Request help w/ Telebit configuration problem.

[Carl E. Garringer]

in article <21 at dynasys.UUCP>, jessea at dynasys.UUCP (Jesse W. Asher) says:
> 800 number for telebit connections.  When I call that number, however, it
  900 ?

> just says "CONNECT" and doesn't seem to be in PEP mode.  The call completes
I don't have my doc's here but I think the S50 should be set to 255 to force
a PEP connect. The first time I connected to UUNET I connected at 2400 baud
and then I figered out how to force the dialer to make a PEP connect. It also
changed the wait time from 40 seconds to 60 seconds.

> connect to another site after the first time I use it, it doesn't except
> any more AT commands.  When the dialer gives it an AT&F\r\c and then expects
I have the same problem but I have found a workaround. I am using a SCO xenix
system, and can use the -h option of the dialer to clear the problem. I think
it has something to do with the hardware line (DCD, DTR, etc.). I have noticed
that this problem does not occur when using the PEP mode.

> a compiled dialer so I had to create an entry in the Dialers file.  Here it
> is:
> Telebit	=,-,	"" \M\dAT&F\r\c OK\r ATE0Q6F1V1X3S0=1S45=255S50=0S51=254S52=2S53=0S54=3\r\c OK\r ATS55=0S56=017S57=019S58=2S60=0S64=0S65=0S66=1S67=0\r\c OK\r ATS68=255S92=0S95=0S96=1S110=255S111=255S130=2S131=2\r\c OK\r \eATDT\T\r\c CONNECT \r\m\c

> In the other dialers, most looked for "00" to tell that it had connected.  But
> I had to switch it to "CONNECT" in order for it to register.
This may be due to the type of return code expected numeric or text.

> Just in case something is wrong in this area, I am running uugetty on the line
> and here is the gettydefs entry for 19200:
> 19200# B19200 OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY PARENB ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS7 CREAD # B19200 OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY PARENB ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS7 CREAD #login: #9600

You should try 9600 first, I have not been able to connect at 19200 yet. I
am sure that it is my system and not the modem.

-- 
Carl E. Garringer                   uucp: {ccicpg,felix}!legs!carl
c/o AST Research Inc. Dept 660      Fax: (714) 727-9358
P. O. Box 19658                     Tel: (714) 727-8631
Irvine, California 92713-9658