TVX: PD Editor (7b of 7, repost)
wampler at unmvax.UUCP
wampler at unmvax.UUCP
Fri Jan 17 03:36:02 AEST 1986
This was originally the 2nd half of 7 of 7, but
has been split to keep the postings < 64k. Use
cat to recombine with 7a of 7.
#--------CUT---------CUT---------CUT---------CUT--------#
#########################################################
# #
# This is a shell archive file. To extract files: #
# #
# 1) Make a directory (like tvx) for the files. #
# 2) Write a file, such as "filen.shar", containing #
# this archive file into the directory. #
# 3) Type "sh file.shar". Do not use csh. #
# #
#########################################################
#
#
echo Extracting tvx_refb.doc:
sed 's/^X//' >tvx_refb.doc <<\SHAR_EOF
X
X
XTVX Reference Manual 11/27/85
X
X
Xthe mistake, all the edit commands before the last '^B' as well as the
X'^B' should be removed from the log file before applying it to the
Xprevious version since '^B' created a backup copy of the file. This
Xmeans that all the editing commands entered before the '^B' will
Xalready be saved, and thus should not be restored. Failure to take
Xthis into account will result in a randomly edited file!!!
X
X The other case involves the '^Y' yank external file command. The
Xexternal file read as a part of the '^Y' command is read using the
Xsame I/O channel as the backup log file input, and thus both cannot be
Xused at the same time. If the backup log file contains any '^Y'
Xcommands (displayed in the log file as '@Y'), you must remove them.
XObviously, this will alter the order of the commands in the file, and
Xyou will need to use a special procedure. Suppose, for example, that
Xthe backup log file contained one '^Y' command. Make two copies of
Xthe backup log file. Edit the first, and remove all commands
Xfollowing the '^Y' command, including the '^Y' command. Then edit the
Xother copy, and remove all commands before the '^Y', including the
X'^Y'. Then, edit the backup copy of the original file. First, apply
Xthe first backup log file. This will get you to the point right
Xbefore the '^Y'. Then without changing the cursor position, manually
Xenter the '^Y' command and file name. Finally, apply the second copy
Xof the backup log file.
X
X It is also possible to write log command files of your own to
Xcarry out specific commands. This allows the creation of "macros"
Xthat can be executed as needed. When creating log files of your own,
Xyou should remember that control characters and backspaces must appear
Xas encoded characters. The '@' is the encoding character. Control
Xcharacters will appear as '@' followed by the appropriate letter: '^I'
X= '@I', enter = '@M', etc. An '@' itself is '@@', and backspace is
X'@H', although you should never need a backspace in your own files
X(use -K).
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -18-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** USER CUSTOMIZATION of TVX ***
X
X A program called TVCONFIG is also provided with most versions of
XTVX. It allows you to customize TVX to a great extent. The program
Xgenerates a file called CONFIG.TVX. When TVX is started with a
Xcommand line of the form: 'TVX filename -c=config.tvx", the values
Xdefined in CONFIG.TVX will be used instead of the defaults. (Warning:
XTVCONFIG is may not be implemented for all systems. Specifically, the
Xdefault Unix distribution does not provide TVCONFIG capabilities.)
X
X TVCONFIG is mostly self explanatory. It allows you to change the
Xfollowing:
X
X1. Commands. All of the approximately 50 commands can be redefined.
XThere are some restrictions: all commands must be a single letter, and
Xcase is ignored. The '@', ESCAPE, and '<>' commands cannot be
Xchanged. Commands cannot be a number, including a '-'.
X
X2. Synonyms. You may define some synonyms, such as space for right,
Xor RETURN for down. You cannot duplicate previously defined
Xcommands.
X
X3. Function Keys. Up to 50 function keys may be defined to be
Xequivalent to any command (in fact any letter or character). When a
Xfunction key is pressed, TVX will translate it to the character you
Xspecify. If your function keys use an ESCAPE as a prefix character,
Xyou will have to redefine a function key to be ESCAPE!
X
X4. Parameters. You may change the default for any of the ':'
Xparameters.
X
X After you have built a suitable working version of CONFIG.TVX,
Xanother program called TVPATCH has been provided (for MS-DOS systems
Xonly) to allow TVX.EXE (or TVX.COM) to be permanently patched with the
Xoptions set by TVCONFIG. This means you won't have keep track of the
XCONFIG.TVX file any more, and won't need the '-c' switch.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -19-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** Error Messages ***
X
X*** Abort, are you sure?
X This message is displayed after the "abort" command has been
Xentered. A reply of y or Y will cause the session to be terminated.
X
X*** Bad O= switch
X An incorrect format was specified for the O= switch.
X
X*** Bad @ name
X An invalid file name was specified. Re-enter.
X
X*** Bad command: x
X The command is not a valid TVX command.
X
X*** Bad file name
X An invalid file name was specified. Re-enter.
X
X*** Bad output file: filename
X An invalid output file was specified.
X
X*** Bad par (val | name)
X An invalid value or parameter name was specified.
X
X*** Bad switch
X An invalid switch was specified. Re-enter file name and
Xswitches.
X
X*** buffer empty
X Information message. Displayed after a new file has been
Xcreated, or when the write buffer command is executed and the text
Xbuffer is empty.
X
X*** Can't create new name
X TVX was unable to create a new name for the output file. Free
Xsome disk space, rename the file, try again.
X
X*** Can't insert that
X There are three values that TVX uses internally, and thus are not
Xvalid as user inserted characters in the text buffer.
X
X*** Compacting buffer
X Information message. Displayed when TVX is compacting the
Xbuffer. The compaction process may take several seconds.
X
X*** Compacting done
X Information. The compaction is complete.
X
X*** Compactor lost: quit now!
X An internal error has been discovered. Exit TVX immediately, and
Xpreserve the backup copy. Try the session again.
X
X*** Create? (y/n)
X The file name specified does not exist. A y answer will cause
Xthe file to be created. A n answer will allow the file name to be
Xrespecified.
X
X
X -20-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X*** Error reopening
X Something has gone wrong with the 'File beginning' command.
XExit, and try editing the file again. Be careful since an empty file
Xmay have been created.
X
X*** File only part read
X There was not enough room in the save buffer to hold the entire
Xexternal file specified in the 'merge' command. Try re-editing using
Xthe 's' big buffer switch.
X
X*** lines filled
X TVX has run out of room to add more lines. Use the 'write
Xbuffer' or 'file beginning' command to get more space for new lines.
X
X*** no get room
X There is not enough room in the text buffer to insert all the
Xtext in the save buffer. Use the 'file begin' or 'write buffer'
Xcommands, and try again. The '-^W' command is often useful.
X
X*** no more lines for insert
X See "lines filled".
X
X*** no nesting
X TVX does not allow nested repeat loops: "<<..>>".
X
X*** no save room
X There is not enough room left to save any more text in the save
Xbuffer. Try saving smaller blocks, or use the 'file begin' command to
Xget more space.
X
X*** No! buffer empty
X Many TVX commands are not allowed on an empty buffer. Sometimes,
Xjust inserting a blank line will allow the desired command to be
Xused.
X
X*** No: read only
X 'File beginning' command invalid when the 'r' read only switch
Xwas used.
X
X*** not found
X The current find pattern was not found.
X
X*** Not last line!
X TVX will allow you to save the last line of the file only once.
X
X*** reading file...
X Displayed while TVX is reading in the file.
X
X*** rename fails
X Something has gone wrong with the 'File beginning' or 'quit'
Xcommands. On timeshared systems, this may mean you didn't have write
Xcapability for the file. The work file will probably be retained, and
Xcan be manually renamed or copied using standard operating system
Xcommands.
X
X*** search fails
X
X
X -21-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X A cross-buffer search has failed to find pattern.
X
X*** writing buffer
X Displayed when the buffer is being written out.
X
X*** writing partial buffer
X Partial buffer only, as caused by the '-^W' command.
X
X*** Yank filename:
X Enter the name of the file you want to read into the save
Xbuffer.
X
X*** 100 chars only
X At most, 100 characters are allowed in each find pattern and each
Xrepeat loop.
X
X*** <> not complete
X The repeat loop has terminated before the specified number times
Xhave been executed. This is usually what you wanted, and can be
Xcaused by failing to find a pattern, or reaching the end of the
Xbuffer. An invalid command or other error will also cause a repeat
Xloop to terminate.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -22-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** TTY MODE ***
X
X Normally, TVX is used as a full screen editor. It will work on
Xdumb crt terminals or on hard copy terminals, however. The alternate
Xmode of operation is called tty mode. Tty mode is also useful for
Xterminals hooked up with slow baud rates. Almost all TVX commands are
Xsupported in tty mode. The main difference is that the editor no
Xlonger operates in a what you see is what you get mode.
X
X When TVX is first started in tty mode (either by the -t command
Xline switch, or using 1:t), it will display a 'tvx>' prompt. The
Xnormal mnemonic commands are then entered on the input line. The
Xinput line is terminated by a <return> (which is not sent as a
Xcommand). Each letter on the input line will be interpreted as a TVX
Xcommand. Thus, entering a line: 'dddr' would move the cursor 3 lines
Xdown and one character right. The result of the commands will not be
Xdisplayed however.
X
X The 'V' verify command operates specially for tty mode, and is
Xused to type out lines of the file. The normal procedure, then is to
Xenter commands on the command input line, then enter appropriate 'V'
Xcommands to display relevant lines of the buffer.
X
X As long as normal TVX commands are entered, the command line
Xprompt is 'tvx>', and the terminating <return> sends commands to TVX
Xto execute. In insert, find, and repeat, the prompt will change to
X'+'. All text entered, including <return>'s is entered into the text,
Xthe find pattern, or the repeat loop buffer. An Escape ends the
Xcommand, and an additional <return> sends the line to TVX.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -23-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** INSTALLATION OF TVX ***
X
X If you have the C source code of TVX, this section has some notes
Xyou should find useful if you recompile the code to customize TVX for
Xyour system. It should also be helpful if you are installing TVX on a
Xnew system. If you are just a user, then you can ignore this
Xsection.
X
X
X*** General Comments ***
X
X TVX has been designed to be portable. It has had versions
Xrunning under CP/M-80, MS-DOS, RT-11, RSX-11, VMS, and Unix BSD 4.2.
XThe heart of TVX portability is the terminal driver. For dedicated
Xsystems, the control codes used by a specific terminal are hard wired
Xinto a C global variables and a terminal specific version is
Xcompiled. It has been customary to give a unique name to each
Xdifferent version such as TVV for a VT-52 version, TVT for a televideo
Xversion, etc. The Unix version of TVX has been written to take
Xadvantage of the TERMCAP library usually provided, and is thus
Xterminal independent.
X
X Since terminals differ widely, TVX tries to update the screen as
Xbest as possible using the control codes available. The minimum set
Xof control sequences required by TVX include direct x-y cursor
Xpositioning, and erase from cursor to the end of the current line.
XAlmost all terminals have at least these two controls. The only known
Xterminal widely available that does not have both of these is the
XADM-3a. Thus, TVX will NOT work on ADM-3a's. Another desirable
Xcontrol sequence is the ability to insert a blank line at the top of
Xthe screen (reverse scroll). This allows TVX to scroll rather than
Xjump from one screen to the next. However, TVX will perform
Xadequately even on terminals with only x-y and erase to end of line.
X
X*** Source Files Supplied ***
X
X The following files are included in most distributions:
X
X TVX_1.C - main part of code (part 1)
X TVX_2.C - main part of code (part 2)
X These two files are mostly os and terminal independent.
X TVX_LEX.C - defaults, some os dependent stuff in here. Major
X changes in defaults can be fixed by recompiling this file.
X TVX_IO.C - almost all I/O, including screen, confined to this file.
X TVX_LIB.C - misc library routines needed by TVX.
X TVX_IBM.C - IBM-PC specific code, specifically the screen driver
X (TVX_IBM.ASM - hand optimized version of TVX_IBM.C)
X TVX_UNIX.C - contains unix specific code, including termcap driver
X TVX_DEFS.IC - #define's for version, os, terminal, defaults
X TVX_GLBL.IC - global data structures
X TVX_TERM.IC - definitions for various terminals and systems
X
X TVCONFIG.C - used to build CONFIG.TVX file for -c switch
X TVPATCH.C - MS-DOS versions only - used to permanently apply
X config settings to TVX.EXE.
X
X
X
X -24-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X TVX_MAKE.BAT - MS-DOS Batch file to build TVX using cii c-86.
X TVX_MAKE.UNX - Unix Makefile to make on unix.
X
X TVX_REF.DOC - This file, preformatted for printing on a "standard"
X printer - 80 columns by 66 lines.
X
X
X*** Screen Driver and Control Sequences ***
X
X The actual codes used by TVX to update the screen are global
Xvariables in the 'tvx_glbl.ic' file. Using the '#ifdef EXTERN' trick
Xdescribed in that file, the screen variables (plus most other relevant
Xglobal variables) are included as external references. The actual
Xdefinitions for a given terminal are included in a file called
X'tvx_term.ic'. Several sample definitions are included in the
Xdistribution code. A description of each relevant variable follows:
X
X
X** X-Y Cursor Addressing
X
Xint addx - amount to add to internal x position get terminal's x
Xvalue. Terminals typically encode x-y as a single printable
Xcharacter, thus requiring the addition of a blank to make x-y
Xprintable. Since TVX uses a 1,1 origin, this value will commonly be
X31.
X
Xint addy - same as addx, but for y position.
X
Xchar cxychr - true (1) if convert xy binary representation to ascii
Xstring.
X
Xchar cxy1st - 'l' if line coordinate first, 'c' if column first.
X
Xchar cxybeg[8], char cxymid[8], char cxyend[8] - The x-y cursor
Xcontrol sequence usually takes one of two forms: <control><x><y> or
X<control><x><middle><y><end>. The x and y may be reversed. These
Xthree arrays are used to send the proper control sequence for xy
Xpositioning.
X
X
X*** Other control sequences
X
Xchar cversn[12] - a version string to identify terminal.
X
Xchar cerrbg[8], char cerred[8] - sequences sent when an error message
Xsent to terminal's last line. Note that cerrbe is sent BEFORE the
Xcursor is moved to the last line, and cerred is sent before the cursor
Xis returned to the original position. Some terminals give problems if
Xa highlight sequence is sent before a cursor positioning sequence. A
Xbell is usually safe for most versions.
X
Xchar ctopb[8] - This sequence should insert a blank line when the
Xcursor is at the top left corner. It is often called reverse line
Xfeed. A command to insert a line usually performs the same function,
Xbut some terminals don't have both.
X
X
X
X -25-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
Xchar cinit[20], char cendit[20] - these sequences are sent to
Xinitialize and reset the terminal.
X
Xchar cbotb[8] - this sequence scrolls the screen up one line when the
Xcursor is on the last line. Line feed works for any terminal
Xencountered to date.
X
Xchar celin[8] - Erase from cursor to end of line. This sequence is
Xrequired for operation of TVX.
X
Xchar cescr[8] - Erase from cursor to end of screen. If the terminal
Xdoesn't have this, it is simulated using multiple celins.
X
Xchar ccsrcm[8], char ccsrin[8] - These are used to change the cursor
Xfrom command mode to insert mode. Many terminals do not support a
Xmethod of changing the cursor shape. These have been also been used
Xto change the screen from normal to reverse video an back.
X
Xchar ciline[8] - Insert a blank line. A blank line is inserted on the
Xline the cursor is on. If available, it can be used for ctopb, too.
X
Xchar ckline[8] - Kill a line. The line the cursor is on is deleted,
Xand the following text scrolled up.
X
Xchar cundlb[8], cundle[8] - TVX has the capability to optionally
Xsupport bold and underline for some text processors. For example, a
X^U can be used to toggle underscore. This is only useful for a text
Xformatter that can recognize such a sequence.
X
Xchar cboldb[8], char cbolde[8] - Similar to undlb, but boldface.
X
X
X*** Default settings
X
Xint ddline - default display line. This sets which line is the
Xdefault home display line. For scrolling versions (dscrl != 0), right
Xin the middle is a good place. For fixed cursor line versions,
Xsomething below the middle seems better (like 16 for 24 line
Xscreens).
X
Xint dscrl - default scroll lines. If this is non-zero, the cursor
Xwill move up and down lines on the screen with cursor movement
Xcommands. This requires a bit less screen update overhead, and is
Xbetter for slower time shared systems. If it is zero, the cursor will
Xremain fixed on ddline, and text will scroll on and off the screen as
Xneeded. Both these are resettable with the : command.
X
Xint dxcase - default search case. 0 means find is case insensitive, 1
Xmeans find must match exact case.
X
Xint usecz - MS-DOS versions only. If 1, TVX will put a Control-Z end
Xof file mark in the file (this is CP/M compatible). If 0, TVX uses
XMS-DOS end of file conventions.
X
Xint autoin - TRUE (1) if auto indent, FALSE (0) otherwise.
X
X
X
X -26-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
Xint logdef - Create backup log file by default? 0->no, 1-> yes.
X
Xchar wildch - The character used as a wild card in finds.
X
Xchar delkey - the delete character key, usually backspace.
X
Xint tvhardlines - number of physical lines on screen.
X
Xint tvlins - number of lines on virtual screen. Initially should be
Xsame value as tvhardlines.
X
Xint tvcols - number of columns on screen. If the terminal wraps new
Xtext to the next line rather than discarding characters after the last
Xcolumn, then tvcols must be set to 1 less than the true width of the
Xterminal.
X
Xint isibmpc - TRUE (1) if this version uses the custom IBM-PC screen
Xdriver. FALSE (0) if uses regular terminal output code.
X
Xchar synofr[20], char synoto[20] - These are used to map commands.
XThe synofr contains commands to be aliased to the corresponding
Xcommand in the synoto table. For example, the '[' and '{' keys are
Xoften reversed on some terminals. Making '[' in synofr a synonym to
X'{' in synoto will make the two commands the same.
X
Xchar funkey - If the terminal has function keys, they can be supported
Xby TVX by setting this variable to the first code sent by the function
Xkey, usually ESCAPE. TVX supports only two code sequences for
Xfunction keys.
X
Xchar funchar[50] - this is the second code sent by a function key.
X
Xchar funcmd[50] - this is the equivalent command a given function key
Xwill be mapped to. Similar to synofr and synoto.
X
X
X*** #define options
X
X The file 'tvx_defs.ic' has many #define statements that can be
Xused to customize TVX for particular installations. Ideally, the
Xsource for TVX should be maintained as one set, and differences
Xbetween versions handled by #defines. Most #defines are explained in
Xthe source code, but a few deserve a few extra comments, and are
Xsummarized below.
X
X#define VERSION " - TVX (7/1/85) - " - This defines the version of
XTVX. Any time a modification is made, the VERSION define should be
Xupdated.
X
X#define VB - whether or not to create backup log version or not. This
Xdoes NOT imply the file "backup.log" will be used automatically (see
Xvariable logdef), simply that the code is included.
X
X#define ULBD - If defined, TVX supports underline, bold in ^U, ^B
Xformat.
X
X
X
X -27-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X#define BACKUPNAME - This defines the name of the backup log file, if
Xused.
X
X#define BUFFLIMIT - This defines how much space is saved in the text
Xbuffer when reading in a file. This determines how much space is
Xreserved for saving text with the 'S' command, and how much is left
Xover for new inserts. Smaller values allow more text from the file to
Xbe read, larger values allow more text to be saved. The '-s' switch
Xat runtime increases this value.
X
X#define FILEREAD, #define FILEWRITE - These define the string used for
Xfile mode in the fopen() calls. Unix and MS-DOS versions are not
Xtypically exactly compatible, as most MS-DOS C's allow a different
Xmode to handle the CR/LF problem.
X
X#define FNAMESIZE - maximum length of file names.
X
X#define INT16 - If #defined, then the normal C int is 16 bits long.
XThis changes the way memory status is displayed.
X
X#define LINELIMIT - Like BUFFLIMIT, only number of lines. #define
XMAXBUFF - Defines maximum number of characters allocated to text
Xbuffer. Malloc() is used to get the space from the runtime system.
XIt is possible less than MAXBUFF will be available. The maximum
Xallowed for any given system must be less than the maximum value
Xrepresented by an unsigned int. If MAXBUFF is very large, there get
Xto be a noticeable initialization delay.
X
X#define MAXLINE - This determines the maximum number of lines
Xallocated per buffer. It is related to MAXBUFF.
X
X#define REPEATBUFS - defines how many repeat buffers are allocated.
XIf space is a problem, allocate fewer repeat buffers.
X
X#define USELF - This symbol should be defined if the terminal needs a
Xline feed character after each carriage return. Almost always true.
X
X#define FILELF - This symbol is defined if text files use a CR/LF
Xcombination. It causes a NEWLINE/LF to be written to files.
X
X#define NEWLINE - This defines the actual character used as a new line
Xin files. On CR/LF systems, it should be a CR (13). On systems like
XUnix with a single new line separator, it should be that character
X(LF).
X
X#define USECTRLZ - defined if the code for handling a Control-Z and
Xend of file mark should be used.
X
X#define NEEDTVLIB - define this if the standard C library provided
Xdoesn't have the routine in TVX_LIB.
X
X#define HELP - Define this if help should be supported. The help
Xroutine uses significant space, which can be saved if help isn't
Xcompiled in.
X
X#define CONFIGFILE - define this if support for the '-c' switch is
X
X
X -28-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
Xdesired.
X
X
X
X**** MS-DOS Notes ***
X
X TVX can be built as a generic MS-DOS version and as an IBM-PC
Xspecific version. The MS-DOS version uses the standard DOS character
Xoutput routines. Thus, it could use the ANSI.SYS driver, but it would
Xrun very slowly then. The IBM-PC version has a custom screen driver
Xthat calls the ROM BIOS directly, and is very fast. A special hand
Xoptimized version of the driver is also included in the source (valid
Xfor cii c-86 only!). The definitions for and IBMPC included in
X"tvx_term.ic" also define the keypad keys to work in a predictable
Xmanner.
X
X
X
X*** Unix Notes ***
X
X The usual Unix version will be the TERMCAP version. That version
Xworks very well, but is not in all cases optimal for a given
Xterminal. It might be desirable to build a specific version for the
Xterminal you use most often. Most notably, the TERMCAP version does
Xnot know about cursor shapes or other control sequences to distinguish
Xcommand mode from insert mode. Also, it sets tvcols to one less than
Xthe true value to avoid wrapping problems. The termcap version also
Xonly sends a bell for the error message.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -29-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** TVX File Usage ***
X
X TVX uses four logical files: the original file, the destination
Xfile, a work file, and the source file. The original file and the
Xdestination file are not touched until a normal exit from TVX.
X
X The source file is the current copy of the file providing text to
Xbe entered. When TVX is first started, the source file and the
Xoriginal file are the same. The work file is used to hold the edited
Xoutput file.
X
X When the '^B' file beginning command is issued, the remainder of
Xthe source input file is written to the work output file. The work
Xfile then becomes the new source file, and a new work file is
Xcreated. Thus, it is possible to have four copies of a file around:
XThe .BAK backup copy of the original file, the original copy of the
Xfile, the copy of the source file, and the (partially written) work
Xfile. Under normal operation, there will only be two copies: the
Xsource file (which is really the original file) and the possibly
Xpartially written work file. Only by using the '^B' commands can 3
Xcopies of the file exist.
X
X When you issue the normal '^X' exit command, the following
Xactions take place: Any old .BAK files are deleted. The original file
Xis renamed to be the new .BAK version. If the source file is
Xdifferent than the original file, it will be deleted. The work file
Xis then renamed to be the destination file. If you don't have write
Xaccess to the directory with the original file, then the original file
Xand the work file will not be renamed. A message to that effect will
Xbe printed. The normal operating system copy and rename commands can
Xbe used to recover the work file, which contains the edits made to
Xdate.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -30-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** Quick Reference Summary ***
X
X
X TVX Commands (n => count allowed)
X
X nA Append lines B Buffer beginning
X ^B File beginning nC Change chars
X nD Down line n^D Down column
X E Buffer end n^E Edit repeat buffer
X nF Find pattern ^F Find across buffs
X G Get save buffer ^G Unkill last line
X nH Half page nI Insert (till $)
X J Jump back nK Kill character
X n^K Kill line nL Left
X M Memory status nN Note location
X n^N Reset location nO Open blank line
X ^O Operating system nP Page
X ^P Print screen nR Right
X ^R Restore edited buffer nS Save lines
X nT Tidy (fill text) ^T Abort session
X nU Up n^U Up column
X V Verify n^W Write buff
X ^X Exit, end session n^Y Yank to(-n)/from(+n) file
X nBS Delete prev. char. n; Find again
X / Delete last thing = Change last thing
X ' Del to line beginning " Delete to line end
X , Line beginning . Line end
X nTAB Word right n{ Word left
X n<>$$ Repeat loop n& Repeat again
X n#k Execute repeat buffer k n times
X ? Help @ Invoke cmd file
X * Insert pattern found last
X $ Escape - end insert, find, repeat
X n:p Set parameter p
X
X
X Possible parameters:
X
X A - Autoindent (1=y,0=n) D - display line
X E - Expand tabs to n spaces F - find case (0=exact,1=any)
X M - Match wild cards O - set output file name
X S - scroll window R - repeat buffer to use
X T - tty mode U - define user wild card set
X V - virtual window W - autowrap width
X
X
X Usage: tvx filename [-b -i -l -o=f -r -s -t -w -# {-z -c=f}]
X
X -[no]b : backup file -[no]i : autoindent
X -[no]l : make command log file -t : tty mode
X -o=outputfile -r : read only
X -s : big save buff -[no]w : word processing mode
X -# : set virtual window lines to #
X
X On MS-DOS versions:
X -[no]z : use control-z for end of file
X
X
X -31-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X -c=configfile -c : use /bin/config.tvx
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X -32-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
X *** INDEX ***
X TVX Reference Manual
X
Xabort - 10
Xappend - 4, 10
Xauto wrap - 16
Xautoindent - 15
X
Xbackspace - 2, 12, 17, 18
Xbackup file - 3, 4, 10, 17
Xbeginning of file - 4, 6, 17
Xbuffer - 2, 4, 5, 6, 8, 9, 11
Xbuffer beginning - 4
X
Xchange - 4
Xcommands - 2, 4
Xcursor - 2
Xcursor character - 3
X
Xdefault source settings - 26
Xdefine options - 27
Xdelete last thing - 12
Xdelete line front - 13
Xdelete line tail - 13
Xdelete previous character - 12
Xdown - 4, 10
Xdown in column - 4
X
Xend buffer - 5
Xend session - 11
XError Messages - 20
Xescape - 3, 4, 5, 7, 17
Xexit - 11
Xexternal file - 12
X
Xfind - 5, 6, 12, 15
Xfind case - 15
X
Xget - 6
Xget killed line - 7
X
Xhalf page - 7
Xhome display line - 15
X
Xinsert - 7, 8
XInsert find pattern - 13
XInstallation - 24
XInstallation - MS-DOS - 29
XInstallation - Unix - 29
Xinvoke command file - 15
X
Xjump - 7
X
Xkill characters - 7
Xkill lines - 8
X
X
X
X -33-
X
X
X
X
XTVX Reference Manual 11/27/85
X
X
Xleft - 8
Xline beginning - 13
Xline end - 13
Xlog file - 3, 12, 15, 17
X
Xmemory - 8
Xmode - 3, 4, 7, 8, 12
X
Xnote - 8
X
Xopen line - 8
Xoperating system - 8
Xother control sequences - 25
Xoutput file - 15
X
Xpage - 7, 9
Xparameters - 15
Xprint - 9
X
XQuick Reference Summary - 31
Xquit - 4
X
Xrepeat buffer - 9
Xrepeat loop - 5, 13, 16
Xright - 9
X
Xsave buffer - 4, 7, 9, 12
Xscroll lines - 16
Xsearch - 5
Xskip over words - 13
Xsource code - 24
Xstarting up - 1
Xstatus - 8
Xswitches - 1
X
Xtab expansion - 15
Xterminate - 10
Xtidy - 10
Xtty mode - 16, 23
XTVX File Usage - 30
X
Xunkill - 7
Xup - 11
Xup in column - 11
Xuser customization - 19
X
Xverify - 11
Xvirtual window - 16
X
Xwild card - 6, 15
Xword - 13
Xwrite buffer - 11
X
XX-Y Cursor Addressing - 25
X
Xyank external file - 12
X
X
X -34-
X
X
X
X
SHAR_EOF
echo Now you can use 'cat tvx_refa.doc tvx_refb.doc > tvx_ref.doc' to combine.
echo ALL DONE!
exit 0
More information about the Comp.sources.unix
mailing list