Serial Boards

[Rick Richardson]

In article <343 at puck.UUCP> asp at puck.UUCP (Andy Puchrik) writes:
>In article <2652 at nuchat.UUCP>, steve at nuchat.UUCP (Steve Nuchia) writes:
>> I am successfully running at 9600bps on a Bell Tech 386 with Bell Tech's
>> version of Interactive V.3, using a "dumb" port with a "smart" chip
>> retrofitted.
>What kinds of boards would this work for?  I have a Digicomm 4-port board.
>Is this one dumb enough to be a candidate for a chip(s) upgrade?

This here Digicom-4 has had 16550A's in it since last February.  Runs
the Trailblazer off our AT.  I haven't tried the Digicom in the 386,
since I could see no reason to make the change.  I've got a total
of 8 serial ports between the two machines (6 on the AT, 2 on the 386),
and they all run with 16550A's.




-- 
Rick Richardson | JetRoff "di"-troff to LaserJet Postprocessor|uunet!pcrat!dry2
PC Research,Inc.| Mail: uunet!pcrat!jetroff; For anon uucp do:|for Dhrystone 2
uunet!pcrat!rick| uucp jetroff!~jetuucp/file_list ~nuucp/.    |submission forms.
jetroff Wk2200-0300,Sa,Su ACU {2400,PEP19200} 12013898963 "" \r ogin: jetuucp