unixpc tape backup problem
Ken Staggers
kes3200 at sjfc.UUCP
Sun Apr 9 08:02:07 AEST 1989
HELP!!!!
Could someone help me with this problem?
We have a unixpc and a tape backup drive. When I was running the att "Tape
Backup Diagnostics" disk, it always gets stuck at the part:
"Checking DMA address operation...."
Yet when I run the regular diagnostics disk, processor and memory check
works perfectly. NO errors, and it doesnt get stuck.
Any ideas on what could be wrong?
------------------------------------------------------------------------
Also, what is the key in hooking up another terminal to the unixpc?
We have 6 terminals and an expansion box with a 3 combo boards, which the
system recognizes.
1- What should the setup be for the other terminal
2- How do we get it to act like a terminal (i.e. where in install do
we go? We have told it that RS232 port 1-6 are in TERMINAL mode,
9600 baud, but it doesnt work)?
There is no response. We have hooked it up with a null modem cable and we
are in multiuser mode.
HELP!!!!!
--Ken Staggers
(...!rutgers!rochester!cci632!sjfc!kes3200)
More information about the Comp.sys.att
mailing list