8 bits no parity

[Carl Lowenstein]

I don't know if this is a NeXT-specific problem, or more wide-spread.

When using tip(1) to connect to a modem through /dev/cua, I
would like to set the serial output format to 8 bits no parity.

A tour through the manuals finds tty(4) saying:
"output parity is usually even."  No clues there.

stty(1) can set acceptance of input data to be odd, even, or both,
but does not affect output.


-- 
        carl lowenstein         marine physical lab     u.c. san diego
        {decvax|ucbvax} !ucsd!mpl!cdl                 cdl at mpl.ucsd.edu
                                                  clowenstein at ucsd.edu