MicroEmacs (7 of 7)

[Curt Jutzi]

*** REPLACE THIS LINE WITH YOUR MESSAGE ***

        if (status!=SS$_NORMAL || (iosb[0]&0xFFFF)!=SS$_NORMAL)
                exit(status);
#endif
#if     CPM
#endif
#if     MSDOS
#endif
#if     V7
        gtty(1, &ostate);                       /* save old state */
        gtty(1, &nstate);                       /* get base of new state */
        nstate.sg_flags |= RAW;
        nstate.sg_flags &= ~(ECHO|CRMOD);       /* no echo for now... */
        stty(1, &nstate);                       /* set mode */
#endif
}

/*
 * This function gets called just before we go back home to the command
 * interpreter. On VMS it puts the terminal back in a reasonable state.
 * Another no-operation on CPM.
 */
ttclose()
{
#if     AMIGA
        Close(terminal);
#endif
#if     VMS
        int     status;
        int     iosb[1];

        ttflush();
        status = SYS$QIOW(EFN, iochan, IO$_SETMODE, iosb, 0, 0,
                 oldmode, sizeof(oldmode), 0, 0, 0, 0);
        if (status!=SS$_NORMAL || (iosb[0]&0xFFFF)!=SS$_NORMAL)
                exit(status);
        status = SYS$DASSGN(iochan);
        if (status != SS$_NORMAL)
                exit(status);
#endif
#if     CPM
#endif
#if     MSDOS
#endif
#if     V7
        stty(1, &ostate);
#endif
}

/*
 * Write a character to the display. On VMS, terminal output is buffered, and
 * we just put the characters in the big array, after checking for overflow.
 * On CPM terminal I/O unbuffered, so we just write the byte out. Ditto on
 * MS-DOS (use the very very raw console output routine).
 */
ttputc(c)
#if     AMIGA
        char c;
#endif
{
#if     AMIGA
        Write(terminal, &c, LEN);
#endif
#if     VMS
        if (nobuf >= NOBUF)
                ttflush();
        obuf[nobuf++] = c;
#endif

#if     CPM
        bios(BCONOUT, c, 0);
#endif

#if     MSDOS & MWC86
        bdos(CONDIO, c, 0);
#endif

#if RAINBOW
        Put_Char(c);                    /* fast video */
#endif

#if     V7
        fputc(c, stdout);
#endif
}

/*
 * Flush terminal buffer. Does real work where the terminal output is buffered
 * up. A no-operation on systems where byte at a time terminal I/O is done.
 */
ttflush()
{
#if     AMIGA
#endif
#if     VMS
        int     status;
        int     iosb[2];

        status = SS$_NORMAL;
        if (nobuf != 0) {
                status = SYS$QIOW(EFN, iochan, IO$_WRITELBLK|IO$M_NOFORMAT,
                         iosb, 0, 0, obuf, nobuf, 0, 0, 0, 0);
                if (status == SS$_NORMAL)
                        status = iosb[0] & 0xFFFF;
                nobuf = 0;
        }
        return (status);
#endif
#if     CPM
#endif
#if     MSDOS
#endif
#if     V7
        fflush(stdout);
#endif
}

/*
 * Read a character from the terminal, performing no editing and doing no echo
 * at all. More complex in VMS that almost anyplace else, which figures. Very
 * simple on CPM, because the system can do exactly what you want.
 */
ttgetc()
{
#if     AMIGA
        char ch;

        Read(terminal, &ch, LEN);
        return (int) ch;
#endif
#if     VMS
        int     status;
        int     iosb[2];
        int     term[2];

        while (ibufi >= nibuf) {
                ibufi = 0;
                term[0] = 0;
                term[1] = 0;
                status = SYS$QIOW(EFN, iochan, IO$_READLBLK|IO$M_TIMED,
                         iosb, 0, 0, ibuf, NIBUF, 0, term, 0, 0);
                if (status != SS$_NORMAL)
                        exit(status);
                status = iosb[0] & 0xFFFF;
                if (status!=SS$_NORMAL && status!=SS$_TIMEOUT)
                        exit(status);
                nibuf = (iosb[0]>>16) + (iosb[1]>>16);
                if (nibuf == 0) {
                        status = SYS$QIOW(EFN, iochan, IO$_READLBLK,
                                 iosb, 0, 0, ibuf, 1, 0, term, 0, 0);
                        if (status != SS$_NORMAL
                        || (status = (iosb[0]&0xFFFF)) != SS$_NORMAL)
                                exit(status);
                        nibuf = (iosb[0]>>16) + (iosb[1]>>16);
                }
        }
        return (ibuf[ibufi++] & 0xFF);          /* Allow multinational  */
#endif

#if     CPM
        return (biosb(BCONIN, 0, 0));
#endif

#if RAINBOW
        int Ch;

        while ((Ch = Read_Keyboard()) < 0);

        if ((Ch & Function_Key) == 0)
                if (!((Ch & 0xFF) == 015 || (Ch & 0xFF) == 0177))
                        Ch &= 0xFF;

        return Ch;
#endif

#if     MSDOS & MWC86
        return (bdos(CONRAW, 0, 0)&0x07F);
#endif

#if     V7
        return(fgetc(stdin));
#endif
}