386/ix Upgrade to 2.2. info
Conor P. Cahill
cpcahil at virtech.uucp
Sun Jun 17 22:40:11 AEST 1990
I just upgraded my 386/ix 2.0.2 system to Interactive Unix 2.2 and
had a few problems that I thought I would share with the net:
NOTE: I have only had the system up for a day and still have yet to
read the mountains of documentation, so some of what I say may be
documented somewhere, but it is not in any of the release notes that
I found.
1. If you are upgrading to one of the workstation packages, you will
not get a new X11. You must use the existing X11 (should be at release
1.1) that you already have. If you are not at X11 1.1, they will
happily take a few extra bucks to upgrade your X11 as a separate
upgrade.
2. The new system is larger than the old stuff because of several
new packages). If you are like me (i.e.: you load the entire system)
the workstation developer setup now takes up a full 56MB. My old
system had a 49MB combined root/usr and I thought I would need some
extra space, so I repartitioned the disk to have 56MB (just a number
I picked out of a hat, I didn't read it anywhere in the docs). When
my installation completed I hade a total of something like 470 blocks
so I couldn't even compile a new kernel.
3. The on-line manual pages are installed from a series of cpio
files and if you select the removepkg option to delete the manuals,
all that gets deleted is the cpio files, not the manual pages
themselves. This is a two part problem:
1st: when the manuals are installed, the cpio files should
be removed
2nd: when you run removepkg to delete the manuals it should
delete the zillions of manual page entries in
/usr/catman/[up]_man
If you want to remove the manual pages (and I did, since I needed the
space to be able to build a kernel) you have to:
cd /usr/catman
rm -rf [up]_man (always be very careful when -r is involved)
4. They changed the startup status of the keyboard so that now it
starts up in <NUM-LOCK> mode so the del key gets you a "." instead
of killing the process (ultil you realize what is going on and
hit the numlock key or use the <Delete> key).
5. Ftp now defaults to non-binary mode. So that a transfer that
I used to save a backup copy of my login directory on another
machine without setting any special arguments still succeeds, but
does not transfer the file correctly. Setting binary once the
ftp connection is established fixes this.
--
Conor P. Cahill (703)430-9247 Virtual Technologies, Inc.,
uunet!virtech!cpcahil 46030 Manekin Plaza, Suite 160
Sterling, VA 22170
More information about the Comp.unix.i386
mailing list