NBUF and pstat
Jim Jagielski
jim at jagubox.gsfc.nasa.gov
Thu Jan 17 23:45:54 AEST 1991
In article <2859 at redstar.cs.qmw.ac.uk> liam at cs.qmw.ac.uk (William Roberts;) writes:
}In <2657 at dftsrv.gsfc.nasa.gov> jim at jagubox.gsfc.nasa.gov (Jim Jagielski)
}writes:
}
}
}>Currently, my kernel is built with NBUF being 0, meaning that 10% of
}>the free space at start-up is utilized for disk buffers. I want more.
}>The question is how many buffers are there???
}
}>I would guess, using pstat, that NBUF is actually set to 1551 since
}>that is the value that pstat returns for buffers.... Is this right?
}
}I believe that you are right:
}
I am :):)
}
}Your figure of 1551 seems very high - let me guess: either you are running a
}32 Megabyte machine, or you have SBUFSIZE set to 1024 and you are running a 16
}Meg machine.
}
It's a 32 meg mac with SBUFSIZE 2048... right again!
Anyway, this all leads to an interesting question... certainly, as far as
disk buffers are concerned, there is a point of diminishing returns where
increasing the amount of buffers adds very little or even DECREASES performance
(possibly). Does anyone have any good system tuning information for A/UX...
25% memory for NBUF seems about right, but with large systems (32 megs) that
still leaves a good chunk of free memory... Of course, that isn't bad since
that means that swapping won't occur :)
--
=======================================================================
#include <std/disclaimer.h>
=:^)
Jim Jagielski NASA/GSFC, Code 711.1
jim at jagubox.gsfc.nasa.gov Greenbelt, MD 20771
"Exploding is a perfectly normal medical phenomenon. In many fields of
medicine nowadays, a dose of dynamite can do a world of good."
More information about the Comp.unix.aux
mailing list