Parallel printing from 4D/70G ?

[Kenneth Josiah Harris]

	here is an online copy of FIB 17:


FIB # 17

TITLE
	Ikon Parallel Interface Terminator Configuration

MODELS AFFECTED
	3XXX, 4D

SOFTWARE RELEASE
	All

PARTS/DOCUMENTATION AFFECTED	PART NUMBER	REV	DA
3XXX Ikon Board, Model 10085	5000-173-09	M
4D Ikon Board, Model 10088	013-0207-001	C

REPORTED BY
	Don Holcombe

DATE REPORTED
	09/29/87

ASSIGNED TO
	Ron Ludwig

DATE RESOLVED
	09/30/87

EFFECTIVITY
	Immediate

REFERENCE
	Figures 1, 2, Revision History and Figure 3

DESCRIPTION
	The Ikon Board comes from the manufacturer not configured for
	use with the Tektronix 4692 Color Printer.
.br
	The Ikon Board has a TERMINATOR resistor pack which must be
	installed up-side down to be correctly configured for the
	Tektronix 4692 Color Printer.

ACTION REQUIRED
	None...For your information only!

RESOLUTION/RECOMMENDATION
	The 3XXX Ikon Board, Model 10085 (figure 1) has a TERMINATOR resistor
	pack in U4 which must be installed up-side down to be correctly
	configured for the Tektronix 4692 Color Printer.
.sp .5
	The 4D Ikon Board, Model 10088, rev A (figure 2) has a TERMINATOR
	resistor pack in U80 which must be removed and a SPARE TERMINATOR in
	UX1 must be installed in U80 up-side down to be correctly configured
	for the Tektronix 4692 Color Printer.
.nf
	U80 should be 100ohm terminator, reverse polarity for Tektronix 4692.
	U80 should be 220ohm terminator, forward polarity for other printers.
.sp .5
	The 4D Ikon Board, Model 10088, rev B (figure 3) has a TERMINATOR
	resistor pack in U84 which must be installed up-side down to be
	correctly configured for the Tektronix 4692 Color Printer.
-- 
Ken J. Harris -- kj at sgi.com or {decwrl,pyramid,ucbvax}!sgi!kj







Ken J. Harris -- kj at sgi.com or {decwrl,pyramid,ucbvax}!sgi!kj