X Server Dying

[Chris McCoy]

I thought I'd post this to the netter's first before I fight with
Frame Technology and IBM to see if anyone has experienced similar
problems.

My configuration:
	RISC/6000 model 320
	32 MB main memory
	320 MB disk
	Gray Scale Graphics Adapter (4-bits)
	8508 monitor
	3001 update applied

I've been experiencing problems with the X server dying and locking
my console.  Typically, this happens when communicating with remote
hosts, but recently when I installed FrameMaker 2.0, it happens
quite often.  When I run FrameMaker and try to perform any operation
on a document or its associated window, the X server dies and I'm
hosed.  It runs fine on our Xstation, SUN SPARCstation, and Zenith
(Frame binary on the IBM).

Has anyone else experienced this type of problem?  If anyone has FrameMaker
running, I'd *really* be interested in hearing from you.  I'm convinced
the problem lies with the X server on the IBM, but I don't have enough
fuel on this problem.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Chris McCoy                         : INTERNET:   mccoy at acn.purdue.edu
Systems Programmer                  : UUCP:       ...!ecn-ee!mccoy
Ag. Computer Network, Purdue Univ.  : VOICE:      (317) 494-8333
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=