Installing TEAC 3.5 floppy
Van Cleef Henry H
vancleef at iastate.edu
Sun May 26 09:13:09 AEST 1991
I just picked up a TEAC 3.5 floppy with the numbers FD-235F and 112-U
and a "p/n 19307321-12" on the nameplate. In the FAQ answers from OSU
it mentions setting jumpers, but does not describe which jumpers need to
be set. There is a set of Berg jumpers next to the power connector. How
should these be configured for the 3b1. The 3.5/5.25 adapter comes with
a conversion connector for the floppy cable that also has a Berg jumper
set that referes to setting this for "ST: pin 34 on" and "OP: pin 34
off." I would like to know the correct settings before opening up the
box.
My machine is a (late) 3b1, 2meg/40meg, running o/s and dev/sys 3.51
(not yet patched to 3.51m).
--
Hank van Cleef
vancleef at iastate.edu Iowa State University, Ames. Ia.
tmn!vancleef The Union Institute, Cincinnati, Oh.
More information about the Comp.sys.3b1
mailing list