WD2010 chip
Bruce D. Becker
bdb at becker.UUCP
Wed Jun 12 07:23:45 AEST 1991
In article <A2YB-KE at ris1.ferranti.com> harter at ficc.ferranti.com (ron harter) writes:
|In order to take advantage of the wd2010 I would like to upgrade the o/s from
|3.51a to 3.51m. How do I go about doing it and where do I get the diagnostic
|disk needed to ormat the larger drives?
You don't need the 3.51m /unix in order
to use the WD2010, altho it's nice to have.
You would benefit from a hardware upgrade
however in order to be able to address more
than 8 disk heads, and perhaps support extra
drives.
The revised "s4diag" is available from
OSU archives - it's about 150K uncompressed...
--
,u, Bruce Becker Toronto, Ontario
a /i/ Internet: bdb at becker.UUCP, bruce at gpu.utcs.toronto.edu
`\o\-e UUCP: ...!utai!mnetor!becker!bdb
_< /_ "Ferget yer humanity, do the poot" - devo
More information about the Comp.sys.3b1
mailing list