Printer set-up question

[Brent L. Bates AAD/TAB MS361 x42854]

   We have a 3130 and none of the things you listed are in our manual.
Ours has:

   chown lp /dev/ttyd[0-3]    (I used ttyf, so I would also have hardware
   chmod 600 /dev/ttyd[0-3]    control of the line)

vi /etc/inittab and change required line to:

   d[0-3]:x:respawn:/etc/getty ttyd[0-3] dx_9600

Turn off lp scheduler with lpshut
use lpadmin to set up the necessary files
vi /usr/spool/lp/interface/[filter name], if needed.
start lp with lpsched, use accept, then enable
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates at aero4.larc.nasa.gov or blbates at aero2.larc.nasa.gov