7300 and 9600 baud modems (VT220 suggestion, and question)

[Robert Halloran]

In article <620 at uncle.UUCP> jbm at uncle.UUCP (John B. Milton) writes:
>Anybody know what the "e" protocol is supposed to be used with? STARLAN?

The 'e' protocol is for use over Error-free transports such as a TCP connection, 
Starlan, etc.  It basically sends the file length and then just does write()s 
at the port, and assumes the medium will deliver it intact.  I suppose if you 
turned off spoofing that the Telebits could handle it, but you'd have to watch 
out for characters dropped between the modem and host.  

>John Bly Milton IV, jbm at uncle.UUCP, n8emr!uncle!jbm at osu-cis.cis.ohio-state.edu
>(614) h:252-8544, w:469-1990; N8KSN, AMPR: 44.70.0.52; Don't FLAME, inform!

						Bob Halloran
						Distributed Programming Tools Group
=========================================================================
UUCP: ...!att!mtune!rkh			DDD: (201)957-6034
Internet:   rkh at mtune.ATT.COM			       
USPS: AT&T Bell Labs, 200 Laurel Ave Rm 3G-314 Middletown NJ 07748
=========================================================================