Printing to epson-compatable with A/UX 2.01?

[Louis Lamarche]

In article <morrison.676923676 at cunews>, morrison at ccs.carleton.ca (Greg Morrison) writes:
|> We've just installed A/UX 2.0.1, and are now trying to print to an
|> epson-compatable printer, connected to the Mac's printer port.  We
|> used lpadmin to define the printer, using /dev/tty1 and the model
|> 'dumb', started lpsched, and used accept and enable.  But... no luck.
|> 
|> Using the lpr command generated a series of messages
|>    
|>    atstatus:No printer selected by Macintosh chooser
|> 

I have the same problem using a LaserWriter on an AppleTalk network. I seems
that there the lpd (daemon) is not compatible with the new versions of
at_cho_prn, atstatus and atprint. So my solution for the moment:

mkdir /usr/bin/NewATBUG
mv atstatus  /usr/bin/NewATBUG
mv atprint  /usr/bin/NewATBUG
mv at_cho_prn  /usr/bin/NewATBUG

and get the 2.0 versions of these files in /usr/bin.

-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Louis Lamarche, IREQ |       lamarche at IREQ.Hydro.Qc.CA
| CP 1000, Varennes    |                 or
| QC, Canada, J3X 1S1  |  514-652-8077 (office)  514-324-2919 (home)