Booting in Single-User Mode

[Dave Levenson]

You can edit the initdefault line in /etc/inittab.  Change the
default init state from 3 to 1, and the system will always boot in
single-user mode.  After you boot, enter the command init 3 to
switch into multi-user mode, when/if you want to.
-- 
Dave Levenson			Voice: 908 647 0900  Fax: 908 647 6857
Westmark, Inc.			UUCP: {uunet | rutgers | att}!westmark!dave
Warren, NJ, USA			AT&T Mail: !westmark!dave
[The Man in the Mooney]