things to be careful of when swapping a 3/60 board

[Rick Wagoner]

The following change needs to be made to the original article:

	4		Installed memory (don't be surprised if this
			happens to be zero...and you get "Checking
			0 memory"), set it to the number of Mbytes
			of memory you have.
SHOULD BE:


	14		Installed memory.  In reality this location serves
			no purpose.  See next location:
ADD:

	15		The amount of memory to test in NORMAL mode.
			This should always be set to the amount of memory
			installed or greater.

	1B - 1D		Add these to the 19 -1A cautions.

	22 - 26		Diagnostic boot path:  These location perform the
			same functions as 19 - 1D, but are interogated when
			the system tries to boot in the DIAG mode.

When in doubt, check the Prom Users Guide ( Brown Tabs ) in the 4.0 Docubox.

Merry Christmas !!

Rick Wagoner
sun!rwagoner