need help with modem, the saga continues

[Dave Remien]

Maybe I'm lucky, but all I did with my Mylex '386 and 3.0e was run a
standard AT cable from the 9 pin connector on the comuter into the back
of a Hayes 1200 external modem, copy the 1200 baud section in
/etc/gettydefs to 1200P and set it so that it wraps to itself, (i.e.,
1200P:.....:1200P), make an entry in inittab like so:

m0:23:respawn:/etc/getty -h -t 30 ttyM00 1200P   # For modem on COM1 - incoming 

set the modem switches to 3 and 8 down, rest up, and it works fine for
both incoming and outgoing.

Are there lots of people having as little fun as Randy Menna? (:-).

-- 
Dave Remien - WINCO Computer Engineering Group (only somewhat confused, now)
Work - 208-526-3523 Home - 208-524-1906 UUCP Path: ...!bigtex!pmafire!dave