v08i044: xlife 2.0, Part08/08
Daniel Edward Lovinger
dl2n+ at andrew.cmu.edu
Sun Jul 8 03:05:38 AEST 1990
Submitted-by: Daniel Edward Lovinger <dl2n+ at andrew.cmu.edu>
Posting-number: Volume 8, Issue 44
Archive-name: xlife/part08
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of archive 8 (of 8)."
# Contents: xlife-2.0/patterns/12gliders.life
# xlife-2.0/patterns/acorn.life xlife-2.0/patterns/barberpole.life
# xlife-2.0/patterns/benchmark.life
# xlife-2.0/patterns/bheptomino.life
# xlife-2.0/patterns/blinkership2.life
# xlife-2.0/patterns/boatcap.life xlife-2.0/patterns/bunnies.life
# xlife-2.0/patterns/cheshirecat.life
# xlife-2.0/patterns/clappinghands.life
# xlife-2.0/patterns/clock.life xlife-2.0/patterns/collapsecap.life
# xlife-2.0/patterns/cross.life xlife-2.0/patterns/diagfuse.life
# xlife-2.0/patterns/eaters3.life xlife-2.0/patterns/fencepost.life
# xlife-2.0/patterns/figure8.life xlife-2.0/patterns/fisheater.life
# xlife-2.0/patterns/flasher.life xlife-2.0/patterns/flywheel.life
# xlife-2.0/patterns/gear.life xlife-2.0/patterns/glider.life
# xlife-2.0/patterns/glidergen1.life
# xlife-2.0/patterns/glidergen2.life
# xlife-2.0/patterns/glidergen3.life
# xlife-2.0/patterns/glidergen4.life
# xlife-2.0/patterns/glidergen5.life
# xlife-2.0/patterns/glidergen6.life
# xlife-2.0/patterns/glidergen7.life
# xlife-2.0/patterns/glidertofish.life xlife-2.0/patterns/j.life
# xlife-2.0/patterns/kickback.life
# xlife-2.0/patterns/lambdabomb.life
# xlife-2.0/patterns/largefish.life
# xlife-2.0/patterns/mediumfish.life
# xlife-2.0/patterns/morejunk.life
# xlife-2.0/patterns/oscillator1.life
# xlife-2.0/patterns/oscillator2.life
# xlife-2.0/patterns/oscillator3.life
# xlife-2.0/patterns/pentadecathlon.life
# xlife-2.0/patterns/piecollection.life
# xlife-2.0/patterns/piston.life xlife-2.0/patterns/puffertrain.life
# xlife-2.0/patterns/pulsar18-22-20.life
# xlife-2.0/patterns/pulsar48-56-72.life
# xlife-2.0/patterns/pulse.life xlife-2.0/patterns/pulse1.life
# xlife-2.0/patterns/pulse2.life xlife-2.0/patterns/pump.life
# xlife-2.0/patterns/r.life xlife-2.0/patterns/rabbit.life
# xlife-2.0/patterns/rpentomino.life xlife-2.0/patterns/sglider.life
# xlife-2.0/patterns/shiningflower.life
# xlife-2.0/patterns/skyline.life xlife-2.0/patterns/smallfish.life
# xlife-2.0/patterns/somejunk.life xlife-2.0/patterns/spark.life
# xlife-2.0/patterns/spark2.life
# xlife-2.0/patterns/squareblinker.life
# xlife-2.0/patterns/squarecap.life
# xlife-2.0/patterns/squaredance.life
# xlife-2.0/patterns/switchengine.life
# xlife-2.0/patterns/testtubebaby.life
# xlife-2.0/patterns/thunderbird.life
# xlife-2.0/patterns/turbine8.life
# Wrapped by dl2n at niobe.weh.andrew.cmu.edu on Mon Jul 2 22:48:18 1990
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f xlife-2.0/patterns/12gliders.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/12gliders.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/12gliders.life\" \(59 characters\)
sed "s/^X//" >xlife-2.0/patterns/12gliders.life <<'END_OF_xlife-2.0/patterns/12gliders.life'
X#P -4 -2
X..**.**..
X.*.*.*.*.
X*..*.*..*
X.*.*.*.*.
X..**.**..
END_OF_xlife-2.0/patterns/12gliders.life
if test 59 -ne `wc -c <xlife-2.0/patterns/12gliders.life`; then
echo shar: \"xlife-2.0/patterns/12gliders.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/acorn.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/acorn.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/acorn.life\" \(33 characters\)
sed "s/^X//" >xlife-2.0/patterns/acorn.life <<'END_OF_xlife-2.0/patterns/acorn.life'
X#P -3 -1
X.*.....
X...*...
X**..***
END_OF_xlife-2.0/patterns/acorn.life
if test 33 -ne `wc -c <xlife-2.0/patterns/acorn.life`; then
echo shar: \"xlife-2.0/patterns/acorn.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/barberpole.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/barberpole.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/barberpole.life\" \(131 characters\)
sed "s/^X//" >xlife-2.0/patterns/barberpole.life <<'END_OF_xlife-2.0/patterns/barberpole.life'
X#R
X -6 -6
X -5 -6
X -6 -5
X -4 -5
X -4 -3
X -2 -3
X -2 -1
X 0 -1
X 0 1
X 2 1
X 2 3
X 4 3
X 4 5
X 6 5
X 5 6
X 6 6
END_OF_xlife-2.0/patterns/barberpole.life
if test 131 -ne `wc -c <xlife-2.0/patterns/barberpole.life`; then
echo shar: \"xlife-2.0/patterns/barberpole.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/benchmark.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/benchmark.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/benchmark.life\" \(25 characters\)
sed "s/^X//" >xlife-2.0/patterns/benchmark.life <<'END_OF_xlife-2.0/patterns/benchmark.life'
X#P -1 -1
X**.
X.*.
X.*.
X.**
END_OF_xlife-2.0/patterns/benchmark.life
if test 25 -ne `wc -c <xlife-2.0/patterns/benchmark.life`; then
echo shar: \"xlife-2.0/patterns/benchmark.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/bheptomino.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/bheptomino.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/bheptomino.life\" \(24 characters\)
sed "s/^X//" >xlife-2.0/patterns/bheptomino.life <<'END_OF_xlife-2.0/patterns/bheptomino.life'
X#P -1 -1
X.*..
X***.
X*.**
END_OF_xlife-2.0/patterns/bheptomino.life
if test 24 -ne `wc -c <xlife-2.0/patterns/bheptomino.life`; then
echo shar: \"xlife-2.0/patterns/bheptomino.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/blinkership2.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/blinkership2.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/blinkership2.life\" \(99 characters\)
sed "s/^X//" >xlife-2.0/patterns/blinkership2.life <<'END_OF_xlife-2.0/patterns/blinkership2.life'
X#P -4 -4
X.....****
X....*...*
X........*
X**..*..*.
X***......
X**..*..*.
X........*
X....*...*
X.....****
END_OF_xlife-2.0/patterns/blinkership2.life
if test 99 -ne `wc -c <xlife-2.0/patterns/blinkership2.life`; then
echo shar: \"xlife-2.0/patterns/blinkership2.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/boatcap.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/boatcap.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/boatcap.life\" \(147 characters\)
sed "s/^X//" >xlife-2.0/patterns/boatcap.life <<'END_OF_xlife-2.0/patterns/boatcap.life'
X#R
X -7 -6
X -6 -5
X -5 -4
X -4 -3
X -3 -2
X -2 -1
X -1 0
X 0 1
X 1 2
X 2 3
X 3 4
X 4 5
X 7 5
X 8 5
X 5 6
X 8 6
X 6 7
X 7 7
END_OF_xlife-2.0/patterns/boatcap.life
if test 147 -ne `wc -c <xlife-2.0/patterns/boatcap.life`; then
echo shar: \"xlife-2.0/patterns/boatcap.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/bunnies.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/bunnies.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/bunnies.life\" \(36 characters\)
sed "s/^X//" >xlife-2.0/patterns/bunnies.life <<'END_OF_xlife-2.0/patterns/bunnies.life'
X*.....*.
X..*...*.
X..*..*.*
X.*.*....
END_OF_xlife-2.0/patterns/bunnies.life
if test 36 -ne `wc -c <xlife-2.0/patterns/bunnies.life`; then
echo shar: \"xlife-2.0/patterns/bunnies.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/cheshirecat.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/cheshirecat.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/cheshirecat.life\" \(51 characters\)
sed "s/^X//" >xlife-2.0/patterns/cheshirecat.life <<'END_OF_xlife-2.0/patterns/cheshirecat.life'
X#P -2 -2
X.*..*.
X.****.
X*....*
X*.**.*
X*....*
X.****.
END_OF_xlife-2.0/patterns/cheshirecat.life
if test 51 -ne `wc -c <xlife-2.0/patterns/cheshirecat.life`; then
echo shar: \"xlife-2.0/patterns/cheshirecat.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/clappinghands.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/clappinghands.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/clappinghands.life\" \(20 characters\)
sed "s/^X//" >xlife-2.0/patterns/clappinghands.life <<'END_OF_xlife-2.0/patterns/clappinghands.life'
X#P 0 -1
X*.
X**
X**
X.*
END_OF_xlife-2.0/patterns/clappinghands.life
if test 20 -ne `wc -c <xlife-2.0/patterns/clappinghands.life`; then
echo shar: \"xlife-2.0/patterns/clappinghands.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/clock.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/clock.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/clock.life\" \(165 characters\)
sed "s/^X//" >xlife-2.0/patterns/clock.life <<'END_OF_xlife-2.0/patterns/clock.life'
X#P -5 -5
X....**......
X....**......
X............
X....****....
X**.*..*.*...
X**.*.*..*...
X...*.*..*.**
X...*....*.**
X....****....
X............
X......**....
X......**....
END_OF_xlife-2.0/patterns/clock.life
if test 165 -ne `wc -c <xlife-2.0/patterns/clock.life`; then
echo shar: \"xlife-2.0/patterns/clock.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/collapsecap.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/collapsecap.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/collapsecap.life\" \(147 characters\)
sed "s/^X//" >xlife-2.0/patterns/collapsecap.life <<'END_OF_xlife-2.0/patterns/collapsecap.life'
X#R
X -7 -6
X -6 -5
X -5 -4
X -4 -3
X -3 -2
X -2 -1
X -1 0
X 0 1
X 1 2
X 2 3
X 3 4
X 7 4
X 8 4
X 4 5
X 7 5
X 5 6
X 7 6
X 6 7
END_OF_xlife-2.0/patterns/collapsecap.life
if test 147 -ne `wc -c <xlife-2.0/patterns/collapsecap.life`; then
echo shar: \"xlife-2.0/patterns/collapsecap.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/cross.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/cross.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/cross.life\" \(81 characters\)
sed "s/^X//" >xlife-2.0/patterns/cross.life <<'END_OF_xlife-2.0/patterns/cross.life'
X#P -3 -3
X..****..
X..*..*..
X***..***
X*......*
X*......*
X***..***
X..*..*..
X..****..
END_OF_xlife-2.0/patterns/cross.life
if test 81 -ne `wc -c <xlife-2.0/patterns/cross.life`; then
echo shar: \"xlife-2.0/patterns/cross.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/diagfuse.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/diagfuse.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/diagfuse.life\" \(131 characters\)
sed "s/^X//" >xlife-2.0/patterns/diagfuse.life <<'END_OF_xlife-2.0/patterns/diagfuse.life'
X#R
X -7 -7
X -6 -6
X -5 -5
X -4 -4
X -3 -3
X -2 -2
X -1 -1
X 0 0
X 1 1
X 2 2
X 3 3
X 4 4
X 5 5
X 6 6
X 7 7
X 8 8
END_OF_xlife-2.0/patterns/diagfuse.life
if test 131 -ne `wc -c <xlife-2.0/patterns/diagfuse.life`; then
echo shar: \"xlife-2.0/patterns/diagfuse.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/eaters3.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/eaters3.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/eaters3.life\" \(90 characters\)
sed "s/^X//" >xlife-2.0/patterns/eaters3.life <<'END_OF_xlife-2.0/patterns/eaters3.life'
X#P -3 -4
X.......*
X.....***
X....*...
X....**..
X........
X..**....
X...*....
X***.....
X*.......
END_OF_xlife-2.0/patterns/eaters3.life
if test 90 -ne `wc -c <xlife-2.0/patterns/eaters3.life`; then
echo shar: \"xlife-2.0/patterns/eaters3.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/fencepost.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/fencepost.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/fencepost.life\" \(168 characters\)
sed "s/^X//" >xlife-2.0/patterns/fencepost.life <<'END_OF_xlife-2.0/patterns/fencepost.life'
X*.*.*..................
X*.*.*...........***.***
X*...*...*...*......*...
X.*.*....***.*...**...**
X*...*...*...*......*...
X*.*.*...........***.***
X*.*.*..................
END_OF_xlife-2.0/patterns/fencepost.life
if test 168 -ne `wc -c <xlife-2.0/patterns/fencepost.life`; then
echo shar: \"xlife-2.0/patterns/fencepost.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/figure8.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/figure8.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/figure8.life\" \(51 characters\)
sed "s/^X//" >xlife-2.0/patterns/figure8.life <<'END_OF_xlife-2.0/patterns/figure8.life'
X#P -2 -2
X***...
X***...
X***...
X...***
X...***
X...***
END_OF_xlife-2.0/patterns/figure8.life
if test 51 -ne `wc -c <xlife-2.0/patterns/figure8.life`; then
echo shar: \"xlife-2.0/patterns/figure8.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/fisheater.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/fisheater.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/fisheater.life\" \(123 characters\)
sed "s/^X//" >xlife-2.0/patterns/fisheater.life <<'END_OF_xlife-2.0/patterns/fisheater.life'
X#R
X 2 -8
X 3 -7
X 3 -6
X 0 -5
X 3 -5
X 1 -4
X 2 -4
X 3 -4
X -1 6
X 0 6
X 0 7
X -3 8
X -2 8
X -1 8
X -3 9
END_OF_xlife-2.0/patterns/fisheater.life
if test 123 -ne `wc -c <xlife-2.0/patterns/fisheater.life`; then
echo shar: \"xlife-2.0/patterns/fisheater.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/flasher.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/flasher.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/flasher.life\" \(14 characters\)
sed "s/^X//" >xlife-2.0/patterns/flasher.life <<'END_OF_xlife-2.0/patterns/flasher.life'
X#P 0 -1
X*
X*
X*
END_OF_xlife-2.0/patterns/flasher.life
if test 14 -ne `wc -c <xlife-2.0/patterns/flasher.life`; then
echo shar: \"xlife-2.0/patterns/flasher.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/flywheel.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/flywheel.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/flywheel.life\" \(29 characters\)
sed "s/^X//" >xlife-2.0/patterns/flywheel.life <<'END_OF_xlife-2.0/patterns/flywheel.life'
X#P -1 -1
X.*..
X.*.*
X*.*.
X..*.
END_OF_xlife-2.0/patterns/flywheel.life
if test 29 -ne `wc -c <xlife-2.0/patterns/flywheel.life`; then
echo shar: \"xlife-2.0/patterns/flywheel.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/gear.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/gear.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/gear.life\" \(81 characters\)
sed "s/^X//" >xlife-2.0/patterns/gear.life <<'END_OF_xlife-2.0/patterns/gear.life'
X#P -3 -3
X...*....
X...*.*..
X.*......
X......**
X**......
X......*.
X..*.*...
X....*...
END_OF_xlife-2.0/patterns/gear.life
if test 81 -ne `wc -c <xlife-2.0/patterns/gear.life`; then
echo shar: \"xlife-2.0/patterns/gear.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glider.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glider.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glider.life\" \(21 characters\)
sed "s/^X//" >xlife-2.0/patterns/glider.life <<'END_OF_xlife-2.0/patterns/glider.life'
X#P -1 -1
X..*
X*.*
X.**
END_OF_xlife-2.0/patterns/glider.life
if test 21 -ne `wc -c <xlife-2.0/patterns/glider.life`; then
echo shar: \"xlife-2.0/patterns/glider.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen1.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen1.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen1.life\" \(23 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen1.life <<'END_OF_xlife-2.0/patterns/glidergen1.life'
X#P 0 -2
X**
X*.
X**
X*.
X*.
END_OF_xlife-2.0/patterns/glidergen1.life
if test 23 -ne `wc -c <xlife-2.0/patterns/glidergen1.life`; then
echo shar: \"xlife-2.0/patterns/glidergen1.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen2.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen2.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen2.life\" \(99 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen2.life <<'END_OF_xlife-2.0/patterns/glidergen2.life'
X#P -4 -4
X....*****
X.........
X....*....
X....*....
X....*....
X....*....
X....*....
X.........
X*****....
END_OF_xlife-2.0/patterns/glidergen2.life
if test 99 -ne `wc -c <xlife-2.0/patterns/glidergen2.life`; then
echo shar: \"xlife-2.0/patterns/glidergen2.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen3.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen3.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen3.life\" \(39 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen3.life <<'END_OF_xlife-2.0/patterns/glidergen3.life'
X#P -4 -1
X*........
X*********
X...*.....
END_OF_xlife-2.0/patterns/glidergen3.life
if test 39 -ne `wc -c <xlife-2.0/patterns/glidergen3.life`; then
echo shar: \"xlife-2.0/patterns/glidergen3.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen4.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen4.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen4.life\" \(39 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen4.life <<'END_OF_xlife-2.0/patterns/glidergen4.life'
X#P -2 -2
X*****
X...*.
X..*..
X.*...
X*****
END_OF_xlife-2.0/patterns/glidergen4.life
if test 39 -ne `wc -c <xlife-2.0/patterns/glidergen4.life`; then
echo shar: \"xlife-2.0/patterns/glidergen4.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen5.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen5.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen5.life\" \(117 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen5.life <<'END_OF_xlife-2.0/patterns/glidergen5.life'
X#P -5 -4
X....****...
X...........
X..********.
X...........
X***********
X...........
X..********.
X...........
X....****...
END_OF_xlife-2.0/patterns/glidergen5.life
if test 117 -ne `wc -c <xlife-2.0/patterns/glidergen5.life`; then
echo shar: \"xlife-2.0/patterns/glidergen5.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen6.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen6.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen6.life\" \(29 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen6.life <<'END_OF_xlife-2.0/patterns/glidergen6.life'
X#P 0 -3
X**
X*.
X**
X*.
X**
X**
X*.
END_OF_xlife-2.0/patterns/glidergen6.life
if test 29 -ne `wc -c <xlife-2.0/patterns/glidergen6.life`; then
echo shar: \"xlife-2.0/patterns/glidergen6.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidergen7.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidergen7.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidergen7.life\" \(39 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidergen7.life <<'END_OF_xlife-2.0/patterns/glidergen7.life'
X#P -14 0
X*****.*****.*****.*****.*****
END_OF_xlife-2.0/patterns/glidergen7.life
if test 39 -ne `wc -c <xlife-2.0/patterns/glidergen7.life`; then
echo shar: \"xlife-2.0/patterns/glidergen7.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/glidertofish.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/glidertofish.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/glidertofish.life\" \(123 characters\)
sed "s/^X//" >xlife-2.0/patterns/glidertofish.life <<'END_OF_xlife-2.0/patterns/glidertofish.life'
X#R
X -5 -4
X -7 -3
X -5 -3
X -6 -2
X -5 -2
X -3 3
X -2 3
X 7 3
X -4 4
X -2 4
X 6 4
X 7 4
X -2 5
X 6 5
X 8 5
END_OF_xlife-2.0/patterns/glidertofish.life
if test 123 -ne `wc -c <xlife-2.0/patterns/glidertofish.life`; then
echo shar: \"xlife-2.0/patterns/glidertofish.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/j.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/j.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/j.life\" \(21 characters\)
sed "s/^X//" >xlife-2.0/patterns/j.life <<'END_OF_xlife-2.0/patterns/j.life'
X#P -1 -1
X***
X.*.
X*..
END_OF_xlife-2.0/patterns/j.life
if test 21 -ne `wc -c <xlife-2.0/patterns/j.life`; then
echo shar: \"xlife-2.0/patterns/j.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/kickback.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/kickback.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/kickback.life\" \(44 characters\)
sed "s/^X//" >xlife-2.0/patterns/kickback.life <<'END_OF_xlife-2.0/patterns/kickback.life'
X#P -1 -3
X.*..
X.*.*
X.**.
X....
X*...
X.**.
X**..
END_OF_xlife-2.0/patterns/kickback.life
if test 44 -ne `wc -c <xlife-2.0/patterns/kickback.life`; then
echo shar: \"xlife-2.0/patterns/kickback.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/lambdabomb.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/lambdabomb.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/lambdabomb.life\" \(18 characters\)
sed "s/^X//" >xlife-2.0/patterns/lambdabomb.life <<'END_OF_xlife-2.0/patterns/lambdabomb.life'
X#P -1 0
X.***
X*..*
END_OF_xlife-2.0/patterns/lambdabomb.life
if test 18 -ne `wc -c <xlife-2.0/patterns/lambdabomb.life`; then
echo shar: \"xlife-2.0/patterns/lambdabomb.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/largefish.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/largefish.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/largefish.life\" \(41 characters\)
sed "s/^X//" >xlife-2.0/patterns/largefish.life <<'END_OF_xlife-2.0/patterns/largefish.life'
X#P -3 -1
X******.
X*.....*
X*......
X.*.....
END_OF_xlife-2.0/patterns/largefish.life
if test 41 -ne `wc -c <xlife-2.0/patterns/largefish.life`; then
echo shar: \"xlife-2.0/patterns/largefish.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/mediumfish.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/mediumfish.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/mediumfish.life\" \(37 characters\)
sed "s/^X//" >xlife-2.0/patterns/mediumfish.life <<'END_OF_xlife-2.0/patterns/mediumfish.life'
X#P -2 -1
X*****.
X*....*
X*.....
X.*....
END_OF_xlife-2.0/patterns/mediumfish.life
if test 37 -ne `wc -c <xlife-2.0/patterns/mediumfish.life`; then
echo shar: \"xlife-2.0/patterns/mediumfish.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/morejunk.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/morejunk.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/morejunk.life\" \(37 characters\)
sed "s/^X//" >xlife-2.0/patterns/morejunk.life <<'END_OF_xlife-2.0/patterns/morejunk.life'
X#P -1 -3
X*..
X***
X*.*
X*..
X*..
X*..
X.**
END_OF_xlife-2.0/patterns/morejunk.life
if test 37 -ne `wc -c <xlife-2.0/patterns/morejunk.life`; then
echo shar: \"xlife-2.0/patterns/morejunk.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/oscillator1.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/oscillator1.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/oscillator1.life\" \(39 characters\)
sed "s/^X//" >xlife-2.0/patterns/oscillator1.life <<'END_OF_xlife-2.0/patterns/oscillator1.life'
X#P -2 -2
X**...
X*.*..
X.....
X..*.*
X...**
END_OF_xlife-2.0/patterns/oscillator1.life
if test 39 -ne `wc -c <xlife-2.0/patterns/oscillator1.life`; then
echo shar: \"xlife-2.0/patterns/oscillator1.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/oscillator2.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/oscillator2.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/oscillator2.life\" \(65 characters\)
sed "s/^X//" >xlife-2.0/patterns/oscillator2.life <<'END_OF_xlife-2.0/patterns/oscillator2.life'
X#P -3 -3
X....***
X**.....
X*.*.**.
X.......
X..*.*..
X.*.....
X.**....
END_OF_xlife-2.0/patterns/oscillator2.life
if test 65 -ne `wc -c <xlife-2.0/patterns/oscillator2.life`; then
echo shar: \"xlife-2.0/patterns/oscillator2.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/oscillator3.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/oscillator3.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/oscillator3.life\" \(58 characters\)
sed "s/^X//" >xlife-2.0/patterns/oscillator3.life <<'END_OF_xlife-2.0/patterns/oscillator3.life'
X#P -2 -3
X..*...
X..*.*.
X*.....
X.*****
X*.....
X..*.*.
X..*...
END_OF_xlife-2.0/patterns/oscillator3.life
if test 58 -ne `wc -c <xlife-2.0/patterns/oscillator3.life`; then
echo shar: \"xlife-2.0/patterns/oscillator3.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pentadecathlon.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pentadecathlon.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pentadecathlon.life\" \(19 characters\)
sed "s/^X//" >xlife-2.0/patterns/pentadecathlon.life <<'END_OF_xlife-2.0/patterns/pentadecathlon.life'
X#P -4 0
X**********
END_OF_xlife-2.0/patterns/pentadecathlon.life
if test 19 -ne `wc -c <xlife-2.0/patterns/pentadecathlon.life`; then
echo shar: \"xlife-2.0/patterns/pentadecathlon.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/piecollection.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/piecollection.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/piecollection.life\" \(129 characters\)
sed "s/^X//" >xlife-2.0/patterns/piecollection.life <<'END_OF_xlife-2.0/patterns/piecollection.life'
X#P -5 -4
X........**.
X.**.....*.*
X*.*..**.*.*
X*.*.*.*.**.
X.**.*.*....
X.....**....
X...........
X.....****..
X.....*..*..
X......**...
END_OF_xlife-2.0/patterns/piecollection.life
if test 129 -ne `wc -c <xlife-2.0/patterns/piecollection.life`; then
echo shar: \"xlife-2.0/patterns/piecollection.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/piston.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/piston.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/piston.life\" \(171 characters\)
sed "s/^X//" >xlife-2.0/patterns/piston.life <<'END_OF_xlife-2.0/patterns/piston.life'
X#P -10 -3
X..........*...........
X..........****........
X**.........****.......
X**.........*..*.....**
X...........****.....**
X..........****........
X..........*...........
END_OF_xlife-2.0/patterns/piston.life
if test 171 -ne `wc -c <xlife-2.0/patterns/piston.life`; then
echo shar: \"xlife-2.0/patterns/piston.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/puffertrain.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/puffertrain.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/puffertrain.life\" \(117 characters\)
sed "s/^X//" >xlife-2.0/patterns/puffertrain.life <<'END_OF_xlife-2.0/patterns/puffertrain.life'
X#P -2 -8
X...*.
X....*
X*...*
X.****
X.....
X.....
X.....
X*....
X.**..
X..*..
X..*..
X.*...
X.....
X.....
X*..*.
X....*
X*...*
X.****
END_OF_xlife-2.0/patterns/puffertrain.life
if test 117 -ne `wc -c <xlife-2.0/patterns/puffertrain.life`; then
echo shar: \"xlife-2.0/patterns/puffertrain.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pulsar18-22-20.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pulsar18-22-20.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pulsar18-22-20.life\" \(90 characters\)
sed "s/^X//" >xlife-2.0/patterns/pulsar18-22-20.life <<'END_OF_xlife-2.0/patterns/pulsar18-22-20.life'
X....***..
X.........
X...*....*
X..*.*...*
X***..*..*
X......*..
X....**...
X....*....
X....*....
END_OF_xlife-2.0/patterns/pulsar18-22-20.life
if test 90 -ne `wc -c <xlife-2.0/patterns/pulsar18-22-20.life`; then
echo shar: \"xlife-2.0/patterns/pulsar18-22-20.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pulsar48-56-72.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pulsar48-56-72.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pulsar48-56-72.life\" \(27 characters\)
sed "s/^X//" >xlife-2.0/patterns/pulsar48-56-72.life <<'END_OF_xlife-2.0/patterns/pulsar48-56-72.life'
X#P -2 -1
X*...*
X*.*.*
X*...*
END_OF_xlife-2.0/patterns/pulsar48-56-72.life
if test 27 -ne `wc -c <xlife-2.0/patterns/pulsar48-56-72.life`; then
echo shar: \"xlife-2.0/patterns/pulsar48-56-72.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pulse.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pulse.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pulse.life\" \(72 characters\)
sed "s/^X//" >xlife-2.0/patterns/pulse.life <<'END_OF_xlife-2.0/patterns/pulse.life'
X...***..
X........
X..*....*
X.*.*...*
X.*..*..*
X**...*..
X..***...
X..*.....
END_OF_xlife-2.0/patterns/pulse.life
if test 72 -ne `wc -c <xlife-2.0/patterns/pulse.life`; then
echo shar: \"xlife-2.0/patterns/pulse.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pulse1.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pulse1.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pulse1.life\" \(65 characters\)
sed "s/^X//" >xlife-2.0/patterns/pulse1.life <<'END_OF_xlife-2.0/patterns/pulse1.life'
X#P -3 -3
X..*....
X.*.*...
X.......
X**...*.
X*.....*
X...*.*.
X..**...
END_OF_xlife-2.0/patterns/pulse1.life
if test 65 -ne `wc -c <xlife-2.0/patterns/pulse1.life`; then
echo shar: \"xlife-2.0/patterns/pulse1.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pulse2.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pulse2.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pulse2.life\" \(81 characters\)
sed "s/^X//" >xlife-2.0/patterns/pulse2.life <<'END_OF_xlife-2.0/patterns/pulse2.life'
X#P -3 -3
X.**.....
X.**.....
X........
X........
X***.....
X**.*..**
X..**..**
X..**....
END_OF_xlife-2.0/patterns/pulse2.life
if test 81 -ne `wc -c <xlife-2.0/patterns/pulse2.life`; then
echo shar: \"xlife-2.0/patterns/pulse2.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/pump.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/pump.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/pump.life\" \(57 characters\)
sed "s/^X//" >xlife-2.0/patterns/pump.life <<'END_OF_xlife-2.0/patterns/pump.life'
X#P -3 -2
X.**.**.
X.**.**.
X..*.*..
X*.*.*.*
X*.*.*.*
X**...**
END_OF_xlife-2.0/patterns/pump.life
if test 57 -ne `wc -c <xlife-2.0/patterns/pump.life`; then
echo shar: \"xlife-2.0/patterns/pump.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/r.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/r.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/r.life\" \(33 characters\)
sed "s/^X//" >xlife-2.0/patterns/r.life <<'END_OF_xlife-2.0/patterns/r.life'
X#P -2 -1
X..**.
X.*..*
X.*.*.
X**.**
END_OF_xlife-2.0/patterns/r.life
if test 33 -ne `wc -c <xlife-2.0/patterns/r.life`; then
echo shar: \"xlife-2.0/patterns/r.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/rabbit.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/rabbit.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/rabbit.life\" \(33 characters\)
sed "s/^X//" >xlife-2.0/patterns/rabbit.life <<'END_OF_xlife-2.0/patterns/rabbit.life'
X#P -3 -1
X*...***
X***..*.
X.*.....
END_OF_xlife-2.0/patterns/rabbit.life
if test 33 -ne `wc -c <xlife-2.0/patterns/rabbit.life`; then
echo shar: \"xlife-2.0/patterns/rabbit.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/rpentomino.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/rpentomino.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/rpentomino.life\" \(21 characters\)
sed "s/^X//" >xlife-2.0/patterns/rpentomino.life <<'END_OF_xlife-2.0/patterns/rpentomino.life'
X#P -1 -1
X.**
X**.
X.*.
END_OF_xlife-2.0/patterns/rpentomino.life
if test 21 -ne `wc -c <xlife-2.0/patterns/rpentomino.life`; then
echo shar: \"xlife-2.0/patterns/rpentomino.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/sglider.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/sglider.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/sglider.life\" \(57 characters\)
sed "s/^X//" >xlife-2.0/patterns/sglider.life <<'END_OF_xlife-2.0/patterns/sglider.life'
X#P -2 -3
X...**
X..*.*
X...*.
X.....
X.....
X***..
X*.*..
X*.*..
END_OF_xlife-2.0/patterns/sglider.life
if test 57 -ne `wc -c <xlife-2.0/patterns/sglider.life`; then
echo shar: \"xlife-2.0/patterns/sglider.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/shiningflower.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/shiningflower.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/shiningflower.life\" \(51 characters\)
sed "s/^X//" >xlife-2.0/patterns/shiningflower.life <<'END_OF_xlife-2.0/patterns/shiningflower.life'
X#P -2 -2
X.*..*.
X*.**.*
X.*..*.
X.*..*.
X*.**.*
X.*..*.
END_OF_xlife-2.0/patterns/shiningflower.life
if test 51 -ne `wc -c <xlife-2.0/patterns/shiningflower.life`; then
echo shar: \"xlife-2.0/patterns/shiningflower.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/skyline.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/skyline.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/skyline.life\" \(89 characters\)
sed "s/^X//" >xlife-2.0/patterns/skyline.life <<'END_OF_xlife-2.0/patterns/skyline.life'
X#P -7 -2
X........**.....
X*.*.....*.*.*..
X**.*.**.*.**.*.
X...*.*.*.....*.
X...**........**
END_OF_xlife-2.0/patterns/skyline.life
if test 89 -ne `wc -c <xlife-2.0/patterns/skyline.life`; then
echo shar: \"xlife-2.0/patterns/skyline.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/smallfish.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/smallfish.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/smallfish.life\" \(33 characters\)
sed "s/^X//" >xlife-2.0/patterns/smallfish.life <<'END_OF_xlife-2.0/patterns/smallfish.life'
X#P -2 -1
X****.
X*...*
X*....
X.*..*
END_OF_xlife-2.0/patterns/smallfish.life
if test 33 -ne `wc -c <xlife-2.0/patterns/smallfish.life`; then
echo shar: \"xlife-2.0/patterns/smallfish.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/somejunk.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/somejunk.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/somejunk.life\" \(51 characters\)
sed "s/^X//" >xlife-2.0/patterns/somejunk.life <<'END_OF_xlife-2.0/patterns/somejunk.life'
X#P -2 -3
X***..
X*.*..
X*.*..
X**..*
X.*.**
X...*.
X**.*.
END_OF_xlife-2.0/patterns/somejunk.life
if test 51 -ne `wc -c <xlife-2.0/patterns/somejunk.life`; then
echo shar: \"xlife-2.0/patterns/somejunk.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/spark.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/spark.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/spark.life\" \(54 characters\)
sed "s/^X//" >xlife-2.0/patterns/spark.life <<'END_OF_xlife-2.0/patterns/spark.life'
X#P -3 -2
X**....**
X*.*..*.*
X..*..*..
X*.*..*.*
X**....**
END_OF_xlife-2.0/patterns/spark.life
if test 54 -ne `wc -c <xlife-2.0/patterns/spark.life`; then
echo shar: \"xlife-2.0/patterns/spark.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/spark2.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/spark2.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/spark2.life\" \(145 characters\)
sed "s/^X//" >xlife-2.0/patterns/spark2.life <<'END_OF_xlife-2.0/patterns/spark2.life'
X#P -12 -2
X**......................**
X*.*..*..*..*..*..*..*..*.*
X..*..****..****..****..*..
X*.*..*..*..*..*..*..*..*.*
X**......................**
END_OF_xlife-2.0/patterns/spark2.life
if test 145 -ne `wc -c <xlife-2.0/patterns/spark2.life`; then
echo shar: \"xlife-2.0/patterns/spark2.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/squareblinker.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/squareblinker.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/squareblinker.life\" \(29 characters\)
sed "s/^X//" >xlife-2.0/patterns/squareblinker.life <<'END_OF_xlife-2.0/patterns/squareblinker.life'
X#P -1 -1
X**..
X**..
X..**
X..**
END_OF_xlife-2.0/patterns/squareblinker.life
if test 29 -ne `wc -c <xlife-2.0/patterns/squareblinker.life`; then
echo shar: \"xlife-2.0/patterns/squareblinker.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/squarecap.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/squarecap.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/squarecap.life\" \(131 characters\)
sed "s/^X//" >xlife-2.0/patterns/squarecap.life <<'END_OF_xlife-2.0/patterns/squarecap.life'
X#R
X -7 -6
X -6 -5
X -5 -4
X -4 -3
X -3 -2
X -2 -1
X -1 0
X 0 1
X 1 2
X 2 3
X 3 4
X 4 5
X 5 6
X 7 6
X 6 7
X 7 7
END_OF_xlife-2.0/patterns/squarecap.life
if test 131 -ne `wc -c <xlife-2.0/patterns/squarecap.life`; then
echo shar: \"xlife-2.0/patterns/squarecap.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/squaredance.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/squaredance.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/squaredance.life\" \(58 characters\)
sed "s/^X//" >xlife-2.0/patterns/squaredance.life <<'END_OF_xlife-2.0/patterns/squaredance.life'
X#P -2 -3
X.***..
X......
X**..*.
X......
X.*..**
X......
X..***.
END_OF_xlife-2.0/patterns/squaredance.life
if test 58 -ne `wc -c <xlife-2.0/patterns/squaredance.life`; then
echo shar: \"xlife-2.0/patterns/squaredance.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/switchengine.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/switchengine.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/switchengine.life\" \(91 characters\)
sed "s/^X//" >xlife-2.0/patterns/switchengine.life <<'END_OF_xlife-2.0/patterns/switchengine.life'
X#R
X-12 -3
X-10 -3
X-13 -2
X-12 -1
X -9 -1
X-10 0
X -9 0
X -8 0
X 13 2
X 14 2
X 13 3
END_OF_xlife-2.0/patterns/switchengine.life
if test 91 -ne `wc -c <xlife-2.0/patterns/switchengine.life`; then
echo shar: \"xlife-2.0/patterns/switchengine.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/testtubebaby.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/testtubebaby.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/testtubebaby.life\" \(87 characters\)
sed "s/^X//" >xlife-2.0/patterns/testtubebaby.life <<'END_OF_xlife-2.0/patterns/testtubebaby.life'
X#A
X67 66
X66 67
X64 66
X65 67
X68 63
X69 63
X67 64
X69 64
X67 65
X62 63
X63 63
X62 64
X64 64
X64 65
END_OF_xlife-2.0/patterns/testtubebaby.life
if test 87 -ne `wc -c <xlife-2.0/patterns/testtubebaby.life`; then
echo shar: \"xlife-2.0/patterns/testtubebaby.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/thunderbird.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/thunderbird.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/thunderbird.life\" \(29 characters\)
sed "s/^X//" >xlife-2.0/patterns/thunderbird.life <<'END_OF_xlife-2.0/patterns/thunderbird.life'
X#P -1 -2
X***
X...
X.*.
X.*.
X.*.
END_OF_xlife-2.0/patterns/thunderbird.life
if test 29 -ne `wc -c <xlife-2.0/patterns/thunderbird.life`; then
echo shar: \"xlife-2.0/patterns/thunderbird.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
if test -f xlife-2.0/patterns/turbine8.life -a "${1}" != "-c" ; then
echo shar: Will not over-write existing file \"xlife-2.0/patterns/turbine8.life\"
else
echo shar: Extracting \"xlife-2.0/patterns/turbine8.life\" \(99 characters\)
sed "s/^X//" >xlife-2.0/patterns/turbine8.life <<'END_OF_xlife-2.0/patterns/turbine8.life'
X#P -4 -4
X******.**
X******.**
X.......**
X**.....**
X**.....**
X**.....**
X**.......
X**.******
X**.******
END_OF_xlife-2.0/patterns/turbine8.life
if test 99 -ne `wc -c <xlife-2.0/patterns/turbine8.life`; then
echo shar: \"xlife-2.0/patterns/turbine8.life\" unpacked with wrong size!
fi
# end of overwriting check
fi
echo shar: End of archive 8 \(of 8\).
cp /dev/null ark8isdone
MISSING=""
for I in 1 2 3 4 5 6 7 8 ; do
if test ! -f ark${I}isdone ; then
MISSING="${MISSING} ${I}"
fi
done
if test "${MISSING}" = "" ; then
echo You have unpacked all 8 archives.
rm -f ark[1-9]isdone
else
echo You still need to unpack the following archives:
echo " " ${MISSING}
fi
## End of shell archive.
exit 0
dan
----------------------------------------------------
O'Reilly && Associates argv at sun.com / argv at ora.com
Opinions expressed reflect those of the author only.
More information about the Comp.sources.x
mailing list