dial-up, UUCP in/outbound, pcomm outbound on ESIX

[heiser at tdw201.ed.ray.com]

Hi again,

I've done a little preliminary experimenting with modem communications
with Esix.  I think I can get inbound communications to work ok, but
it looks like the gettydefs file needs some tweaking. I had to 
change it so that the baud rate didn't drop, in order to get it
to communicate successfully.

My goal is as follows:  Use (for now) a USR HST for both inbound
calls (unix sessions and bbs calls), outbound calls using Pcomm or similar
comm program, and both inbound and outbound Uucp calls.

Does anyone have any suggestions on how this should be set up?
The "Pcomm calls" part is the LEAST critical, as I can (and will)
be using a different modem & port for that most of the time anyway.
The inbound calls and uucp calls are critical.

Input from others doing similar things with Esix would be appreciated
and useful.

Thanks!

Bill


-- 
Bill Heiser
	Work:   heiser at tdw201.ed.ray.com
		{decuac,necntc,uunet}!rayssd!tdw201!heiser
	Home:   Bill.Heiser at f240.n322.z1.fidonet.org (Fidonet 1:322/240)
		The Think_Tank BBS (508)655-3848  1200/2400/9600-HST
	Other:  75106.2332 at compuserve.com
	Other:	heiser at world.std.com     (Public Access Unix)