v20i078: dmake - dmake version 3.7, Patch02c/12
Dennis Vadura
dvadura at watdragon.waterloo.edu
Sun Jun 30 08:25:27 AEST 1991
Submitted-by: Dennis Vadura <dvadura at watdragon.waterloo.edu>
Posting-number: Volume 20, Issue 78
Archive-name: dmake/patch02c
Patch-To: dmake: Volume 19, Issue 22-58
#!/bin/sh
# this is dp2.02 (part 2 of a multipart archive)
# do not concatenate these parts, unpack them in order with /bin/sh
# file dm37p2 continued
#
if test ! -r _shar_seq_.tmp; then
echo 'Please unpack part 1 first!'
exit 1
fi
(read Scheck
if test "$Scheck" != 2; then
echo Please unpack part "$Scheck" next!
exit 1
else
exit 0
fi
) < _shar_seq_.tmp || exit 1
if test ! -f _shar_wnt_.tmp; then
echo 'x - still skipping dm37p2'
else
echo 'x - continuing file dm37p2'
sed 's/^X//' << 'SHAR_EOF' >> 'dm37p2' &&
XX attribute string must be quoted using ". If a
XX target having this attribute set also has the
XX .IGNORE attribute set then if the change to the
XX specified directory fails it will be ignored,
XX and no error message will be issued.
XX
XX ..SSIILLEENNTT Do not echo the recipe lines when making any
XX target with this attribute set, and do not issue
XX any warnings.
XX
XX ..SSWWAAPP Under MSDOS when making a target with this
XX attribute set swap the ddmmaakkee executable to disk
XX prior to executing the recipe line. Also see
XX the '%' recipe line flag defined in the RECIPES
XX section.
XX
XX ..SSYYMMBBOOLL Target is a library member and is an entry point
XX into a module in the library. This attribute is
XX used only when searching a library for a target.
XX Targets of the form lib((entry)) have this
XX attribute set automatically.
XX
XX ..UUSSEESSHHEELLLL Force each recipe line of a target to be exe-
XX cuted using a shell. Specifying this attribute
XX is equivalent to specifying the '+' character at
XX the start of each line of a non-group recipe.
XX
XX ..UUPPDDAATTEEAALLLL Indicates that all the targets listed in this
XX rule are updated by the execution of the accom-
XX panying recipe. A common example is the produc-
XX tion of the _y_._t_a_b_._c and _y_._t_a_b_._h files by yyaacccc
XX when it is run on a grammar. Specifying
XX .UPDATEALL in such a rule prevents the running
XX of yacc twice, once for the y.tab.c file and
XX once for the y.tab.h file.
XX
XX
XX All attributes are user setable and except for .UPDATEALL,
XX .SETDIR and .MKSARGS may be used in one of two forms. The
XX .MKSARGS attribute is restricted to use as a global attri-
XX bute, and the use of the .UPDATEALL and .SETDIR attributes
XX is restricted to rules of the second form only.
XX
XX ATTRIBUTE_LIST : _t_a_r_g_e_t_s
XX
XX assigns the attributes specified by ATTRIBUTE_LIST to each
XX target in _t_a_r_g_e_t_s or
XX
XX
XX
XVersion 3.70 UW 11
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX _t_a_r_g_e_t_s ATTRIBUTE_LIST : ...
XX
XX assigns the attributes specified by ATTRIBUTE_LIST to each
XX target in _t_a_r_g_e_t_s_. In the first form if _t_a_r_g_e_t_s is empty
XX (ie. a NULL list), then the list of attributes will apply to
XX all targets in the makefile (this is equivalent to the com-
XX mon Make construct of _"_._I_G_N_O_R_E _:_" but has been modified to
XX the notion of an attribute instead of a special target).
XX Not all of the attributes have global meaning. In particu-
XX lar, .LIBRARY, .SYMBOL, and .UPDATEALL have no assigned glo-
XX bal meaning.
XX
XX Any attribute may be used with any target, even with the
XX special targets. Some combinations are useless (e.g.
XX .INCLUDE .PRECIOUS: ... ), while others are useful (e.g.
XX .INCLUDE .IGNORE : "file.mk" will not complain if file.mk
XX cannot be found using the include file search rules, see the
XX section on SPECIAL TARGETS for a description of .INCLUDE).
XX If a specified attribute will not be used with the special
XX target a warning is issued and the attribute is ignored.
XX
XMMAACCRROOSS
XX ddmmaakkee supports six types of macro assignment.
XX
XX
XX MMAACCRROO == LLIINNEE This is the most common and familiar form of
XX macro assignment. It assigns LINE literally
XX as the value of MACRO. Future expansions of
XX MACRO recursively expand its value.
XX
XX MMAACCRROO **== LLIINNEE This form behaves exactly as the simple '='
XX form with the exception that if MACRO
XX already has a value then the assignment is
XX not performed.
XX
XX MMAACCRROO ::== LLIINNEE This form differs from the simple '=' form
XX in that it expands LINE prior to assigning
XX it as the value of MACRO. Future expansions
XX of MACRO do not recursively expand its
XX value.
XX
XX MMAACCRROO **::== LLIINNEE This form behaves exactly as the ':=' form
XX with the exception that if MACRO already has
XX a value then the assignment and expansion
XX are not performed.
XX
XX MMAACCRROO ++== LLIINNEE This form of macro assignment allows macro
XX values to grow. It takes the literal value
XX of LINE and appends it to the previous value
XX of MACRO separating the two by a single
XX space. Future expansions of MACRO recur-
XX sively expand its value.
XX
XX
XX
XVersion 3.70 UW 12
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX MMAACCRROO ++::== LLIINNEE This form is similar to the '+=' form except
XX that the value of LINE is expanded prior to
XX being added to the value of MACRO.
XX
XX Macro expressions specified on the command line allow the
XX macro value to be redefined within the makefile only if the
XX macro is defined using the '+=' and '+:=' operators. Other
XX operators will define a macro that cannot be further modi-
XX fied.
XX
XX When ddmmaakkee defines a non-environment macro it strips leading
XX and trailing white space from the macro value. Macros
XX imported from the environment via either the .IMPORT special
XX target (see the SPECIAL TARGETS section), or the --ee, or --EE
XX flags are an exception to this rule. Their values are
XX always taken literally and white space is never stripped.
XX In addition, named macros defined using the .IMPORT special
XX target do not have their values expanded when they are used
XX within a makefile. In contrast, environment macros that are
XX imported due to the specification of the --ee or --EE flags are
XX subject to expansion when used.
XX
XX To specify a macro expansion enclose the name in () or {}
XX and precede it with a dollar sign $. Thus $(TEST)
XX represents an expansion of the macro variable named TEST.
XX If TEST is defined then $(TEST) is replaced by its expanded
XX value. If TEST is not defined then $(TEST) expands to the
XX NULL string (this is equivalent to defining a macro as
XX 'TEST=' ). A short form may be used for single character
XX named macros. In this case the parentheses are optional,
XX and $(I) is equivalent to $I. Macro expansion is recursive,
XX hence, if the value string contains an expression represent-
XX ing a macro expansion, the expansion is performed. Circular
XX macro expansions are detected and cause an error to be
XX issued.
XX
XX When defining a macro the given macro name is first expanded
XX before being used to define the macro. Thus it is possible
XX to define macros whose names depend on values of other mac-
XX ros. For example, suppose CWD is defined as
XX
XX CWD = $(PWD:b)
XX
XX then the value of $(CWD) is the name of the current direc-
XX tory. This can be used to define macros specific to this
XX directory, for example:
XX
XX _$(CWD).prt = list of files to print...
XX
XX The actual name of the defined macro is a function of the
XX current directory. A construct such as this is useful when
XX processing a hierarchy of directories using .SETDIR
XX
XX
XX
XVersion 3.70 UW 13
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX attributed targets and a collection of small distributed
XX makefile stubs.
XX
XX Macro variables may be defined within the makefile, on the
XX command line, or imported from the environment.
XX
XX ddmmaakkee supports several non-standard macro expansions: The
XX first is of the form:
XX
XX _$_(_m_a_c_r_o___n_a_m_e_:_m_o_d_i_f_i_e_r___l_i_s_t_:_m_o_d_i_f_i_e_r___l_i_s_t_:_._._._)
XX
XX where _m_o_d_i_f_i_e_r___l_i_s_t is chosen from the set { D or d, F or f,
XX B or b, S or s, T or t } and
XX
XX d - directory portion of all path names
XX f - file (including suffix) portion of path names
XX b - file (not including suffix) portion of path names
XX s - simple pattern substitution
XX t - tokenization.
XX
XX Thus if we have the example:
XX
XX test = d1/d2/d3/a.out f.out d1/k.out
XX
XX The following macro expansions produce the values on the
XX right of '->' after expansion.
XX
XX $(test:d) -> d1/d2/d3/ d1/
XX $(test:b) -> a f k
XX $(test:f) -> a.out f.out k.out
XX ${test:db} -> d1/d2/d3/a f d1/k
XX ${test:s/out/in/:f} -> a.in f.in k.in
XX $(test:f:t"+") -> a.out+f.out+k.out
XX
XX If a token ends in a string composed from the value of the
XX macro DIRBRKSTR (ie. ends in a directory separator string,
XX e.g. '/' in UNIX) and you use the ::dd modifier then the
XX expansion returns the directory name less the final direc-
XX tory separator string. Thus successive pairs of :d modif-
XX iers each remove a level of directory in the token string.
XX
XX The tokenization modifier takes all white space separated
XX tokens from the macro value and separates them by the quoted
XX separator string. The separator string may contain the fol-
XX lowing escape codes \a => <bel>, \b => <backspace>, \f =>
XX <formfeed>, \n => <nl>, \r => <cr>, \t => <tab>, \v =>
XX <vertical tab>, \" => ", and \xxx => <xxx> where xxx is the
XX octal representation of a character. Thus the expansion:
XX
XX $(test:f:t"+\n")
XX produces:
XX a.out+
XX
XX
XX
XVersion 3.70 UW 14
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX f.out+
XX k.out
XX
XX The second non-standard form of macro expansion allows for
XX recursive macros. It is possible to specify a $(_m_a_c_r_o___n_a_m_e)
XX or ${_m_a_c_r_o___n_a_m_e} expansion where _m_a_c_r_o___n_a_m_e contains more $(
XX ... ) or ${ ... } macro expansions itself.
XX
XX For example $(CC$(_HOST)$(_COMPILER)) will first expand
XX CC$(_HOST)$(_COMPILER) to get a result and use that result
XX as the name of the macro to expand. This is useful for
XX writing a makefile for more than one target environment. As
XX an example consider the following hypothetical case. Suppose
XX that _HOST and _COMPILER are imported from the environment
XX and are set to represent the host machine type and the host
XX compiler respectively.
XX
XX CFLAGS_VAX_CC = -c -O # _HOST == "_VAX", _COMPILER == "_CC"
XX CFLAGS_PC_MSC = -c -ML # _HOST == "_PC", _COMPILER == "_MSC"
XX
XX # redefine CFLAGS macro as:
XX
XX CFLAGS := $(CFLAGS$(_HOST)$(_COMPILER))
XX
XX This causes CFLAGS to take on a value that corresponds to
XX the environment in which the make is being invoked.
XX
XX The final non-standard macro expansion is of the form:
XX
XX string1{token_list}string2
XX
XX where string1, string2 and token_list are expanded. After
XX expansion, string1 is prepended to each token found in
XX token_list and string2 is appended to each resulting token
XX from the previous prepend. string1 and string2 are not del-
XX imited by white space whereas the tokens in token_list are.
XX A null token in the token list is specified using "". Thus
XX using another example we have:
XX
XX test/{f1 f2}.o --> test/f1.o test/f2.o
XX test/ {f1 f2}.o --> test/ f1.o f2.o
XX test/{f1 f2} .o --> test/f1 test/f2 .o
XX test/{"f1" ""}.o --> test/f1.o test/.o
XX
XX and
XX
XX test/{d1 d2}/{f1 f2}.o --> test/d1/f1.o test/d1/f2.o
XX test/d2/f1.o test/d2/f2.o
XX
XX This last expansion is activated only when the first charac-
XX ters of _t_o_k_e_n___l_i_s_t appear immediately after the opening '{'
XX with no intervening white space. The reason for this
XX
XX
XX
XVersion 3.70 UW 15
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX restriction is the following incompatibility with Bourne
XX Shell recipes. The line
XX
XX { echo hello;}
XX
XX is valid /bin/sh syntax; while
XX
XX {echo hello;}
XX
XX is not. Hence the latter triggers the enhanced macro expan-
XX sion while the former causes it to be suppressed. See the
XX SPECIAL MACROS section for a description of the special mac-
XX ros that ddmmaakkee defines and understands.
XX
XRRUULLEESS AANNDD TTAARRGGEETTSS
XX A makefile contains a series of entries that specify depen-
XX dencies. Such entries are called _t_a_r_g_e_t_/_p_r_e_r_e_q_u_i_s_i_t_e or
XX _r_u_l_e definitions. Each rule definition is optionally fol-
XX lowed by a set of lines that provide a recipe for updating
XX any targets defined by the rule. Whenever ddmmaakkee attempts to
XX bring a target up to date and an explicit recipe is provided
XX with a rule defining the target, that recipe is used to
XX update the target. A rule definition begins with a line
XX having the following syntax:
XX
XX _<_t_a_r_g_e_t_s_> [_<_a_t_t_r_i_b_u_t_e_s_>] _<_r_u_l_e_o_p_> [_<_p_r_e_r_e_q_u_i_s_i_t_e_s_>] [;_<_r_e_c_i_p_e_>]
XX
XX _t_a_r_g_e_t_s is a non-empty list of targets. If the target is a
XX special target (see SPECIAL TARGETS section below) then it
XX must appear alone on the rule line. For example:
XX
XX .IMPORT .ERROR : ...
XX
XX is not allowed since both .IMPORT and .ERROR are special
XX targets. Special targets are not used in the construction
XX of the dependency graph and will not be made.
XX
XX _a_t_t_r_i_b_u_t_e_s is a possibly empty list of attributes. Any
XX attribute defined in the ATTRIBUTES section above may be
XX specified. All attributes will be applied to the list of
XX named targets in the rule definition. No other targets will
XX be affected.
XX
XX
XX NOTE: As stated earlier, if both the target list and
XX prerequisite list are empty but the attributes list
XX is not, then the specified attributes affect all
XX targets in the makefile.
XX
XX
XX _r_u_l_e_o_p is a separator which is used to identify the targets
XX from the prerequisites. Optionally it also provides a
XX
XX
XX
XVersion 3.70 UW 16
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX facility for modifying the way in which ddmmaakkee handles the
XX making of the associated targets. In its simplest form the
XX operator is a single ':', and need not be separated by white
XX space from its neighboring tokens. It may additionally be
XX followed by any of the modifiers { !, ^, -, : }, where:
XX
XX
XX !! says execute the recipe for the associated targets once
XX for each out of date prerequisite. Ordinarily the
XX recipe is executed once for all out of date prere-
XX quisites at the same time.
XX
XX ^^ says to insert the specified prerequisites, if any,
XX before any other prerequisites already associated with
XX the specified targets. In general, it is not useful to
XX specify ^ with an empty list of prerequisites.
XX
XX -- says to clear the previous list of prerequisites before
XX adding the new prerequisites. Thus,
XX
XX .SUFFIXES :
XX .SUFFIXES : .a .b
XX
XX can be replaced by
XX
XX .SUFFIXES :- .a .b
XX
XX however the old form still works as expected. NOTE:
XX .SUFFIXES is ignored by ddmmaakkee it is used here simply as
XX an example.
XX
XX :: When the rule operator is not modified by a second ':'
XX only one set of rules may be specified for making a
XX target. Multiple definitions may be used to add to the
XX list of prerequisites that a target depends on. How-
XX ever, if a target is multiply defined only one defini-
XX tion may specify a recipe for making the target.
XX
XX When a target's rule operator is modified by a second
XX ':' (:: for example) then this definition may not be
XX the only definition with a recipe for the target.
XX There may be other :: target definition lines that
XX specify a different set of prerequisites with a dif-
XX ferent recipe for updating the target. Any such target
XX is made if any of the definitions find it to be out of
XX date with respect to the related prerequisites and the
XX corresponding recipe is used to update the target.
XX
XX In the following simple example, each rule has a `::'
XX _r_u_l_e_o_p. In such an operator we call the first `:' the
XX operator, and the second `:' the modifier.
XX
XX
XX
XX
XVersion 3.70 UW 17
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX a.o :: a.c b.h
XX first recipe for making a.o
XX
XX a.o :: a.y b.h
XX second recipe for making a.o
XX
XX If a.o is found to be out of date with respect to a.c
XX then the first recipe is used to make a.o. If it is
XX found out of date with respect to a.y then the second
XX recipe is used. If a.o is out of date with respect to
XX b.h then both recipes are invoked to make a.o. In the
XX last case the order of invocation corresponds to the
XX order in which the rule definitions appear in the
XX makefile.
XX
XX Targets defined using a single `:' operator with a recipe
XX may be redefined again with a new recipe by using a `:'
XX operator with a `:' modifier. This is equivalent to a tar-
XX get having been initially defined with a rule using a `:'
XX modifier. Once a target is defined using a `:' modifier it
XX may not be defined again with a recipe using only the `:'
XX operator with no `:' modifier. In both cases the use of a
XX `:' modifier creates a new list of prerequisites and makes
XX it the current prerequisite list for the target. The `:'
XX operator with no recipe always modifies the current list of
XX prerequisites. Thus assuming each of the following defini-
XX tions has a recipe attached, then:
XX
XX joe : fred ... (1)
XX joe :: more ... (2)
XX
XX and
XX
XX joe :: fred ... (3)
XX joe :: more ... (4)
XX
XX are legal and mean: add the recipe associated with (2), or
XX (4) to the set of recipes for joe, placing them after exist-
XX ing recipes for making joe. The constructs:
XX
XX joe :: fred ... (5)
XX joe : more ... (6)
XX
XX and
XX
XX joe : fred ... (7)
XX joe : more ... (8)
XX
XX are errors since we have two sets of perfectly good recipes
XX for making the target.
XX
XX
XX
XX
XX
XVersion 3.70 UW 18
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX _p_r_e_r_e_q_u_i_s_i_t_e_s is a possibly empty list of targets that must
XX be brought up to date before making the current target.
XX
XX _r_e_c_i_p_e is a short form and allows the user to specify short
XX rule definitions on a single line. It is taken to be the
XX first recipe line in a larger recipe if additional lines
XX follow the rule definition. If the semi-colon is present
XX but the recipe line is empty (ie. null string) then it is
XX taken to be an empty rule. Any target so defined causes the
XX _D_o_n_'_t _k_n_o_w _h_o_w _t_o _m_a_k_e _._._. error message to be suppressed
XX when ddmmaakkee tries to make the target and fails. This silence
XX is maintained for rules that are terminated by a semicolon
XX and have no following recipe lines, for targets listed on
XX the command line, for the first target found in the
XX makefile, and for any target having no recipe but containing
XX a list of prerequisites (see the COMPATIBILITY section for
XX an exception to this rule if the AUGMAKE (--AA) flag was
XX specified.
XX
XRREECCIIPPEESS
XX The traditional format used by most versions of Make defines
XX the recipe lines as arbitrary strings that may contain macro
XX expansions. They follow a rule definition line and may be
XX spaced apart by comment or blank lines. The list of recipe
XX lines defining the recipe is terminated by a new target
XX definition, a macro definition, or end-of-file. Each recipe
XX line MMUUSSTT begin with a <<TTAABB>> character which may optionally
XX be followed with one or all of the characters _'_@_%_+_-_'. The
XX _'_-_' indicates that non-zero exit values (ie. errors) are to
XX be ignored when this recipe line is executed, the _'_+_' indi-
XX cates that the current recipe line is to be executed using
XX the shell, the _'_%_' indicates that ddmmaakkee should swap itself
XX out to secondary storage (MSDOS only) before running the
XX recipe and the _'_@_' indicates that the recipe line should NOT
XX be echoed to the terminal prior to being executed. Each
XX switch is off by default (ie. by default, errors are signi-
XX ficant, commands are echoed, no swapping is done and a shell
XX is used only if the recipe line contains a character found
XX in the value of the SHELLMETAS macro). Global settings
XX activated via command line options or special attribute or
XX target names may also affect these settings. An example
XX recipe:
XX
XX target :
XX first recipe line
XX second recipe line, executed independently of the first.
XX @a recipe line that is not echoed
XX -and one that has errors ignored
XX %and one that causes dmake to swap out
XX +and one that is executed using a shell.
XX
XX
XX
XX
XX
XVersion 3.70 UW 19
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX The second and new format of the recipe block begins the
XX block with the character '[' (the open group character) in
XX the last non-white space position of a line, and terminates
XX the block with the character ']' (the close group character)
XX in the first non-white space position of a line. In this
XX form each recipe line need not have a leading TAB. This is
XX called a recipe group. Groups so defined are fed intact as
XX a single unit to a shell for execution whenever the
XX corresponding target needs to be updated. If the open group
XX character '[' is preceded by one or all of -, @ or % then
XX they apply to the entire group in the same way that they
XX apply to single recipe lines. You may also specify '+' but
XX it is redundant as a shell is already being used to run the
XX recipe. See the MAKING TARGETS section for a description of
XX how ddmmaakkee invokes recipes. Here is an example of a group
XX recipe:
XX
XX target :
XX [
XX first recipe line
XX second recipe line
XX all of these recipe lines are fed to a
XX single copy of a shell for execution.
XX ]
XX
XX
XTTEEXXTT DDIIVVEERRSSIIOONNSS
XX ddmmaakkee supports the notion of text diversions. If a recipe
XX line contains the macro expression
XX
XX $(mktmp[,[_f_i_l_e][,_t_e_x_t]] _d_a_t_a)
XX
XX then all text contained in the _d_a_t_a expression is expanded
XX and is written to a temporary file. The return value of the
XX macro is the name of the temporary file.
XX
XX _d_a_t_a can be any text and must be separated from the 'mktmp'
XX portion of the macro name by white-space. The only restric-
XX tion on the data text is that it must contain a balanced
XX number of parentheses of the same kind as are used to ini-
XX tiate the $(mktmp ...) expression. For example:
XX
XX $(mktmp $(XXX))
XX
XX is legal and works as expected, but:
XX
XX $(mktmp text (to dump to file)
XX
XX is not legal. You can achieve what you wish by either
XX defining a macro that expands to '(' or by using {} in the
XX macro expression; like this:
XX
XX
XX
XX
XVersion 3.70 UW 20
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX ${mktmp text (to dump to file}
XX
XX Since the temporary file is opened when the macro containing
XX the text diversion expression is expanded, diversions may
XX now be nested and any diversions that are created as part of
XX ':=' macro expansions persist for the duration of the ddmmaakkee
XX run. The diversion text may contain the same escape codes
XX as those described in the MACROS section. Thus if the _d_a_t_a
XX text is to contain new lines they must be inserted using the
XX \n escape sequence. For example the expression:
XX
XX all:
XX cat $(mktmp this is a\n\
XX test of the text diversion\n)
XX
XX is replaced by:
XX
XX cat /tmp/mk12294AA
XX
XX where the temporary file contains two lines both of which
XX are terminated by a new-line. If the _d_a_t_a text spans multi-
XX ple lines in the makefile then each line must be continued
XX via the use of a \. A second more illustrative example gen-
XX erates a response file to an MSDOS link command:
XX
XX OBJ = fred.obj mary.obj joe.obj
XX all : $(OBJ)
XX link @$(mktmp $(^:t"+\n")\n)
XX
XX The result of making `all' in the second example is the com-
XX mand:
XX
XX link @/tmp/mk02394AA
XX
XX where the temporary file contains:
XX
XX fred.obj+
XX mary.obj+
XX joe.obj
XX
XX The last line of the file is terminated by a new-line which
XX is inserted due to the \n found at the end of the _d_a_t_a
XX string.
XX
XX If the optional _f_i_l_e specifier is present then its expanded
XX value is the name of the temporary file to create. Whenever
XX a $(mktmp ...) macro is expanded the macro $(TMPFILE) is set
XX to a new temporary file name. Thus the construct:
XX
XX $(mktmp,$(TMPFILE) data)
XX
XX is completely equivalent to not specifying the $(TMPFILE)
XX
XX
XX
XVersion 3.70 UW 21
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX optional argument. Another example that would be useful for
XX MSDOS users with a Turbo-C compiler
XX
XX $(mktmp,turboc.cfg $(CFLAGS))
XX
XX will place the contents of CFLAGS into a local _t_u_r_b_o_c_._c_f_g
XX file. The second optional argument, _t_e_x_t, if present alters
XX the name of the value returned by the $(mktmp ...) macro.
XX
XX Under MS-DOS text diversions may be a problem. Many DOS
XX tools require that path names which contain directories use
XX the \ character to delimit the directories. Some users how-
XX ever wish to use the '/' to delimit pathnames and use
XX environments that allow them to do so. The macro USESHELL
XX is set to "yes" if the current recipe is forced to use a
XX shell via the .USESHELL or '+' directives, otherwise its
XX value is "no". The ddmmaakkee startup files define the macro
XX DIVFILE whose value is either the value of TMPFILE or the
XX value of TMPFILE edited to replace any '/' characters to the
XX appropriate value based on the current shell and whether it
XX will be used to execute the recipe.
XX
XX Previous versions of ddmmaakkee defined text diversions using <+,
XX +> strings, where <+ started a text diversion and +> ter-
XX minated one. ddmmaakkee is backward compatible with this con-
XX struct if the <+ and +> appear literally on the same recipe
XX line or in the same macro value string. In such instances
XX the expression:
XX
XX <+data+>
XX
XX is mapped to:
XX
XX $(mktmp data)
XX
XX which is fully output compatible with the earlier construct.
XX <+, +> constructs whose text spans multiple lines must be
XX converted by hand to use $(mktmp ...).
XX
XX If the environment variable TMPDIR is defined then the tem-
XX porary file is placed into the directory specified by that
XX variable. A makefile can modify the location of temporary
XX files by defining a macro named TMPDIR and exporting it
XX using the .EXPORT special target.
XX
XSSPPEECCIIAALL TTAARRGGEETTSS
XX This section describes the special targets that are recog-
XX nized by ddmmaakkee. Some are affected by attributes and others
XX are not.
XX
XX ..EERRRROORR If defined then the recipe associated with
XX this target is executed whenever an error
XX
XX
XX
XVersion 3.70 UW 22
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX condition is detected by ddmmaakkee. All attri-
XX butes that can be used with any other target
XX may be used with this target. Any prere-
XX quisites of this target will be brought up to
XX date during its processing. NOTE: errors
XX will be ignored while making this target, in
XX extreme cases this may cause some problems.
XX
XX ..EEXXPPOORRTT All prerequisites associated with this target
XX are assumed to correspond to macro names and
XX they and their values are exported to the
XX environment as environment strings at the
XX point in the makefile at which this target
XX appears. Any attributes specified with this
XX target are ignored. Only macros which have
XX been assigned a value in the makefile prior to
XX the export directive are exported, macros as
XX yet undefined are not exported.
XX
XX ..IIMMPPOORRTT Prerequisite names specified for this target
XX are searched for in the environment and
XX defined as macros with their value taken from
XX the environment. If the special name ..EEVVEERRYY----
XX TTHHIINNGG is used as a prerequisite name then all
XX environment variables defined in the environ-
XX ment are imported. The functionality of the
XX --ee flag can be forced by placing the construct
XX _._I_M_P_O_R_T _: _._E_V_E_R_Y_T_H_I_N_G at the start of a
XX makefile. Similarly, by placing the construct
XX at the end, one can emulate the effect of the
XX --EE command line flag. If a prerequisite name
XX cannot be found in the environment an error
XX message is issued. .IMPORT accepts the
XX .IGNORE attribute. When given, it causes
XX ddmmaakkee to ignore the above error. See the MAC-
XX ROS section for a description of the process-
XX ing of imported macro values.
XX
XX ..IINNCCLLUUDDEE Parse another makefile just as if it had been
XX located at the point of the .INCLUDE in the
XX current makefile. The list of prerequisites
XX gives the list of makefiles to try to read.
XX If the list contains multiple makefiles then
XX they are read in order from left to right.
XX The following search rules are used when try-
XX ing to locate the file. If the filename is
XX surrounded by " or just by itself then it is
XX searched for in the current directory. If it
XX is not found it is then searched for in each
XX of the directories specified for the .INCLU-
XX DEDIRS special target. If the file name is
XX surrounded by < and >, (ie.
XX
XX
XX
XVersion 3.70 UW 23
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX <my_spiffy_new_makefile>) then it is searched
XX for only in the directories given by the
XX .INCLUDEDIRS special target. In both cases if
XX the file name is a fully qualified name start-
XX ing at the root of the file system then it is
XX only searched for once, and the .INCLUDEDIRS
XX list is ignored. .INCLUDE accepts the .IGNORE
XX and .SETDIR attributes. If .IGNORE attribute
XX is given and the file cannot be found then
XX ddmmaakkee continues processing, otherwise an error
XX message is generated. The .SETDIR attribute
XX causes ddmmaakkee to change directories to the
XX specified directory prior to attempting the
XX include operation.
XX
XX ..IINNCCLLUUDDEEDDIIRRSS The list of prerequisites specified for this
XX target defines the set of directories to
XX search when trying to include a makefile.
XX
XX ..KKEEEEPP__SSTTAATTEE This special target is a synonym for the macro
XX definition
XX
XX .KEEP_STATE := _state.mk
XX
XX It's effect is to turn on STATE keeping and to
XX define ___s_t_a_t_e_._m_k as the state file.
XX
XX ..MMAAKKEEFFIILLEESS The list of prerequisites is the set of files
XX to try to read as the default makefile. By
XX default this target is defined as:
XX
XX .MAKEFILES : makefile.mk Makefile
XX makefile
XX
XX
XX ..SSOOUURRCCEE The prerequisite list of this target defines a
XX set of directories to check when trying to
XX locate a target file name. See the section on
XX BINDING of targets for more information.
XX
XX ..SSOOUURRCCEE..ssuuffff The same as .SOURCE, except that the
XX .SOURCE.suff list is searched first when try-
XX ing to locate a file matching the a target
XX whose name ends in the suffix .suff.
XX
XX ..RREEMMOOVVEE The recipe of this target is used whenever
XX ddmmaakkee needs to remove intermediate targets
XX that were made but do not need to be kept
XX around. Such targets result from the applica-
XX tion of transitive closure on the dependency
XX graph.
XX
XX
XX
XX
XVersion 3.70 UW 24
XX
XX
XX
XX
XDMAKE(p) Unsupported Free Software DMAKE(p)
XX
XX
XX
XX In addition to the special targets above, several other
XX forms of targets are recognized and are considered special,
XX their exact form and use is defined in the sections that
XX follow.
XX
XSSPPEECCIIAALL MMAACCRROOSS
SHAR_EOF
true || echo 'restore of dm37p2 failed'
fi
echo 'End of part 2'
echo 'File dm37p2 is continued in part 3'
echo 3 > _shar_seq_.tmp
exit 0
exit 0 # Just in case...
--
Kent Landfield INTERNET: kent at sparky.IMD.Sterling.COM
Sterling Software, IMD UUCP: uunet!sparky!kent
Phone: (402) 291-8300 FAX: (402) 291-4362
Please send comp.sources.misc-related mail to kent at uunet.uu.net.
More information about the Comp.sources.misc
mailing list