3b2 disk limit

[Dennis S. Breckenridge]

woods at eci386.uucp (Greg A. Woods) writes:

>If you are using a Maxtor, or some other large drive with similar
>geometry, you can use drive type id 11.  Filledt and/or prtconf know
>this drive type as a "135 Megabyte Drive".

What about adding a MAXTOR entry in the equipped device table. I used 
to remember the command syntax, but a man page on /etc/edttbl used to
show you how. I thought it was something like:
/etc/edttbl -l /dgn/edt_data -blah blah. This is where all the prtconf
info comes from. DGN should find it as well unless EhTNT buried the 
drive test configs into the binaries!
-- 
-----------------------------------------------------------------------------
Dennis S. Breckenridge  (604) 277-7413   dennis at nebulus.uucp           VE7TCP
               Still brain dead after all these years :-)     
-----------------------------------------------------------------------------