termcap entry for ansi

[Lawrence F. Strickland]

>From article <586 at nvuxr.UUCP>, by cmc3 at nvuxr.UUCP (C Chase):
> 
> I have encountered some difficulty with my port of jove to 
> my 2.3 release of sytem V/AT.  In particular, doing a C-N (next-line)
> while at the bottom of the screen results in garbage.  I believe
> ...
> I took a binary termcap file from another system V machine
> and my problems with jove went away.  However, I had some troubles with
> other screen oriented programs.  Before I started fiddling with the 

I've had a similar problem running moria on a SUN 3/50 from remote terminals.
As long as you are on the system console there appears to be no
problem, but when you shift to a remote terminal running vt100, ansi,
etc. moria messes up.  Vi does not.

After some work, I traced the problem to the clear-to-end-of-line
specifier in the termcap file.  By removing that (and creating a new
entry first), I've gotten moria to work fine, albeit a little slow.

Now, however, vi has some rather painful problems.  It occassionally
does not draw the screen correctly.  If I shift back to the standard
ansi or vt100 termcap's everything works fine.  Is it possible that
there is a problem with speed????

-larry
-- 
+--------------------------------------+-- St. Petersburg Junior College --+
|        Lawrence F. Strickland        |   P.O. Box 13489                  |
| ...gatech!codas!usfvax2!jc3b21!larry |   St. Petersburg, FL 33733        |
+-(or) ...gatech!usfvax2!jc3b21!larry -+-- Phone: +1 813 341 4705 ---------+