Switching from thin to thick Ethernet on a Sun 3/50

[Thomas Yen]

In article <1990Sep12.180306.12073 at rice.edu>, mikem at se-sd.sandiego.ncr.com (Mike Miller) writes:
|> In article <1990Aug13.011115.5713 at rice.edu> matt at antioch.acns.nwu.edu (Matthew Larson) writes:
|> 
|> The ethernet interface is switchable between thin and thick via a dip on
|> the mother board.  you will need to open the cpu box (4 allen screws) and
|> pull the mother board.  The dip should be located near your ethernet
|> connectors.  It could also be located in a different area as a set of
|> jumpers.  I'd just call Sun if I couldnt find it, they'll tell you where.
|> Anyway, the dip or jumper settings are in the Hardware Installation
|> manuals. Or ask local Sun.

	Here I think is the correct jumper setting at J800

13-14                In                                      Thicknet
13-14                Out                                     Thinnet (Default)