modem trouble (4.
Roy Livingston
rlivings at thor.wright.edu
Thu Aug 9 05:18:36 AEST 1990
I've recently added a modem to a Sun 3/60 running 4.0.3 and am having
problems dialing out. I can dial in correctly provided that no one has
previously used tip or uucp to dial out. However, once a dial out has
occurred it becomes impossible to dial in again without power cycleing the
modem. The modem is a Multimodem 696E connected to the serial
communications controller on the CPU board (zs0). The kernel is
configured with the zs0 flag as 0x0 (enable hardware carrier detect). In
addition I have the modem set up as follows:
DTR dependent on interface
CD & DSR function normally
RTS dependent on interface
DCD normal
DTR normal
CTS dependent on interface
Hayes responses
Asynchronous operation
Automatic answer enabled
Data compression enabled
Has anybody run across a similar problem or have a suggestion
as to what the problem might be?
More information about the Comp.sys.sun
mailing list