ctc problem

[Joergen Haegg]

I have some problems with our 3b2/400. The ctc streamer won't work.
Is there anyone who could tell me if this is a hardware or software
error? (The problem may have occured during upgrading software, but
I don't know, since we hardly use the streamer at all)

os: SYSVR3.0

When booting the system the following appears:
unknown idcode 0x5 for device in slot 2
equipped device table completion will continue

INCLUDE: CTC; device not equipped
Driver not found for *VOID* device (board slot 2)

SBD
		Floppy disk
		72 Mb disk
		72 Mb disk
PORTS
*VOID*
PORTS
MAU

ct:CTC firmware pump failed on 5 succesive attempts
ct:CTC initializzation failed on CTC major 2

-- 
==============================================================================
Joergen Haegg				jh at efd.lth.se	postmaster at efd.lth.se
System manager @ efd			046-107492
Lund Institute of Technology		Sweden
==============================================================================