How Does Mail Work? (Also, modems, cables, telebits, etc.)
Richard Todd
rmtodd at servalan.uucp
Sat Nov 10 11:00:04 AEST 1990
alexis at panix.uucp (Alexis Rosen) writes:
>So far, a telebit is the _only_ modem I've managed to make work with A/UX
>consistently over long periods. I've been experimenting with several
>different sorts of 2400bps modems for the last two weeks and they're
>driving me up a wall!!! I'm beginning to suspect that there may be some
>flaw in A/UX, although I'm at a loss to explain how. What I do know is that
>I've seen strange behavior that should be impossible, which goes away when
>I reboot. On the other hand, some behavior is more persistent (and annoying!).
What sort of behavior are you seeing? I'm sort of curious. For several
months I started out using a rather mutant 2400bps modem (Concord Data
Systems, if you must know--not even making any pretense at being Hayes
compat) and had no problems using it, though I was at the time only using
it for dial-out. After the 2400bps modem died due to lightning (they put the
Nat'l Severe Storms Lab in Norman, OK for very good reasons :-), I used a
1200bps generic Hayes-clone modem (the "Smart Duck" they used to sell in the
DAK catalogs, for those of you who remember those) for a while until I scraped
together the cash for a T1000. Again, no problems with dialout. I now
use a T1000 for dialin and dialout with no problems.
>If you want to dial out with A/UX, you'll have to do a "stty -n /dev/ttyxx
> -modem", but I think telecom is that last thing on earth I'd want to do with
>A/UX. Use a Mac app instead- I think all the standard ones work fine with
>A/UX.
Well, I don't know what the "standard" Mac apps for telecom are, but I
tried Zterm and it failed miserably--claimed all serial ports were busy.
Me, my favorite telecom program was always ProComm for the PC, so I get
along well with Emmet Gray's Pcomm program (ProComm clone for Unix). Let
me know if a) you want the config files, etc. for compiling under A/UX or
b) you know where I can track down more recent patches for Pcomm than
patchlevel 4...
>>Do the Telebits work well at 2400 baud. (The main campus modem
>>pool is 2400 and less.
>They have no problem, and speak MNP up to 5 (older ones up to 4, I think).
I've never had any problem using the T1000 to call 2400bps modems either.
I think the T1000 only goes up to MNP4; at least my (1-year-old) one does.
>Now it's my turn to cry for help. If anyone can tell me what's wrong with
>my modems, I'll be very grateful. Help!!!
Tell us more about your setup (config files, gettytab/inittab settings),
and I'm sure the Usenet readership will be glad to offer opinions. Some of
them may even be correct :-).
--
Richard Todd rmtodd at uokmax.ecn.uoknor.edu rmtodd at chinet.chi.il.us
rmtodd at servalan.uucp
Only 1 More Day Until The Season Premiere of WISEGUY!
More information about the Comp.unix.aux
mailing list