Questions bru-ing
DanKarron at UCBVAX.BERKELEY.EDU
DanKarron at UCBVAX.BERKELEY.EDU
Sat Dec 22 15:52:57 AEST 1990
Dave Olson write about what Peter S. Shenkin writes:
>I'm not clear on what you mean by 'recognize' here. By default, bru
>uses the 'normal' method of doing multivolume tapes on IRIX (for the
>SCSI and and xm tape drives), which is to write until EOT is detected,
>then switch to a new volume. To do this, the tape sizes are set to 0K
>in /etc/brutab. There is absolutely no way to determine tape lengths
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^HUH???
>ahead of time, since e.g. a QIC 150 drive could have either QIC150 or
>QIC120 cartridges, in any of several lengths. This is true of most
>types of tape drives. If you are certain of the capacity, and are sure
>you will use exactly the same tape type and length for each volume, you
>could use the -s option to specify the length, or edit /etc/brutab.
>
>| It is also a real pain that -e does not work with -Z; the FM does not
>| mention this limitation; however, an attempt to do this elicits an error
>| message. I submit that just about the only time you need -e is when you use
>| -Z; yet that's when you can't get it.
>
>The reason it doesn't do this is that it would actually have to read and
>compress every single file in order to determine how much space the
>compressed files would require. This is incredibly slow. If you really
^^^^^^^^^^^^^^^SO WHAT!
>wanted to know, you could always do something gross like:
> bru -cvfZ /dev/null .... | tail
>
Sounds like a good idea, actually. Since my tape backup is done automatically
from crontab in the dead of night after I leave, I don't really care how
slow it is. I mt ret the tape a number of time during the backup process
just for its good health. My main worry is the tape filling up and the
Night Backup script not knowing what to do. I compress the data to put off
the eventual EOT . I would like some foolproof
way to know in advance if I am goint to hit EOT, not blunder on it and
risk corrupting my backup. That way I can do something intelligent before
it happens!
We need a program to size any serial media (qic,dat, etc). I have seen it
on more business oriented computer systems (NCR unix). We also need
a taylored bru tab that know about sgi boxes (there are no entries for
sgi tape devices in the bru tab!)
Cheers!
dan.
+-----------------------------------------------------------------------------+
| karron at nyu.edu (E-mail alias that will always find me) |
| Fax: 212 340 7190 * Dan Karron, Research Associate |
| . . . . . . . . . . . . . . * New York University Medical Center |
| 560 First Avenue \*\ Pager <1> (212) 397 9330 |
| New York, New York 10016 \**\ <2> 10896 <3> <your-number-here> |
| (212) 340 5210 \***\_________________________________________ |
| Main machine: karron.med.nyu.edu (128.122.135.3) IRIS 85GT |
+-----------------------------------------------------------------------------+
More information about the Comp.sys.sgi
mailing list