Apple 40Meg Tape Drive for AUX
Steve Green
steveg at tove.umd.edu
Mon Jul 24 08:21:54 AEST 1989
In article <1989Jul23.150405.4175 at radar.uucp] donn at radar.uucp (Donn S. Fishbein) writes:
] root at advsln.UUCP (root) writes:
] ] ...and performed a mknod /dev/rmt/tc1 b 9 0 and mknod /dev/rmt/tc1n b 9 0 to
] ] create the appropriate special files (tape is on SCSI id 1).
]
] ] The problem is that : (1) I guessed at the minor number, though I thought 0
] ] seems reasonable and (2) tar, cpio etc can not open the device.
]
] ] I also set the owner and group on the special files to bin.
]
] ] Can someone shed some light on my problem and how
] ] does one go about formatting the tapes (diskformat does not seem to be
] ] the right utility).
]
] Here's a couple of lines from my /dev/rmt:
] crw-rw-rw- 1 root sys 9, 0 Jul 2 12:29 tc0
] crw-rw-rw- 1 root sys 9, 8 Jul 2 12:29 tc0n
] crw-rw-rw- 1 root sys 9, 1 Jul 2 12:29 tc1
] crw-rw-rw- 1 root sys 9, 9 Jul 2 12:29 tc1n
] ..(The minor number is the SCSI ID, or +8 for the tcXn device)
]
] As far as formatting tapes, the only thing I've been able to figure
] out is to use Tape Backup 40SC under MacOS.
Well, I just used newunix tc and then autoconfig and it did it all for me. I
used
autoconfig -I -o /unix -S /etc/startup -M /etc/master
As fas as formatting, you can use mt(1).
mt -f/dev/rmt/tc? format
PS: dont forget to re-kconfig. 8-(
-steveg at tove.umd.edu
More information about the Comp.unix.aux
mailing list