v19i034: dmake - dmake version 3.7, Part13/37
Dennis Vadura
dvadura at watdragon.waterloo.edu
Sat May 11 04:59:59 AEST 1991
Submitted-by: Dennis Vadura <dvadura at watdragon.waterloo.edu>
Posting-number: Volume 19, Issue 34
Archive-name: dmake/part13
Supersedes: dmake-3.6: Volume 15, Issue 52-77
---- Cut Here and feed the following to sh ----
#!/bin/sh
# this is dmake.shar.13 (part 13 of a multipart archive)
# do not concatenate these parts, unpack them in order with /bin/sh
# file dmake/man/dmake.nc continued
#
if test ! -r _shar_seq_.tmp; then
echo 'Please unpack part 1 first!'
exit 1
fi
(read Scheck
if test "$Scheck" != 13; then
echo Please unpack part "$Scheck" next!
exit 1
else
exit 0
fi
) < _shar_seq_.tmp || exit 1
if test -f _shar_wnt_.tmp; then
sed 's/^X//' << 'SHAR_EOF' >> 'dmake/man/dmake.nc' &&
X once for the y.tab.h file.
X
X
X All attributes are user setable and except for .UPDATEALL,
X .SETDIR and .MKSARGS may be used in one of two forms. The
X .MKSARGS attribute is restricted to use as a global attri-
X bute, and the use of the .UPDATEALL and .SETDIR attributes
X is restricted to rules of the second form only.
X
X ATTRIBUTE_LIST : targets
X
X assigns the attributes specified by ATTRIBUTE_LIST to each
X target in targets or
X
X targets ATTRIBUTE_LIST : ...
X
X
X
Version 3.70 UW 11
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X assigns the attributes specified by ATTRIBUTE_LIST to each
X target in targets. In the first form if targets is empty
X (ie. a NULL list), then the list of attributes will apply to
X all targets in the makefile (this is equivalent to the com-
X mon Make construct of ".IGNORE :" but has been modified to
X the notion of an attribute instead of a special target).
X Not all of the attributes have global meaning. In particu-
X lar, .LIBRARY, .SYMBOL, and .UPDATEALL have no assigned glo-
X bal meaning.
X
X Any attribute may be used with any target, even with the
X special targets. Some combinations are useless (e.g.
X .INCLUDE .PRECIOUS: ... ), while others are useful (e.g.
X .INCLUDE .IGNORE : "file.mk" will not complain if file.mk
X cannot be found using the include file search rules, see the
X section on SPECIAL TARGETS for a description of .INCLUDE).
X If a specified attribute will not be used with the special
X target a warning is issued and the attribute is ignored.
X
MACROS
X dmake supports six types of macro assignment.
X
X
X MACRO = LINE This is the most common and familiar form of
X macro assignment. It assigns LINE literally
X as the value of MACRO. Future expansions of
X MACRO recursively expand its value.
X
X MACRO *= LINE This form behaves exactly as the simple '='
X form with the exception that if MACRO
X already has a value then the assignment is
X not performed.
X
X MACRO := LINE This form differs from the simple '=' form
X in that it expands LINE prior to assigning
X it as the value of MACRO. Future expansions
X of MACRO do not recursively expand its
X value.
X
X MACRO *:= LINE This form behaves exactly as the ':=' form
X with the exception that if MACRO already has
X a value then the assignment and expansion
X are not performed.
X
X MACRO += LINE This form of macro assignment allows macro
X values to grow. It takes the literal value
X of LINE and appends it to the previous value
X of MACRO separating the two by a single
X space. Future expansions of MACRO recur-
X sively expand its value.
X
X
X
X
X
Version 3.70 UW 12
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X MACRO +:= LINE This form is similar to the '+=' form except
X that the value of LINE is expanded prior to
X being added to the value of MACRO.
X
X Macro expressions specified on the command line allow the
X macro value to be redefined within the makefile only if the
X macro is defined using the '+=' and '+:=' operators. Other
X operators will define a macro that cannot be further modi-
X fied.
X
X When dmake defines a non-environment macro it strips leading
X and trailing white space from the macro value. Macros
X imported from the environment via either the .IMPORT special
X target (see the SPECIAL TARGETS section), or the -e, or -E
X flags are an exception to this rule. Their values are
X always taken literally and white space is never stripped.
X In addition, named macros defined using the .IMPORT special
X target do not have their values expanded when they are used
X within a makefile. In contrast, environment macros that are
X imported due to the specification of the -e or -E flags are
X subject to expansion when used.
X
X To specify a macro expansion enclose the name in () or {}
X and precede it with a dollar sign $. Thus $(TEST)
X represents an expansion of the macro variable named TEST.
X If TEST is defined then $(TEST) is replaced by its expanded
X value. If TEST is not defined then $(TEST) expands to the
X NULL string (this is equivalent to defining a macro as
X 'TEST=' ). A short form may be used for single character
X named macros. In this case the parentheses are optional,
X and $(I) is equivalent to $I. Macro expansion is recursive,
X hence, if the value string contains an expression represent-
X ing a macro expansion, the expansion is performed. Circular
X macro expansions are detected and cause an error to be
X issued.
X
X When defining a macro the given macro name is first expanded
X before being used to define the macro. Thus it is possible
X to define macros whose names depend on values of other mac-
X ros. For example, suppose CWD is defined as
X
X CWD = $(PWD:b)
X
X then the value of $(CWD) is the name of the current direc-
X tory. This can be used to define macros specific to this
X directory, for example:
X
X _$(CWD).prt = list of files to print...
X
X The actual name of the defined macro is a function of the
X current directory. A construct such as this is useful when
X processing a hierarchy of directories using .SETDIR
X
X
X
Version 3.70 UW 13
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X attributed targets and a collection of small distributed
X makefile stubs.
X
X Macro variables may be defined within the makefile, on the
X command line, or imported from the environment.
X
X dmake supports several non-standard macro expansions: The
X first is of the form:
X
X $(macro_name:modifier_list:modifier_list:...)
X
X where modifier_list is chosen from the set { D or d, F or f,
X B or b, S or s, T or t } and
X
X d - directory portion of all path names
X f - file (including suffix) portion of path names
X b - file (not including suffix) portion of path names
X s - simple pattern substitution
X t - tokenization.
X
X Thus if we have the example:
X
X test = d1/d2/d3/a.out f.out d1/k.out
X
X The following macro expansions produce the values on the
X right of '-->' after expansion.
X
X $(test:d) --> d1/d2/d3/ d1/
X $(test:b) --> a f k
X $(test:f) --> a.out f.out k.out
X ${test:db} --> d1/d2/d3/a f d1/k
X ${test:s/out/in/:f} --> a.in f.in k.in
X $(test:f:t"+") --> a.out+f.out+k.out
X
X If a token ends in a string composed from the value of the
X macro DIRBRKSTR (ie. ends in a directory separator string,
X e.g. '/' in UNIX) and you use the :d modifier then the
X expansion returns the directory name less the final direc-
X tory separator string. Thus successive pairs of :d modif-
X iers each remove a level of directory in the token string.
X
X The tokenization modifier takes all white space separated
X tokens from the macro value and separates them by the quoted
X separator string. The separator string may contain the fol-
X lowing escape codes \a => <bel>, \b => <backspace>, \f =>
X <formfeed>, \n => <nl>, \r => <cr>, \t => <tab>, \v =>
X <vertical tab>, \" => ", and \xxx => <xxx> where xxx is the
X octal representation of a character. Thus the expansion:
X
X $(test:f:t"+\n")
X produces:
X a.out+
X
X
X
Version 3.70 UW 14
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X f.out+
X k.out
X
X The second non-standard form of macro expansion allows for
X recursive macros. It is possible to specify a $(macro_name)
X or ${macro_name} expansion where macro_name contains more $(
X ... ) or ${ ... } macro expansions itself.
X
X For example $(CC$(_HOST)$(_COMPILER)) will first expand
X CC$(_HOST)$(_COMPILER) to get a result and use that result
X as the name of the macro to expand. This is useful for
X writing a makefile for more than one target environment. As
X an example consider the following hypothetical case. Suppose
X that _HOST and _COMPILER are imported from the environment
X and are set to represent the host machine type and the host
X compiler respectively.
X
X CFLAGS_VAX_CC = -c -O # _HOST == "_VAX", _COMPILER == "_CC"
X CFLAGS_PC_MSC = -c -ML # _HOST == "_PC", _COMPILER == "_MSC"
X
X # redefine CFLAGS macro as:
X
X CFLAGS := $(CFLAGS$(_HOST)$(_COMPILER))
X
X This causes CFLAGS to take on a value that corresponds to
X the environment in which the make is being invoked.
X
X The final non-standard macro expansion is of the form:
X
X string1{token_list}string2
X
X where string1, string2 and token_list are expanded. After
X expansion, string1 is prepended to each token found in
X token_list and string2 is appended to each resulting token
X from the previous prepend. string1 and string2 are not del-
X imited by white space whereas the tokens in token_list are.
X A null token in the token list is specified using "". Thus
X using another example we have:
X
X test/{f1 f2}.o --> test/f1.o test/f2.o
X test/ {f1 f2}.o --> test/ f1.o f2.o
X test/{f1 f2} .o --> test/f1 test/f2 .o
X test/{"f1" ""}.o --> test/f1.o test/.o
X
X and
X
X test/{d1 d2}/{f1 f2}.o --> test/d1/f1.o test/d1/f2.o
X test/d2/f1.o test/d2/f2.o
X
X This last expansion is activated only when the first charac-
X ters of token_list appear immediately after the opening '{'
X with no intervening white space. The reason for this
X
X
X
Version 3.70 UW 15
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X restriction is the following incompatibility with Bourne
X Shell recipes. The line
X
X { echo hello;}
X
X is valid /bin/sh syntax; while
X
X {echo hello;}
X
X is not. Hence the latter triggers the enhanced macro expan-
X sion while the former causes it to be suppressed. See the
X SPECIAL MACROS section for a description of the special mac-
X ros that dmake defines and understands.
X
RULES AND TARGETS
X A makefile contains a series of entries that specify depen-
X dencies. Such entries are called target/prerequisite or
X rule definitions. Each rule definition is optionally fol-
X lowed by a set of lines that provide a recipe for updating
X any targets defined by the rule. Whenever dmake attempts to
X bring a target up to date and an explicit recipe is provided
X with a rule defining the target, that recipe is used to
X update the target. A rule definition begins with a line
X having the following syntax:
X
X <targets> [<attributes>] <ruleop> [<prerequisites>] [;<recipe>]
X
X targets is a non-empty list of targets. If the target is a
X special target (see SPECIAL TARGETS section below) then it
X must appear alone on the rule line. For example:
X
X .IMPORT .ERROR : ...
X
X is not allowed since both .IMPORT and .ERROR are special
X targets. Special targets are not used in the construction
X of the dependency graph and will not be made.
X
X attributes is a possibly empty list of attributes. Any
X attribute defined in the ATTRIBUTES section above may be
X specified. All attributes will be applied to the list of
X named targets in the rule definition. No other targets will
X be affected.
X
X
X NOTE: As stated earlier, if both the target list and
X prerequisite list are empty but the attributes list
X is not, then the specified attributes affect all
X targets in the makefile.
X
X
X ruleop is a separator which is used to identify the targets
X from the prerequisites. Optionally it also provides a
X
X
X
Version 3.70 UW 16
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X facility for modifying the way in which dmake handles the
X making of the associated targets. In its simplest form the
X operator is a single ':', and need not be separated by white
X space from its neighboring tokens. It may additionally be
X followed by any of the modifiers { !, ^, -, : }, where:
X
X
X ! says execute the recipe for the associated targets once
X for each out of date prerequisite. Ordinarily the
X recipe is executed once for all out of date prere-
X quisites at the same time.
X
X ^ says to insert the specified prerequisites, if any,
X before any other prerequisites already associated with
X the specified targets. In general, it is not useful to
X specify ^ with an empty list of prerequisites.
X
X - says to clear the previous list of prerequisites before
X adding the new prerequisites. Thus,
X
X .SUFFIXES :
X .SUFFIXES : .a .b
X
X can be replaced by
X
X .SUFFIXES :- .a .b
X
X however the old form still works as expected. NOTE:
X .SUFFIXES is ignored by dmake it is used here simply as
X an example.
X
X : When the rule operator is not modified by a second ':'
X only one set of rules may be specified for making a
X target. Multiple definitions may be used to add to the
X list of prerequisites that a target depends on. How-
X ever, if a target is multiply defined only one defini-
X tion may specify a recipe for making the target.
X
X When a target's rule operator is modified by a second
X ':' (:: for example) then this definition may not be
X the only definition with a recipe for the target.
X There may be other :: target definition lines that
X specify a different set of prerequisites with a dif-
X ferent recipe for updating the target. Any such target
X is made if any of the definitions find it to be out of
X date with respect to the related prerequisites and the
X corresponding recipe is used to update the target.
X
X In the following simple example, each rule has a `::'
X ruleop. In such an operator we call the first `:' the
X operator, and the second `:' the modifier.
X
X
X
X
Version 3.70 UW 17
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X a.o :: a.c b.h
X first recipe for making a.o
X
X a.o :: a.y b.h
X second recipe for making a.o
X
X If a.o is found to be out of date with respect to a.c
X then the first recipe is used to make a.o. If it is
X found out of date with respect to a.y then the second
X recipe is used. If a.o is out of date with respect to
X b.h then both recipes are invoked to make a.o. In the
X last case the order of invocation corresponds to the
X order in which the rule definitions appear in the
X makefile.
X
X Targets defined using a single `:' operator with a recipe
X may be redefined again with a new recipe by using a `:'
X operator with a `:' modifier. This is equivalent to a tar-
X get having been initially defined with a rule using a `:'
X modifier. Once a target is defined using a `:' modifier it
X may not be defined again with a recipe using only the `:'
X operator with no `:' modifier. In both cases the use of a
X `:' modifier creates a new list of prerequisites and makes
X it the current prerequisite list for the target. The `:'
X operator with no recipe always modifies the current list of
X prerequisites. Thus assuming each of the following defini-
X tions has a recipe attached, then:
X
X joe : fred ... (1)
X joe :: more ... (2)
X
X and
X
X joe :: fred ... (3)
X joe :: more ... (4)
X
X are legal and mean: add the recipe associated with (2), or
X (4) to the set of recipes for joe, placing them after exist-
X ing recipes for making joe. The constructs:
X
X joe :: fred ... (5)
X joe : more ... (6)
X
X and
X
X joe : fred ... (7)
X joe : more ... (8)
X
X are errors since we have two sets of perfectly good recipes
X for making the target.
X
X
X
X
X
Version 3.70 UW 18
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X prerequisites is a possibly empty list of targets that must
X be brought up to date before making the current target.
X
X recipe is a short form and allows the user to specify short
X rule definitions on a single line. It is taken to be the
X first recipe line in a larger recipe if additional lines
X follow the rule definition. If the semi-colon is present
X but the recipe line is empty (ie. null string) then it is
X taken to be an empty rule. Any target so defined causes the
X Don't know how to make ... error message to be suppressed
X when dmake tries to make the target and fails. This silence
X is maintained for rules that are terminated by a semicolon
X and have no following recipe lines, for targets listed on
X the command line, for the first target found in the
X makefile, and for any target having no recipe but containing
X a list of prerequisites (see the COMPATIBILITY section for
X an exception to this rule if the AUGMAKE (-A) flag was
X specified.
X
RECIPES
X The traditional format used by most versions of Make defines
X the recipe lines as arbitrary strings that may contain macro
X expansions. They follow a rule definition line and may be
X spaced apart by comment or blank lines. The list of recipe
X lines defining the recipe is terminated by a new target
X definition, a macro definition, or end-of-file. Each recipe
X line MUST begin with a <TAB> character which may optionally
X be followed with one or all of the characters '@%+-'. The
X '-' indicates that non-zero exit values (ie. errors) are to
X be ignored when this recipe line is executed, the '+' indi-
X cates that the current recipe line is to be executed using
X the shell, the '%' indicates that dmake should swap itself
X out to secondary storage (MSDOS only) before running the
X recipe and the '@' indicates that the recipe line should NOT
X be echoed to the terminal prior to being executed. Each
X switch is off by default (ie. by default, errors are signi-
X ficant, commands are echoed, no swapping is done and a shell
X is used only if the recipe line contains a character found
X in the value of the SHELLMETAS macro). Global settings
X activated via command line options or special attribute or
X target names may also affect these settings. An example
X recipe:
X
X target :
X first recipe line
X second recipe line, executed independently of the first.
X @a recipe line that is not echoed
X -and one that has errors ignored
X %and one that causes dmake to swap out
X +and one that is executed using a shell.
X
X
X
X
X
Version 3.70 UW 19
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X The second and new format of the recipe block begins the
X block with the character '[' (the open group character) in
X the last non-white space position of a line, and terminates
X the block with the character ']' (the close group character)
X in the first non-white space position of a line. In this
X form each recipe line need not have a leading TAB. This is
X called a recipe group. Groups so defined are fed intact as
X a single unit to a shell for execution whenever the
X corresponding target needs to be updated. If the open group
X character '[' is preceded by one or all of -, @ or % then
X they apply to the entire group in the same way that they
X apply to single recipe lines. You may also specify '+' but
X it is redundant as a shell is already being used to run the
X recipe. See the MAKING TARGETS section for a description of
X how dmake invokes recipes. Here is an example of a group
X recipe:
X
X target :
X [
X first recipe line
X second recipe line
X all of these recipe lines are fed to a
X single copy of a shell for execution.
X ]
X
X
TEXT DIVERSIONS
X dmake supports the notion of text diversions. If a recipe
X line contains the macro expression
X
X $(mktmp[,[file][,text]] data)
X
X then all text contained in the data expression is expanded
X and is written to a temporary file. The return value of the
X macro is the name of the temporary file.
X
X data can be any text and must be separated from the 'mktmp'
X portion of the macro name by white-space. The only restric-
X tion on the data text is that it must contain a balanced
X number of parentheses of the same kind as are used to ini-
X tiate the $(mktmp ...) expression. For example:
X
X $(mktmp $(XXX))
X
X is legal and works as expected, but:
X
X $(mktmp text (to dump to file)
X
X is not legal. You can achieve what you wish by either
X defining a macro that expands to '(' or by using {} in the
X macro expression; like this:
X
X
X
X
Version 3.70 UW 20
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X ${mktmp text (to dump to file}
X
X Since the temporary file is opened when the macro containing
X the text diversion expression is expanded, diversions may
X now be nested and any diversions that are created as part of
X ':=' macro expansions persist for the duration of the dmake
X run. The diversion text may contain the same escape codes
X as those described in the MACROS section. Thus if the data
X text is to contain new lines they must be inserted using the
X \n escape sequence. For example the expression:
X
X all:
X cat $(mktmp this is a\n\
X test of the text diversion\n)
X
X is replaced by:
X
X cat /tmp/mk12294AA
X
X where the temporary file contains two lines both of which
X are terminated by a new-line. If the data text spans multi-
X ple lines in the makefile then each line must be continued
X via the use of a \. A second more illustrative example gen-
X erates a response file to an MSDOS link command:
X
X OBJ = fred.obj mary.obj joe.obj
X all : $(OBJ)
X link @$(mktmp $(^:t"+\n")\n)
X
X The result of making `all' in the second example is the com-
X mand:
X
X link @/tmp/mk02394AA
X
X where the temporary file contains:
X
X fred.obj+
X mary.obj+
X joe.obj
X
X The last line of the file is terminated by a new-line which
X is inserted due to the \n found at the end of the data
X string.
X
X If the optional file specifier is present then its expanded
X value is the name of the temporary file to create. Whenever
X a $(mktmp ...) macro is expanded the macro $(TMPFILE) is set
X to a new temporary file name. Thus the construct:
X
X $(mktmp,$(TMPFILE) data)
X
X is completely equivalent to not specifying the $(TMPFILE)
X
X
X
Version 3.70 UW 21
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X optional argument. Another example that would be useful for
X MSDOS users with a Turbo-C compiler
X
X $(mktmp,turboc.cfg $(CFLAGS))
X
X will place the contents of CFLAGS into a local turboc.cfg
X file. The second optional argument, text, if present alters
X the name of the value returned by the $(mktmp ...) macro.
X
X Under MS-DOS text diversions may be a problem. Many DOS
X tools require that path names which contain directories use
X the \ character to delimit the directories. Some users how-
X ever wish to use the '/' to delimit pathnames and use
X environments that allow them to do so. The macro USESHELL
X is set to "yes" if the current recipe is forced to use a
X shell via the .USESHELL or '+' directives, otherwise its
X value is "no". The dmake startup files define the macro
X DIVFILE whose value is either the value of TMPFILE or the
X value of TMPFILE edited to replace any '/' characters to the
X appropriate value based on the current shell and whether it
X will be used to execute the recipe.
X
X Previous versions of dmake defined text diversions using <+,
X +> strings, where <+ started a text diversion and +> ter-
X minated one. dmake is backward compatible with this con-
X struct if the <+ and +> appear literally on the same recipe
X line or in the same macro value string. In such instances
X the expression:
X
X <+data+>
X
X is mapped to:
X
X $(mktmp data)
X
X which is fully output compatible with the earlier construct.
X <+, +> constructs whose text spans multiple lines must be
X converted by hand to use $(mktmp ...).
X
X If the environment variable TMPDIR is defined then the tem-
X porary file is placed into the directory specified by that
X variable. A makefile can modify the location of temporary
X files by defining a macro named TMPDIR and exporting it
X using the .EXPORT special target.
X
SPECIAL TARGETS
X This section describes the special targets that are recog-
X nized by dmake. Some are affected by attributes and others
X are not.
X
X .ERROR If defined then the recipe associated with
X this target is executed whenever an error
X
X
X
Version 3.70 UW 22
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X condition is detected by dmake. All attri-
X butes that can be used with any other target
X may be used with this target. Any prere-
X quisites of this target will be brought up to
X date during its processing. NOTE: errors
X will be ignored while making this target, in
X extreme cases this may cause some problems.
X
X .EXPORT All prerequisites associated with this target
X are assumed to correspond to macro names and
X they and their values are exported to the
X environment as environment strings at the
X point in the makefile at which this target
X appears. Any attributes specified with this
X target are ignored. Only macros which have
X been assigned a value in the makefile prior to
X the export directive are exported, macros as
X yet undefined are not exported.
X
X .IMPORT Prerequisite names specified for this target
X are searched for in the environment and
X defined as macros with their value taken from
X the environment. If the special name .EVERY-
X THING is used as a prerequisite name then all
X environment variables defined in the environ-
X ment are imported. The functionality of the
X -e flag can be forced by placing the construct
X .IMPORT : .EVERYTHING at the start of a
X makefile. Similarly, by placing the construct
X at the end, one can emulate the effect of the
X -E command line flag. If a prerequisite name
X cannot be found in the environment an error
X message is issued. .IMPORT accepts the
X .IGNORE attribute. When given, it causes
X dmake to ignore the above error. See the MAC-
X ROS section for a description of the process-
X ing of imported macro values.
X
X .INCLUDE Parse another makefile just as if it had been
X located at the point of the .INCLUDE in the
X current makefile. The list of prerequisites
X gives the list of makefiles to try to read.
X If the list contains multiple makefiles then
X they are read in order from left to right.
X The following search rules are used when try-
X ing to locate the file. If the filename is
X surrounded by " or just by itself then it is
X searched for in the current directory. If it
X is not found it is then searched for in each
X of the directories specified for the .INCLU-
X DEDIRS special target. If the file name is
X surrounded by < and >, (ie.
X
X
X
Version 3.70 UW 23
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X <my_spiffy_new_makefile>) then it is searched
X for only in the directories given by the
X .INCLUDEDIRS special target. In both cases if
X the file name is a fully qualified name start-
X ing at the root of the file system then it is
X only searched for once, and the .INCLUDEDIRS
X list is ignored. .INCLUDE accepts the .IGNORE
X and .SETDIR attributes. If .IGNORE attribute
X is given and the file cannot be found then
X dmake continues processing, otherwise an error
X message is generated. The .SETDIR attribute
X causes dmake to change directories to the
X specified directory prior to attempting the
X include operation.
X
X .INCLUDEDIRS The list of prerequisites specified for this
X target defines the set of directories to
X search when trying to include a makefile.
X
X .KEEP_STATE This special target is a synonym for the macro
X definition
X
X .KEEP_STATE := _state.mk
X
X It's effect is to turn on STATE keeping and to
X define _state.mk as the state file.
X
X .MAKEFILES The list of prerequisites is the set of files
X to try to read as the default makefile. By
X default this target is defined as:
X
X .MAKEFILES : makefile.mk Makefile
X makefile
X
X
X .SOURCE The prerequisite list of this target defines a
X set of directories to check when trying to
X locate a target file name. See the section on
X BINDING of targets for more information.
X
X .SOURCE.suff The same as .SOURCE, except that the
X .SOURCE.suff list is searched first when try-
X ing to locate a file matching the a target
X whose name ends in the suffix .suff.
X
X .REMOVE The recipe of this target is used whenever
X dmake needs to remove intermediate targets
X that were made but do not need to be kept
X around. Such targets result from the applica-
X tion of transitive closure on the dependency
X graph.
X
X
X
X
Version 3.70 UW 24
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X In addition to the special targets above, several other
X forms of targets are recognized and are considered special,
X their exact form and use is defined in the sections that
X follow.
X
SPECIAL MACROS
X dmake defines a number of special macros. They are divided
X into three classes: control macros, run-time macros, and
X function macros. The control macros are used by dmake to
X configure its actions, and are the preferred method of doing
X so. In the case when a control macro has the same function
X as a special target or attribute they share the same name as
X the special target or attribute. The run-time macros are
X defined when dmake makes targets and may be used by the user
X inside recipes. The function macros provide higher level
X functions dealing with macro expansion and diversion file
X processing.
X
CONTROL MACROS
X To use the control macros simply assign them a value just
X like any other macro. The control macros are divided into
X three groups: string valued macros, character valued macros,
X and boolean valued macros.
X
X The following are all of the string valued macros. This
X list is divided into two groups. The first group gives the
X string valued macros that are defined internally and cannot
X be directly set by the user.
X
X DIRBRKSTR Contains the string of chars used to terminate
X the name of a directory in a pathname. Under
X UNIX its value is "/", under MSDOS its value
X is "/\:".
X
X INCDEPTH This macro's value is a string of digits
X representing the current depth of makefile
X inclusion. In the first makefile level this
X value is zero.
X
X MFLAGS Is the list of flags that were given on the
X command line including a leading switch char-
X acter. The -f flag is not included in this
X list.
X
X MAKECMD Is the name with which dmake was invoked.
X
X MAKEDIR Is the full path to the initial directory in
X which dmake was invoked.
X
X MAKEFILE Contains the string "-f makefile" where,
X makefile is the name of initial user makefile
X that was first read.
X
X
X
Version 3.70 UW 25
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X MAKEFLAGS Is the same as $(MFLAGS) but has no leading
X switch character. (ie. MFLAGS = -$(MAKEFLAGS))
X
X MAKEMACROS Contains the complete list of macro expres-
X sions that were specified on the command line.
X
X MAKETARGETS Contains the name(s) of the target(s), if any,
X that were specified on the command line.
X
X MAXPROCESSLIMIT
X Is a numeric string representing the maximum
X number of processes that dmake can use when
X making targets using parallel mode.
X
X NULL Is permanently defined to be the NULL string.
X This is useful when comparing a conditional
X expression to an NULL value.
X
X PWD Is the full path to the current directory in
X which make is executing.
X
X TMPFILE Is set to the name of the most recent tem-
X porary file opened by dmake. Temporary files
X are used for text diversions and for group
X recipe processing.
X
X TMD Stands for "To Make Dir", and is the path from
X the present directory (value of $(PWD)) to the
X directory that dmake was started up in (value
X of $(MAKEDIR)). This macro is modified when
X .SETDIR attributes are processed.
X
X USESHELL The value of this macro is set to "yes" if the
X current recipe is forced to use a shell for
X its execution via the .USESHELL or '+' direc-
X tives, its value is "no" otherwise.
X
X
X The second group of string valued macros control dmake
X behavior and may be set by the user.
X
X .SETDIR If this macro is assigned a value then dmake
X will change to the directory given by that
X value before making any targets.
X
X AUGMAKE If set to a non NULL value will enable the
X transformation of special meta targets to
X support special AUGMAKE inferences (See the
X COMPATIBILITY section).
X
X DIRSEPSTR Contains the string that is used to separate
X directory components when path names are
X
X
X
Version 3.70 UW 26
X
X
X
X
DMAKE(p) Unsupported Free Software DMAKE(p)
X
X
X
X constructed. It is defined with a default
X value at startup.
X
X DIVFILE Is defined in the startup file and gives the
X name that should be returned for the diver-
X sion file name when used in $(mktmp ...)
X expansions, see the TEXT DIVERSION section
X for details.
X
X .KEEP_STATE Assigning this macro a value tells dmake the
X name of the state file to use and turns on
X the keeping of state information for any
X targets that are brought up to date by the
X make.
X
X GROUPFLAGS This macro gives the set of flags to pass to
X the shell when invoking it to execute a
X group recipe. The value of the macro is the
X list of flags with a leading switch indica-
X tor. (ie. `-' under UNIX)
X
X GROUPSHELL This macro defines the full path to the exe-
X cutable image to be used as the shell when
X processing group recipes. This macro must
X be defined if group recipes are used. It is
X assigned a default value in the startup
X makefile. Under UNIX this value is /bin/sh.
X
X GROUPSUFFIX If defined, this macro gives the string to
X use as a suffix when creating group recipe
SHAR_EOF
true || echo 'restore of dmake/man/dmake.nc failed'
fi
echo 'End of part 13, continue with part 14'
echo 14 > _shar_seq_.tmp
exit 0
exit 0 # Just in case...
--
Kent Landfield INTERNET: kent at sparky.IMD.Sterling.COM
Sterling Software, IMD UUCP: uunet!sparky!kent
Phone: (402) 291-8300 FAX: (402) 291-4362
Please send comp.sources.misc-related mail to kent at uunet.uu.net.
More information about the Comp.sources.misc
mailing list