Creating a socket with ISC's libinet.a

[Piercarlo Grandi]

In article <1990Jan16.011859.5080 at mks.com> eric at mks.com (Eric Gisin) writes:
    
    I figured all this out while trying to decide what it would
    take to build X11.4 on 386/IX.  It looks like you could
    easily build it with either socket emulation or native streams.

Use native streams! A lot of us out here don't have ethernet,
and want to run X. Once you have done streams, sockets is
trivial.

    But you would only get tcp based connections, not local connections.

The reverse, if you use streams. Or maybe you mean TLI...

    Has anyone reverse engineered the local connection code
    that Interactive uses? It is different that the scheme
    ATT uses in lib/X/XStream.c.  Interactive uses /dev/spx,
    while ATT uses /dev/ptmx. Are either of these devices documented?

/dev/spx is a clone device for stream pipes. It is not really
documented, but in the AT&T stream manuals they give as an
example the source for a driver for stream pipes; methinks that
/dev/spx is exactly that driver, without even too many bells
and whistles. Actually I think that in normal use you just want
to clone /dev/spx, and then the returned filedescriptor can be
used as a pipe.

I actually reckon that if all pipes in the system were done
with streams, they would be faster (as are the socket/mbuf
based pipes of BSD). Just wait until SysV.4...

"/dev/ptmx" is the clone device of the stream ptys. What they
do is fairly easy to understand if you look at
"/usr/include/sys/pt*.h"... Actually it is not really different
from a stream pipe; you open the clone device, and you get in
the minor of the returned filedescriptor the number fo the
couple of /dev/pt[sm] devices that you have been allocated; a
stream pipe exists between the two sides, master and slave.
Then you push "ldterm" on the slave part, and that's it. I
think that for X11 one should not push "ldterm", unless the X11
protocol has been changed to require processing through a line
discipline (:-> :-> :->), and just use /dev/spmx as a generator
of named pipes.

In the GNU emacs for SysV.3.2 patches that I posted a while ago
there is a section on using stream ptys instead of BSD
compatible ptys, and the code is very generic.
-- 
Piercarlo "Peter" Grandi           | ARPA: pcg%cs.aber.ac.uk at nsfnet-relay.ac.uk
Dept of CS, UCW Aberystwyth        | UUCP: ...!mcvax!ukc!aber-cs!pcg
Penglais, Aberystwyth SY23 3BZ, UK | INET: pcg at cs.aber.ac.uk