Compiling PATCH
D. Gumkowski
gumkowsk at nadc.nadc.navy.mil
Tue Jul 10 22:21:23 AEST 1990
You only need "patch12" from the author. I ftp'd it from the writer's
home system, "jpl-devvax.jpl.nasa.gov" (128.149.8.43). The patch follows...
Dave Gumkowski
----------------------------------------------------------------------------
System: patch version 2.0
Patch #: 12
Priority: LOW
Subject: some faulty declarations
Description:
Certain systems were producing compilation errors and warnings due
to some faulty declarations.
Fix: From rn, say "| patch -p -N -d DIR", where DIR is your patch source
directory. Outside of rn, say "cd DIR; patch -p -N <thisarticle".
After patching:
Configure -d
make
make install
If patch indicates that patchlevel is the wrong version, you may need
to apply one or more previous patches, or the patch may already
have been applied. See the patchlevel.h file to find out what has or
has not been applied. In any event, don't continue with the patch.
If you are missing previous patches they can be obtained from me:
Larry Wall
lwall at jpl-devvax.jpl.nasa.gov
If you send a mail message of the following form it will greatly speed
processing:
Subject: Command
@SH mailpatch PATH patch 2.0 LIST
^ note the c
where PATH is a return path FROM ME TO YOU in Internet notation, and
LIST is the number of one or more patches you need, separated by spaces,
commas, and/or hyphens. Saying 35- says everything from 35 to the end.
You can also get the patches via anonymous FTP from
jpl-devvax.jpl.nasa.gov (128.149.8.43).
Index: patchlevel.h
Prereq: 11
1c1
< #define PATCHLEVEL 11
---
> #define PATCHLEVEL 12
Index: MANIFEST
12a13
> config.h.SH 3 Produces config.h.
Index: Makefile.SH
Prereq: 2.0.1.1
*** Makefile.SH.old Wed Jun 22 21:18:32 1988
--- Makefile.SH Wed Jun 22 21:18:32 1988
***************
*** 3,11 ****
esac
echo "Extracting Makefile (with variable substitutions)"
cat >Makefile <<!GROK!THIS!
! # $Header: Makefile.SH,v 2.0.1.1 88/06/03 15:00:48 lwall Locked $
#
# $Log: Makefile.SH,v $
# Revision 2.0.1.1 88/06/03 15:00:48 lwall
# patch10: upgraded to match some new metaconfig stuff
#
--- 3,14 ----
esac
echo "Extracting Makefile (with variable substitutions)"
cat >Makefile <<!GROK!THIS!
! # $Header: Makefile.SH,v 2.0.1.2 88/06/22 20:43:40 lwall Locked $
#
# $Log: Makefile.SH,v $
+ # Revision 2.0.1.2 88/06/22 20:43:40 lwall
+ # patch12: config.h now depends on config.h.SH
+ #
# Revision 2.0.1.1 88/06/03 15:00:48 lwall
# patch10: upgraded to match some new metaconfig stuff
#
***************
*** 55,60 ****
--- 58,66 ----
patch: $(obj)
$(CC) $(LDFLAGS) $(obj) $(libs) -o patch
+
+ config.h: config.h.SH
+ sh config.h.SH
# won't work with csh
install: patch
Index: README
*** README.old Wed Jun 22 21:18:35 1988
--- README Wed Jun 22 21:18:36 1988
***************
*** 1,6 ****
Patch Kit, Version 2.0
! Copyright (c) 1986, Larry Wall
You may copy the patch kit in whole or in part as long as you don't try to
make money off it, or pretend that you wrote it.
--- 1,6 ----
Patch Kit, Version 2.0
! Copyright (c) 1988, Larry Wall
You may copy the patch kit in whole or in part as long as you don't try to
make money off it, or pretend that you wrote it.
***************
*** 46,54 ****
5) Read the manual entry before running patch.
6) IMPORTANT! Help save the world! Communicate any problems and
! suggested patches to me, lwall at sdcrdcf.UUCP (Larry Wall), so we can
! keep the world in sync. If you have a problem, there's someone else
! out there who either has had or will have the same problem.
If possible, send in patches such that the patch program will apply them.
Context diffs are the best, then normal diffs. Don't send ed scripts--
--- 46,54 ----
5) Read the manual entry before running patch.
6) IMPORTANT! Help save the world! Communicate any problems and
! suggested patches to me, lwall at jpl-devvax.Jpl.Nasa.Gov (Larry Wall),
! so we can keep the world in sync. If you have a problem, there's
! someone else out there who either has had or will have the same problem.
If possible, send in patches such that the patch program will apply them.
Context diffs are the best, then normal diffs. Don't send ed scripts--
Index: common.h
Prereq: 2.0.1.1
*** common.h.old Wed Jun 22 21:18:39 1988
--- common.h Wed Jun 22 21:18:40 1988
***************
*** 1,6 ****
! /* $Header: common.h,v 2.0.1.1 88/06/03 15:01:56 lwall Exp $
*
* $Log: common.h,v $
* Revision 2.0.1.1 88/06/03 15:01:56 lwall
* patch10: support for shorter extensions.
*
--- 1,9 ----
! /* $Header: common.h,v 2.0.1.2 88/06/22 20:44:53 lwall Locked $
*
* $Log: common.h,v $
+ * Revision 2.0.1.2 88/06/22 20:44:53 lwall
+ * patch12: sprintf was declared wrong
+ *
* Revision 2.0.1.1 88/06/03 15:01:56 lwall
* patch10: support for shorter extensions.
*
***************
*** 151,155 ****
#ifdef CHARSPRINTF
char *sprintf();
#else
! int *sprintf();
#endif
--- 154,158 ----
#ifdef CHARSPRINTF
char *sprintf();
#else
! int sprintf();
#endif
Index: patch.c
Prereq: 2.0.1.5
*** patch.c.old Wed Jun 22 21:18:46 1988
--- patch.c Wed Jun 22 21:18:49 1988
***************
*** 1,5 ****
char rcsid[] =
! "$Header: patch.c,v 2.0.1.5 88/06/03 15:09:37 lwall Locked $";
/* patch - a program to apply diffs to original files
*
--- 1,5 ----
char rcsid[] =
! "$Header: patch.c,v 2.0.1.6 88/06/22 20:46:39 lwall Locked $";
/* patch - a program to apply diffs to original files
*
***************
*** 9,14 ****
--- 9,17 ----
* money off of it, or pretend that you wrote it.
*
* $Log: patch.c,v $
+ * Revision 2.0.1.6 88/06/22 20:46:39 lwall
+ * patch12: rindex() wasn't declared
+ *
* Revision 2.0.1.5 88/06/03 15:09:37 lwall
* patch10: exit code improved.
* patch10: better support for non-flexfilenames.
***************
*** 288,293 ****
--- 291,297 ----
Strcpy(rejname, outname);
#ifndef FLEXFILENAMES
{
+ char *rindex();
char *s = rindex(rejname,'/');
if (!s)
Index: patch.man
Prereq: 2.0.1.1
*** patch.man.old Wed Jun 22 21:18:56 1988
--- patch.man Wed Jun 22 21:18:57 1988
***************
*** 1,7 ****
.rn '' }`
! ''' $Header: patch.man,v 2.0.1.1 88/06/03 15:12:51 lwall Locked $
'''
''' $Log: patch.man,v $
''' Revision 2.0.1.1 88/06/03 15:12:51 lwall
''' patch10: -B switch was contributed.
'''
--- 1,10 ----
.rn '' }`
! ''' $Header: patch.man,v 2.0.1.2 88/06/22 20:47:18 lwall Locked $
'''
''' $Log: patch.man,v $
+ ''' Revision 2.0.1.2 88/06/22 20:47:18 lwall
+ ''' patch12: now avoids Bell System Logo
+ '''
''' Revision 2.0.1.1 88/06/03 15:12:51 lwall
''' patch10: -B switch was contributed.
'''
***************
*** 47,56 ****
''' Bell System Logo is used as a dummy character.
'''
.ie n \{\
! .tr \(bs-\*(Tr
! .ds -- \(bs-
! .if (\n(.H=4u)&(1m=24u) .ds -- \(bs\h'-12u'\(bs\h'-12u'-\" diablo 10 pitch
! .if (\n(.H=4u)&(1m=20u) .ds -- \(bs\h'-12u'\(bs\h'-8u'-\" diablo 12 pitch
.ds L" ""
.ds R" ""
.ds L' '
--- 50,59 ----
''' Bell System Logo is used as a dummy character.
'''
.ie n \{\
! .tr \(*W-\*(Tr
! .ds -- \(*W-
! .if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
! .if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
.ds L" ""
.ds R" ""
.ds L' '
Index: util.c
*** util.c.old Wed Jun 22 21:19:01 1988
--- util.c Wed Jun 22 21:19:03 1988
***************
*** 242,251 ****
--- 242,259 ----
if (!reset) {
hupval = signal(SIGHUP, SIG_IGN);
if (hupval != SIG_IGN)
+ #ifdef VOIDSIG
hupval = my_exit;
+ #else
+ hupval = (int(*)())my_exit;
+ #endif
intval = signal(SIGINT, SIG_IGN);
if (intval != SIG_IGN)
+ #ifdef VOIDSIG
intval = my_exit;
+ #else
+ intval = (int(*)())my_exit;
+ #endif
}
Signal(SIGHUP, hupval);
Signal(SIGINT, intval);
More information about the Comp.unix.questions
mailing list