Help With TrailBlazer + on Sun 3/160

[Hal Stern]

i have a new trailblazer+ and have had quite a bit of trouble getting it
to run with uucp on a sun-3.

our hardware: sun 3/160, modem on serial port "a"
software: SunOS 3.2, but with 4.2-style uucp (hacked by Boston Univ
	for some local uucp protocols, don't ask why).

what works:
	- dial in/out at all speeds up to 19.2kb. i can dial
		all remote sites and get logged in

	- switching the same line between dial in/out

what doesn't work:
	when uucico dials a remote site, it dials without
	problem, but immediately produces
	root princeton () FAILED (ATDT1.....)

	HOWEVER - i see the login banner go by, and have
	seen the "CONNECTED" message from the modem. when
	listening to the modem, it sounds like it is
	connecting at high speed.

i can only assume that someone (uucico probably) doesn't like a return
code.  

any help is appreciated.  replies by mail, please.

--hal stern
  polygen corporation
  200 fifth avenue
  waltham, ma  02254
  (617) 890-2888

  {mit-eddie, bu-cs, princeton, sunne}!polygen!stern