
X Use the .IF ... .ELSE ... .END conditionals to supply dif-
X ferent make scripts as necessary.
X
X
X
X
X
X
XVersion 3.50 UW 43
X
X
X
X
XDMAKE(p) Unsupported Software DMAKE(p)
X
X
X
XFILES
X Makefile, makefile, startup.mk (use dmake -V to tell you
X where the startup file is)
X
XSEE ALSO
X sh(1), csh(1), touch(1), f77(1), pc(1), cc(1)
X S.I. Feldman Make - A Program for Maintaining Computer Pro-
X grams
X
XAUTHOR
X Dennis Vadura, CS Dept. University of Waterloo.
X dvadura at watdragon.uwaterloo.ca
X Many thanks to Carl Seger for his helpful suggestions, and
X to Trevor John Thompson for his many excellent ideas and
X informative bug reports.
X
XBUGS
X Some system commands return non-zero status inappropriately.
X Use -i (`-' within the makefile) to overcome the difficulty.
X
X Some systems do not have easily accessible time stamps for
X library members (MSDOS, AMIGA, etc) for these dmake uses the
X time stamp of the library instead and prints a warning the
X first time it does so. This is almost always ok, except
X when multiple makefiles update a single library file. In
X these instances it is possible to miss an update if one is
X not careful.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XVersion 3.50 UW 44
SHAR_EOF
echo "File man/dmake.nc is complete"
chmod 0640 man/dmake.nc || echo "restore of man/dmake.nc fails"
echo "x - extracting makefile (Text)"
sed 's/^X//' << 'SHAR_EOF' > makefile &&
X# Default makefile for the various versions of dmake that we
X# have available. This is a bootstrap version and uses /bin/sh to
X# execute a script which compiles dmake.
X#
X# Note the DOS commands actually invoke command.com to run the .bat file
X# to make the script.
X
Xall:
X @echo "You must issue one of:"
X @echo " make bsd43 - Generic BSD 4.3"
X @echo " make bsd43uw - Generic BSD 4.3 at U of Waterloo"
X @echo " make bsd43vf - Generic BSD 4.3 that needs vfprintf"
X @echo " make sysvr3 - Generic SysV R3 UNIX"
X @echo " make sysvr1 - Generic SysV R1 UNIX"
X @echo " make 386ix - 386/ix (SysV R3) [NOTE: not tested]"
X @echo " make dynix - Sequent DYNIX system"
X @echo " make ultrix - Ultrix 3.0 system"
X @echo " make mips - Any MIPS box"
X @echo " make tcc - DOS with tcc 2.0"
X @echo " make tccswp - swapping DOS version with tcc 2.0"
X @echo " make msc - DOS with MSC 4.0 to 5.1"
X @echo " make msc60 - DOS with MSC 6.0"
X @echo " make mscswp - swapping DOS version with MSC 4.0 to 5.1"
X @echo " make msc60swp - swapping DOS version with MSC 6.0"
X
Xbsd43uw :; /bin/sh -x < unix/bsd43/uw/make.sh
Xbsd43vf dynix mips :; /bin/sh -x < unix/bsd43/vf/make.sh
Xsysvr1 sysvr3 bsd43 386ix :; /bin/sh -x < unix/$@/make.sh
Xultrix : sysvr3;
X
X# DOS with some form of make and sh
X# Note if you do not have a 'make and/or sh' program under MSDOS then
X# typing 'make' in the dmake distribution directory will invoke the make.bat
X# batch file which will issue the appropriate instructions.
Xtcc tccswp msc msc60 mscswp msc60swp:; make.bat $@
SHAR_EOF
chmod 0440 makefile || echo "restore of makefile fails"
echo "x - extracting makefile.mk (Text)"
sed 's/^X//' << 'SHAR_EOF' > makefile.mk &&
X# //// Makefile for DMAKE. \\\\
X# The target system is characterized by the following macros imported from
X# the environment.
X#
X# OS - gives the class of operating system
X# OSRELEASE - optionally gives the particular release of the OS above.
X# OSENVIRONMENT - optionally gives the environment under which the above
X# OS is in use.
X#
X# Valid values for the above macros are:
X#
X# OS - unix, msdos
X# OSRELEASE - bsd43, sysvr3, 386ix
X# - tccdos, mscdos (valid only of OS == msdos)
X# OSENVIRONMENT - uw {valid for unix, bsd43 configuration only.}
X# vf (valid for unix, bsd43 configuration only.)
X#
X# See the config.mk file in the relevant subdirectories for additional
X# comments describing when a setting is applicable.
X
X# First target in the makefile, do this so that targets declared in the
X# included files are never marked as being the first *default* target.
Xfirst : all ;
X
X# Pull in the configuration macros, from the environment. OS is required,
X# OSRELEASE, and OSENVIRONMENT are optional.
X.IF $(OS) == $(NULL)
X .IMPORT : OS
X.END
X.IMPORT .IGNORE : OSRELEASE OSENVIRONMENT TMPDIR
X
X# Define the source files
XSRC =\
X infer.c make.c stat.c expand.c string.c hash.c dag.c dmake.c\
X path.c imacs.c sysintf.c parse.c getinp.c quit.c\
X basename.c dump.c macparse.c rulparse.c percent.c function.c
X
X# Common Include files.
XHDR = dmake.h extern.h struct.h vextern.h patchlvl.h version.h
X
X# Define the TARGET we are making, and where the OBJECT files go.
XOBJDIR := objects
XTARGET = dmake$E
XCFLAGS += -DHELP -I. -Icommon
X
X# Pull in the proper configuration file, based on the value of OS.
X.INCLUDE : $(OS)/config.mk
X
X# Set the .SOURCE targets so that we look for things in the right place.
X.SOURCE.c :^ .NULL
X.SOURCE.h :^ .NULL
X.SOURCE$O :^ $(OBJDIR)
X.PRECIOUS : $(HDR)
X
X# Must come after the above INCLUDE so that it gets ALL objects.
XOBJECTS := {$(ASRC:b) $(SRC:b)}$O
X
X# The main target, make sure the objects directory exists first.
X# LDARGS is defined in config.mk file of each OS/OSRELEASE combination.
Xall : $(TARGET);
X$(TARGET) : $(OBJDIR)
X$(TARGET) : $(OBJECTS);$(LD) $(LDARGS)
X
X# Other obvious targets...
X$(OBJDIR):;+-mkdir $@
X
X# Meta rule for making .o's from .c's (give our own so we can move object
X# to objects directory in a portable, compiler independent way)
X%$O : %.c
X %$(CC) -c $(CFLAGS) $<
X mv $(@:f) $(OBJDIR)
X
X# remaining dependencies should be automatically generated
Xsysintf$O : $(OS)/sysintf.h
X$(OBJECTS) : $(HDR)
X.SOURCE.h : common
X
X# Define the macros for printing the source, and pull in the
X# makefile portion.
XPRINTEXCLUDE = $(OBJDIR) $(OBJDIR).dbg test RCS control man common
X.INCLUDE : common/print.mk
X
Xclean:;+ $(RM) -rf dmake$E dbdmake$E objects*
X
X# Rules for making the manual pages.
Xman .SETDIR=man : dmake.nc ;
Xdmake.nc : dmake.p ; scriptfix < $< > $@
Xdmake.p : dmake.tf; typeset -man -Tdumb $< > $@
X
X#--------------------------------------------------------------------------
X# Make the various archives for shipping the thing around.
X#
Xarchives : zoo tar shar;
Xzoo : dmake.zoo ;
Xshar : dmake.shar;
Xtar : dmake.tar;
Xunzoo : dmake.zoo ; zoo xO// dmake.zoo
Xdmake.zoo .SILENT: src-list
X[
X echo "" >> $<
X echo -n '$@ : $$(ALLSRC);@ zoo aI $$@ < ' >> $<
X echo -n '<' >> $<
X echo -n '+' >> $<
X echo -n '$$(ALLSRC:t"\n")\n' >> $<
X echo -n '+' >> $<
X echo '>' >> $<
X $(MAKECMD) -f $< $@
X $(RM) -f $<
X]
X
Xdmake.shar .SILENT : src-list-shar
X[
X echo '$@:$$(ALLSRC) ;xshar -vc -o$@ -l40 $$(ALLSRC)' >> $<
X $(MAKECMD) -f $< $@
X $(RM) -f $<
X]
X
Xdmake.tar : src-list
X[
X echo '$@ .SILENT :$$(ALLSRC) ;tar -cf $@ $$(ALLSRC)' >> $<
X $(MAKECMD) -f $< $@
X mkdir dmake
X cd dmake
X tar xf ../$@; chmod -R u+rw .
X cd ..
X tar cf $@ dmake
X $(RM) -rf $< dmake
X]
X
Xsrc-list .SILENT: clean man
X echo 'ALLSRC = \' >$@
X find . -type f -print |\
X sed -e 's/RCS\///' -e 's/,v//' -e 's/$$/\\/' -e 's/^\.\// /'|\
X sort -u |\
X grep -v tst | grep -v $@ | grep -v LICENSE |\
X grep -v '\.zoo' | grep -v '\.tar'| grep -v '\.shar' >> $@
X echo ' LICENSE' >> $@
X
Xsrc-list-shar .SILENT: clean man
X echo 'ALLSRC = \' >$@
X find . -print |\
X sed -e 's/RCS\///' -e 's/,v//' -e 's/$$/\\/' -e 's/^\.\// /'|\
X sort -ur |\
X grep -v tst | grep -v $@ | grep -v LICENSE | grep -v RCS |\
X grep -v '^\.\\$$' | grep -v '\.zoo' | grep -v '\.tar'|\
X grep -v '\.shar' >> $@
X echo ' LICENSE' >> $@
X
X
X#--------------------------------------------------------------------------
X# This section can be used to make the necessary script files so that dmake
X# can be bootstrapped.
X#
X# dmake scripts -- makes all the script files at once.
X#
XSH = $(@:s/swp-/-/:s,-,/,:s/scripts/${SCRIPTFILE}/:s/c60d/cd/)
XMS = MAKESTARTUP=$(@:s/swp-/-/:s,-,/,:s/scripts/startup.mk/:s/c60d/cd/)
X
Xscripts: unix-scripts msdos-scripts
X
X# To add a new environment for UNIX, simply create the appropriate entry
X# in the style below for the macro which contains the OS, OSRELEASE and
X# OSENVIRONMENT flags. Then add the entry as a recipe line for the target
X# unix-scripts.
X#
Xunix-bsd43-scripts-flags = OS=unix OSRELEASE=bsd43 OSENVIRONMENT=
Xunix-sysvr3-scripts-flags = OS=unix OSRELEASE=sysvr3 OSENVIRONMENT=
Xunix-sysvr1-scripts-flags = OS=unix OSRELEASE=sysvr1 OSENVIRONMENT=
Xunix-386ix-scripts-flags = OS=unix OSRELEASE=386ix OSENVIRONMENT=
Xunix-bsd43-uw-scripts-flags= OS=unix OSRELEASE=bsd43 OSENVIRONMENT=uw
Xunix-bsd43-vf-scripts-flags= OS=unix OSRELEASE=bsd43 OSENVIRONMENT=vf
X
Xunix-scripts: clean
X $(MAKE) SCRIPTFILE=make.sh unix-bsd43-scripts
X $(MAKE) SCRIPTFILE=make.sh unix-bsd43-uw-scripts
X $(MAKE) SCRIPTFILE=make.sh unix-bsd43-vf-scripts
X $(MAKE) SCRIPTFILE=make.sh unix-sysvr3-scripts
X $(MAKE) SCRIPTFILE=make.sh unix-sysvr1-scripts
X $(MAKE) SCRIPTFILE=make.sh unix-386ix-scripts
X
Xunix-%-scripts:; $(MAKECMD) -ns $(MS) $($@-flags) >$(SH)
X
X# We make the standard dos scripts here, but we have to go and fix up the
X# make.bat file since it contains names of temporary files for the response
X# files required by the linker. We need to also construct the response file
X# contents. These two functions are performed by the fix-msdos-%-scripts
X# meta-target.
X#
X# To add a new DOS environment just do what is described for adding a new
X# unix environment, and then make certain that the fix-msdos-%-scripts target
X# performs the correct function for the new environment.
Xmsdos-cf = OS=msdos OSENVIRONMENT=
Xmsdos-tccdos-scripts-flags = $(msdos-cf) OSRELEASE=tccdos NOSWAP=y
Xmsdos-tccdosswp-scripts-flags = $(msdos-cf) OSRELEASE=tccdos
Xmsdos-mscdos-scripts-flags = $(msdos-cf) OSRELEASE=mscdos NOSWAP=y
Xmsdos-msc60dos-scripts-flags= $(msdos-cf) OSRELEASE=mscdos NOSWAP=y MSC_VER=6.0
Xmsdos-mscdosswp-scripts-flags = $(msdos-cf) OSRELEASE=mscdos
Xmsdos-msc60dosswp-scripts-flags = $(msdos-cf) OSRELEASE=mscdos MSC_VER=6.0
X
Xmsdos-scripts: clean
X $(MAKE) SCRIPTFILE=mk.bat msdos-tccdos-scripts
X $(MAKE) SCRIPTFILE=mkswp.bat msdos-tccdosswp-scripts
X $(MAKE) SCRIPTFILE=mk.bat msdos-mscdos-scripts
X $(MAKE) SCRIPTFILE=mk60.bat msdos-msc60dos-scripts
X $(MAKE) SCRIPTFILE=mkswp.bat msdos-mscdosswp-scripts
X $(MAKE) SCRIPTFILE=mk60swp.bat msdos-msc60dosswp-scripts
X
Xmsdos-%-scripts:
X $(MAKE) -nus $(MS) $($@-flags) >$(SH)
X $(MAKE) -s $(MAKEMACROS) $(MS) $($@-flags) fix-msdos-$*-scripts
X
XMAPOBJ = $(*:s/tccdos/obj/:s/mscdos/obj/:s/msc60dos/obj60/).rsp
XMAPLIB = $(*:s/tccdos/lib/:s/mscdos/lib/:s/msc60dos/lib60/).rsp
XOBJRSP = $(SH:s,fix/,,:s,${SCRIPTFILE},${MAPOBJ},)
XLIBRSP = $(SH:s,fix/,,:s,${SCRIPTFILE},${MAPLIB},)
XDOSOBJ = $(CSTARTUP) $(OBJDIR)/{$(OBJECTS)}
Xfix-msdos-%-scripts:
X sed -e 's,/tmp/mkA..[0-9]*,$(OBJRSP),'\
X -e 's,/tmp/mkB..[0-9]*,$(LIBRSP),'\
X -e 's,/,\\,g' <$(SH:s,fix/,,) >tmp-out
X mv -f tmp-out $(SH:s,fix/,,)
X mv <+$(DOSOBJ:s,/,\\,:t"+\n")\n+> $(OBJRSP)
X mv <+$(LDLIBS:s,/,\\,:t"+\n")\n+> $(LIBRSP)
SHAR_EOF
chmod 0640 makefile.mk || echo "restore of makefile.mk fails"
echo "x - extracting make.c (Text)"
sed 's/^X//' << 'SHAR_EOF' > make.c &&
X/* RCS -- $Header: /u2/dvadura/src/generic/dmake/src/RCS/make.c,v 1.1 90/10/06 12:03:59 dvadura Exp $
X-- SYNOPSIS -- perform the update of all outdated targets.
X--
X-- DESCRIPTION
X-- This is where we traverse the make graph looking for targets that
X-- are out of date, and we try to infer how to make them if we can.
X-- The usual make macros are understood, as well as some new ones:
X--
X-- $$ - expands to $
X-- $@ - full target name
X-- $* - target name with no suffix, same as $(@:db)
X-- or, the value of % in % meta rule recipes
X-- $? - list of out of date prerequisites
X-- $< - all prerequisites associated with rules line
X-- $& - all prerequisites associated with target
X-- $> - library name for target (if any)
X-- $^ - out of date prerequisites taken from value of $<
X-- {{ - expands to {
X-- }} - expands to }
X-- \# - expands to #
X--
X-- AUTHOR
X-- Dennis Vadura, dvadura at watdragon.uwaterloo.ca
X-- CS DEPT, University of Waterloo, Waterloo, Ont., Canada
X--
X-- COPYRIGHT
X-- Copyright (c) 1990 by Dennis Vadura. All rights reserved.
X--
X-- This program is free software; you can redistribute it and/or
X-- modify it under the terms of the GNU General Public License
X-- (version 1), as published by the Free Software Foundation, and
X-- found in the file 'LICENSE' included with this distribution.
X--
X-- This program is distributed in the hope that it will be useful,
X-- but WITHOUT ANY WARRANTY; without even the implied warrant of
X-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
X-- GNU General Public License for more details.
X--
X-- You should have received a copy of the GNU General Public License
X-- along with this program; if not, write to the Free Software
X-- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
X--
X-- LOG
X-- $Log: make.c,v $
X * Revision 1.1 90/10/06 12:03:59 dvadura
X * dmake Release, Version 3.6
X *
X*/
X
X#include "extern.h"
X#include "alloc.h"
X#include "db.h"
X
Xstatic int _exec_commands ANSI((CELLPTR, HOWPTR));
Xstatic void _drop_mac ANSI((HASHPTR));
Xstatic void _print_cmnd ANSI((char*, int, int));
Xstatic void _set_recipe ANSI((char*, int));
Xstatic void _set_tmd ANSI(());
Xstatic void _append_file ANSI((STRINGPTR, FILE*, char*, int));
X
X#define RP_GPPROLOG 0
X#define RP_RECIPE 1
X#define RP_GPEPILOG 2
X#define NUM_RECIPES 3
X
Xstatic STRINGPTR _recipes[ NUM_RECIPES ];
Xstatic CELLPTR Root; /* root cell for make graph */
X
X
X
Xint
XMake_targets()/*
X================
X Actually go and make the targets on the target list */
X{
X LINKPTR lp;
X int done = 0;
X
X DB_ENTER( "Make_targets" );
X
X /* Make sure the graph gets blown up for .SETDIR targets.
X * Only required for architectures that support parallel
X * makes. */
SHAR_EOF
echo "End of part 18"
echo "File make.c is continued in part 19"
echo "19" > s2_seq_.tmp
exit 0
More information about the Comp.sources.misc
mailing list