WD1003-WA2

[Chuck Luciano]

I would like to thank everybody for the responses I received to my previous
postings. I am making some progress in getting SCO UNIX 3.2 up on my 
computer.

I bought a IDE (MAXSTOR) 200Mb drive for my system. (Nice little drive!)

I would still like to have my MFM disks available.

The consenses(sp?) is that 2 controllers are okay if ..
     You set the second controller to the secondary address, 
     and you change interrupt 14 to interrupt 15.

My MFM controller is a WD1003-WA2. It has several jumpers on it that look
like this:

Jumpers between E2 & E3, E5 & E6, and E7 & E8
-----------------------------------------------------------------------------
|                            E E E                                          |
|                            1 2 3                                          |
|                            *[* *]                                         |
|                            *[* *]                             * E7        |
|                            E E E                              |           |
|                            4 5 6                              * E8        |
|                                                                           |
|                                                               * E9        |
|                                                                           |
|                                                                           |
-----------------------------------------|||||||||||||-----|||||||||||||||||-

I have lost or never had the documentation for the board, is there anybody
out there with the docs who can fax me a copy or suggest the proper jumper
settings if what I want to do is even possible.

Also I will go as far as to use a soldering iron if need be. I think I
could figure out how to change the interrupt pretty easily, it's the 
addressing I'm not sure of.

Thanks

Chuck Luciano
303-421-9113 (Home)
eatdust!chuck at uswat.uswest.com