mailer error report for <8806150245.aa21052 at SEM.BRL.ARPA>
mcvax!minster.york.ac.uk!postmaster at uunet.uu.net
mcvax!minster.york.ac.uk!postmaster at uunet.uu.net
Thu Jun 16 21:49:48 AEST 1988
Reason: local mail handler complained as follows
jmail: HuwR -- unknown user or mailbox
-------- rejected letter ---------
Via: 00004001015218/UCL-CS.FTP.MAIL ; 16 Jun 1988 00:29:19 GMT
Received: from NSS.CS.UCL.AC.UK by NSS.Cs.Ucl.AC.UK via List-Channel
id aa07555; 15 Jun 88 23:02 BST
Received: from sem.brl.mil by NSS.Cs.Ucl.AC.UK via Satnet with SMTP
id aa07495; 15 Jun 88 22:57 BST
Received: from SEM.BRL.MIL by SEM.brl.ARPA id ab21139; 15 Jun 88 3:03 EDT
Received: from sem.brl.mil by SEM.BRL.ARPA id aa21052; 15 Jun 88 2:45 EDT
Date: Wed, 15 Jun 88 02:45:40 EST
From: The Moderator (Mike Muuss) <Info-Unix-Request at arpa.brl>
To: INFO-UNIX at arpa.brl
Reply-To: INFO-UNIX at arpa.brl
Subject: INFO-UNIX Digest V5#069
Message-ID: <8806150245.aa21052 at SEM.BRL.ARPA>
Sender: info-unix-request at uk.ac.ucl.cs.nss
INFO-UNIX Digest Wed, 15 Jun 1988 V5#069
Today's Topics:
4.3BSD & CDC 9720/850 & Emulex UD33
Re: AT&T vs. CSS (PC/Tools)
SYS V sigset(2)
WANTED: Best setup for environment using Tandy 1000 and DeskMate II
Re: AT&T vs. CSS (PC/Tools)
Re: .mailrc
Re: afio
-----------------------------------------------------------------
From: Norm Strong <strong at tc.fluke.com>
Subject: .mailrc
Date: 14 Jun 88 16:56:17 GMT
Sender: news at tc.fluke.com
To: info-unix at SEM.BRL.MIL
I would like to put something in my .mailrc file, so that I will automatically
be in the vi editor when I invoke the mail program. Currently, I have to type
~v every time. Is there a way to do this?
--
Norm (strong at tc.fluke.com)
-----------------------------
From: "Stephen A. Mattin" <sam at gsg.uucp>
Subject: 4.3BSD & CDC 9720/850 & Emulex UD33
Date: 14 Jun 88 16:05:36 GMT
Keywords: disk BSD CDC Emulex
To: info-unix at brl-sem.arpa
We are considering replacing the hard disk drives on our VAX 750
with a CDC 9720/850 (Saber 4) using an Emulex UD33 (Unibus) controller.
I would appreciate hearing from anyone who has tried the above drives
and/or controller under 4.3BSD Unix or Mach. If you are using the drive,
I would also appreciate the default partition table.
We are also considering CDC 9720/1230 disks for use on Sun workstations.
Any experiences using these drives would be helpful.
Please reply by e-mail. Thanks in advance.
SAM
--
Stephen A. Mattin UUCP: {decvax,harvard}!gsg!sam
G.S.G., Inc.
51 Main Street
Salem, N.H. 03079 telephone: 1-617-893-1000
-----------------------------
From: Dominick Samperi <samperi at marob.masa.com>
Subject: Re: AT&T vs. CSS (PC/Tools)
Date: 14 Jun 88 13:46:39 GMT
Keywords: AT&T, lawsuit, CSS, PC/Tools
To: info-unix at brl-sem.arpa
CIn article <36 at gnosys.UUCP> gst at gnosys.UUCP (Gary S. Trujillo) writes:
C>In article <109 at dcs.UUCP> wnp at dcs.UUCP (Wolf N. Paul) writes:
C>> ...
C>> However, in order to have access to BSD source you need a UNIX source license,
C>> which these folks presumably did not have. Also, I would not be surprised
C>> to find out that vi/ex contains large chunks of ed source.
C>
C>at Berkeley, was that ex/vi *is* covered by the AT&T license EVEN THOUGH IT
C>CONTAINS NOT A SINGLE LINE OF CODE FROM ED!! The fact is that they started
C>by hacking on the ed code, and even though they hollowed the thing out and
I started this discussion, and I'm not sure that the original question is
being addressed: the article said that AT&T won a settlement against CSS
because CSS "used ideas from UNIX." Source code copying may not have been
the issue. The question is: if I develop tools that have the same (or more)
functionality as some of the standard UNIX tools (ls, rm, cpio, tar, etc.),
then can I use the same program names? And if not, can I use the word "UNIX"
in describing the functionality of the tools? Does MKS have a license from
AT&T?
--
Dominick Samperi, NYC
samperi at acf8.NYU.EDU samperi at marob.MASA.COM
cmcl2!phri!marob uunet!swlabs!mancol!samperi
(^ ell)
-----------------------------
From: "David F. Carlson" <dave at micropen>
Subject: SYS V sigset(2)
Date: 14 Jun 88 20:23:46 GMT
Keywords: sigset(2) signal(2) SYSV.3.0
To: info-unix at SEM.BRL.MIL
I have a program in which it is "useful" to have reliable signals,
and therefore I must use sigset(2) (under System Vr3.0).
Problem is that the man pages tell me that when I am in a handler the
signal is automatically set to SIG_HOLD. SIG_HOLD queues up to 1 occurance
if the signal is again received. However, I am finding by way of a stack
dump that my signal handler is being entered *again and again* even though
sigset(2) is being used throughout my entire process (for that signal and all
others.) Of course, the exclusive resource assumed by the signal handler is
locked by a previous entry and deadlock results. Why is the documented sighold
not stopping further occurances when I am in the signal handler?
Also, a related question:
How does sigpause(2) differ from pause(2) for waiting? The man pages
detail dire consequences for mixing signal(2) and sigset(2) but I see
little relation between pause(2) and sigset(2). Is there a hidden hazard
or is this only a problem of wating within a signal handler itself?
Any help would be appreciated. Funny how out of date things like Bach's
book are when it is barely 2 years old.
--
David F. Carlson, Micropen, Inc.
...!{ames|harvard|rutgers|topaz|...}!rochester!ur-valhalla!micropen!dave
"The faster I go, the behinder I get." --Lewis Carroll
-----------------------------
From: Richard Hoffman <ubiquity at cs.utexas.edu>
Subject: WANTED: Best setup for environment using Tandy 1000 and DeskMate II
Date: 15 Jun 88 01:22:28 GMT
Keywords: Tandy 1000, Terminal Problems
To: info-unix at SEM.BRL.MIL
I am using a Tandy 1000 and Desk Mate II to access UNIX, and cannot seem to
find an appropriate setting for TERM (or something). I would like to be
able to use vi, vnews, and all the other wonderful full-screen stuff, but
everything gets real messed up when things get more complicated than "more".
Any advice at all would be appreciated, preferably by mail. Thanks.
--
Richard Hoffman / 5751 Valkeith / Houston, TX 77096 / (713) 729-5716
+- / 12166 Metric Blvd., #122 / Austin, TX 78757 / (512) 823-1822
"Malt does more than Milton can / To justify God's ways to Man." -- ??
-----------------------------
From: Doug Gwyn <gwyn at brl-smoke.arpa>
Subject: Re: AT&T vs. CSS (PC/Tools)
Date: 15 Jun 88 02:43:58 GMT
Keywords: AT&T, lawsuit
To: info-unix at brl-sem.arpa
In article <308 at marob.MASA.COM> samperi at marob.UUCP (Dominick Samperi) writes:
>if I develop tools that have the same (or more)
>functionality as some of the standard UNIX tools (ls, rm, cpio, tar, etc.),
>then can I use the same program names? And if not, can I use the word "UNIX"
>in describing the functionality of the tools?
Since none of the names "ls", "rm", etc. are trademarks, you may use them.
"UNIX" is a registered trademark of AT&T, so you have to be careful how
you use it. You should not apply the appellation "UNIX" to your own
products, unless AT&T has granted you permission to do so. If you wish to
advertise them as "upward-compatible with UNIX* version NN tools", with a
footnote stating the trademark status of "UNIX", then I don't think there
is anything AT&T can do about it.
Since I'm not a lawyer you should verify this before acting on it.
-----------------------------
From: Pete Shipley <shipley at web5h.berkeley.edu>
Subject: Re: .mailrc
Date: 15 Jun 88 02:45:49 GMT
Sender: usenet at agate.berkeley.edu
To: info-unix at brl-sem.arpa
In article <4097 at fluke.COM> strong at tc.fluke.COM (Norm Strong) writes:
>I would like to put something in my .mailrc file, so that I will automatically
>be in the vi editor when I invoke the mail program. Currently, I have to type
>~v every time. Is there a way to do this?
>--
>Norm (strong at tc.fluke.com)
learn to use mh instead?
Pete Shipley:
email: shipley at widow.berkeley.edu Flames: cimarron at zen.berkeley.edu
uunet!lurnix!shipley or ucbvax!zen!shipley or pyramid!hippo!peter
Spelling corections: /dev/null Quote: "Anger is an energy"
-----------------------------
From: Darryl Baker <dpb at tellab5.uucp>
Subject: Re: afio
Date: 14 Jun 88 22:47:27 GMT
Keywords: how to use
To: info-unix at SEM.BRL.MIL
In article <4449 at killer.UUCP> jlg at killer.UUCP (J L Gomez) writes:
+>I've compiled the afio program but do not how to use it with the
+>UNIX-PC's floppy disk drive. I know how to use cpio but using the same
+>syntax with afio doesn't work. I need to know how to use the -i, -o, and
+>-t options of afio. The floppy disk drive name is /dev/rfp021.
+>Thanks for the help and info!
+>
could just reprint the manual page but....
The difference between afio and cpio is that afio takes the archive file as an argument while cpio you just redirect at the archive.
So:
find / -print|cpio -ocB > /dev/rfp021
Becomes:
find / -print|afio -o /dev/rfp021
And
cpio -iBdvmu[c] < /dev/rfp021
Becomes:
afio -i /dev/rfp021
( Note the "c" option is for Ascii headers the default output for afio, but
afio will read all other formats and decipher them without needing any options )
--
__ _ __
/ ) // / ) /
/ / __. __ __ __ , // /--< __. /_ _ __ Darryl Baker
/__/_(_/|_/ (_/ (_/ (_/_</_ /___/_(_/|_/ <_</_/ (_ ihnp4!tellab5!dpb
/
'
-----------------------------
End of INFO-UNIX Digest
***********************
More information about the Comp.unix.questions
mailing list