my 3b1 won't boot at all
Neal P. Murphy
murphyn at motcid.UUCP
Sat Feb 23 04:32:07 AEST 1991
jcs at cbnewsb.cb.att.com (John "C". Sucilla) writes:
>In article <1991Feb12.234150.29718 at terminator.cc.umich.edu> cja at max.ifs.umich.edu (Charles J. Antonelli) writes:
>>the other day i turned on my 3b1 and was rewarded with a screen full
>>of dots (not periods; on close inspection, it seemed that nearly every
>>other pixel or so was turned on). the dots come into view as the
>>now what do i do? has anyone been there? what did you do?
>Power it down, wait for the disk to stop spinning and then....
>.... Pick it up about two inches and then drop it.
>(I'm not kidding.)
Yes, your name isn't Shirley, but you do jest. Dropping the system two inches is a
good way to break things.
Open the case (by removing the appropriate 10-16 screws) and disconnect and reconnect
every connection you can find (after unplugging the AC mains, of course.) It should
boot after that.
NPN
More information about the Comp.sys.3b1
mailing list