Perstor PS180-16F

[Ken Chapin]

In article <1189.23D1A29A at mamab.UUCP> mark at mamab.UUCP (Mark Woodruff) writes:
>Does anyone know if System V/AT supports the Perstor 16 bit hard disk/floppy 
>controller?  The Perstor normally formats to 31 sectors per track, 
>which V/AT can't handle, but it is also (supposedly) register-level 
>compatible with the WD1003-WA2 controller.
> 

V/AT Ver. 2.4 has a limit of 64 sectors/track hard coded into it. I thought
that the Perstor required that you set your drive type to 0 in CMOS. If that
is the case then V/AT will assume that no drive is installed. If that is not the
case and the controller is register level compatible with the WD1003 then there 
is no reason for it not to work.

Ken Chapin         UUCP: ...!{sun | ucbvax | ihnp4}!amdcad!uport!ken
Microport Systems
Technical Support