pcomm (was: cu(1), ckermit and rz)

[Eric M. Kleinpaste]

	Thanks to the several people who sent suggestions concerning
my questions using cu, ckermit and rz.  Several suggested the use of pcomm.
I acquired the sources and all appeared to be working fine.  The only
problem appears to be that after doing a download the input process does
not appear to be reading the port.  I can see action on the modem but there 
is nothing going to the screen.  When I press the escape key (^A) the 
information which was buffered then appears.  Before I start looking at the 
source too closely I thought I would see if anyone else has had problems of 
this type with pcomm. 

eric...