Large drives in a 3B2 300/310/400
Admin
sysadm at mas.UUCP
Wed Jul 25 13:40:39 AEST 1990
In article <1990Jul3.091253.13213 at cti-software.nl>, pim at cti-software.nl (Pim Zandbergen) writes:
> We used to mount Newbury NDR-2190 drives in 3B2 that need large
> hard drives. These give 144 MB formatted capacity in a 3B2.
>
> Unfortunately, Newbury does not exist anymore, so I am looking
> for an alternative drive. What other large drives will work too?
> Will the Maxtor XT-2190?
>
> We have the AT&T Devtools package. Will this do the job, or will
> I need the newer IDtools package?
>
> Thanks in advance for your reply.
> --
> Pim Zandbergen domain : pim at cti-software.nl
> CTI Software BV uucp : uunet!mcsun!hp4nl!ctisbv!pim
> Laan Copes van Cattenburch 70 phone : +31 70 3542302
> 2585 GD The Hague, The Netherlands fax : +31 70 3512837
The Maxtor 2190 will work, however, I've not been able to format one past
1024 cylinders. I had two Maxtor XT1140 drives mounted in an XM module,
and when one of them burned up, I replaced it with an XT-2190.
Unfortuntely, I wound up formatting it the same as the 1140 (918x15),
cause I didn't have time to play with it.
If anybody knows how to make this work (either 1024x15 or 1224x15), please
let ME know!!
IDtools should be fine; I have DevTools and IDTools, doesn't seem to
be a whole lot of difference between them. BTW, I've heard talk of something
rumoured to be called XMTools, which will allow you to format drives that
are attached to an XM controller. Anybody know about this??
_
' )--,--, | Marc Siegel
/ / / __. __ _ | Emtronix Data Services
/ / (_(_/|_/ (_(_' | Randallstown, Maryland
| {uunet}!wb3ffv!mas!smarc
I know, it's only rock-n-roll, | smarc at mas.wb3ffv.AMPR.ORG
but I like it.
More information about the Comp.sys.att
mailing list