Sun 2/170 memory expansion
Nick Sayer
ames!quack!mrapple at pasteur.Berkeley.EDU
Sat Mar 17 04:44:34 AEST 1990
It's me again, the 2/170 lives on...
Anyway, my system has 4 1MB RAM cards installed, and in this
configuration, it works acceptably well. A few days ago, I got a 4 MB RAM
card with 3 MB installed (1 MB missing). If I stick the card in the first
slot the system runs with 7 MB for a little bit, then coughs up a parity
error. This occurs regardless of where (in logical counting) the board
sits.
According to Sun technical support my system is a "non-prime," or old
version, and that it was unlikely I would be able to get the card to work.
It seems unlikely to me that the card cage is to blame, but if it is,
there's probably nothing I can do to fix it. That leaves the CPU board.
Would obtaining a new CPU board fix the problem? Is it worth it?
If it's not the CPU card, what else could it be? I have an ie0 ethernet
board, a tm0 tape board, xy0 disk board and an mti0 terminal board. The
ethernet board is not hooked up to a transceiver.
While I'm at it, here's a dumb question: If I get a 68020 multibus
CPU card can I run 60820 SunOS? (probably not, right?)
Nick Sayer - The Goose Egg public unix - 209-952-5347 (Telebit)
More information about the Comp.sys.sun
mailing list