How to set up printer on SCO Xenix 386?

[Mark A. Emanuele]

In article <13 at ivysoft.UUCP>, tonyl at ivysoft.UUCP (Y. Tony Lin of Ivysoft) writes:
> 
> 
> I am having problems to make the printer configuration work on Xenix 2.3.
> The following describes what works and what doesn't.  Please help me. 
> 
>       indicates "Scheduler is not running." 
> 
> 
>       The problem seems to be the lp scheduler is not running.  So I use 
>       the command 
>           /usr/lib/lpsched [Enter]
>       to enable the scheduler as said by the manual.  After the command is
>       typed, the command is accepted by the system, but no response 
>       message.  It just came back to the command prompt #. 
> 
> 

I had a similar problem with an ATT 3b2 a few years ago.


It seems that there is a lock file in /usr/spool/lp called SCHEDLOCK


you need to get rid of this file before starting /usr/lib/lpsched


This SHOULD work.









Mark Emanuele


-- 
Mark A. Emanuele
V.P. Engineering  Overleaf, Inc.
500 Route 10 Ledgewood, NJ 07852-9639         attmail!overlf!emanuele
(201) 927-3785 Voice   (201) 927-5781 fax     emanuele at overlf.UUCP