Driver for WD8003/Locus PC-Interface

[Daniel A. Graifer]

In article <1990Aug14.103159.26913 at santra.uucp> tsh at hila.hut.fi (Timo Hyvonen) writes:
>... problem getting my good ole' dos-machine connected to the network. ...
>This lack is caused by this huge driver, bridge.ip. It consumes easily
>about 40k of my DOS-memory and then other services stop.

Don't complain so much.  Many networks take up much more.  I have a friend
on IBM Token Ring, it appears to use > 150K.  I think NetWare uses about 50K
as PCI does.

Oh, by the way, I believe bridge.ip is the part that traps the BIOS calls
and sends them to the host via the ethernet driver.  You should have a separate
driver for your Ethernet controller.  At least my PCI (2.8.7) does.

Can anybody post how much PCNFS uses?

Dan
-- 
Daniel A. Graifer			Franklin Mortgage Capital Corporation
uunet!dag at fmccva.franklin.com		7900 Westpark Drive, Suite A130
(703)448-3300				McLean, VA  22102