Crisp/Brief/Grief on Unix (Summary)
Rohit Mehrotra
rohit at dmdev.UUCP
Thu Oct 11 01:41:32 AEST 1990
Hi,
Some time back I had posted on the net, inquiring about if
some one use brief/crisp/grief editor on any Unix platform.
I got quite a few replies, either asking about it or detailing
their experience with it. The thing in common was that, who ever
uses it loves it.
Thanks a lot for all the hints / help / inquiries.
This editor goes by the name crisp or grief. Crisp is the most
recent name and the last revision available is version 1.9.
It is available on uunet archive.
INFO ABOUT UUNET ARCHIVE:
>Refering to is as the uunet archive should be fine. Many people know
>how to reach us. I'm surprised the people need the number since the
>name should work fine.
>
> internet: uunet.uu.net [192.48.92.2]
> uucp: uunet!PATHNAME
> (we can be reached by subscribers via their direct
> line or via anonymous uucp using 1-900-GOT-SRCS).
>
> -- postmaster at uunet.uu.net (James Revell)
LOCATION OF THE FILES:
The source code is present in the directory:
>/usr/spool/ftp/comp.sources.misc/volume7/crisp1.9:
>-rw-r--r-- 1 allbery 2440 Jun 10 1989 part01.Z
>-rw-r--r-- 1 allbery 22433 Jun 10 1989 part02.Z
>-rw-r--r-- 1 allbery 22730 Jun 10 1989 part03.Z
>-rw-r--r-- 1 allbery 22714 Jun 10 1989 part04.Z
>-rw-r--r-- 1 allbery 21292 Jun 10 1989 part05.Z
>-rw-r--r-- 1 allbery 20746 Jun 10 1989 part06.Z
>-rw-r--r-- 1 allbery 21654 Jun 10 1989 part07.Z
>-rw-r--r-- 1 allbery 19097 Jun 10 1989 part08.Z
>-rw-r--r-- 1 allbery 23253 Jun 11 1989 part09.Z
>-rw-r--r-- 1 allbery 22573 Jun 11 1989 part10.Z
>-rw-r--r-- 1 allbery 27581 Jun 11 1989 part11.Z
>-rw-r--r-- 1 allbery 26312 Jun 11 1989 part12.Z
>-rw-r--r-- 1 allbery 24986 Jun 11 1989 part13.Z
>-rw-r--r-- 1 allbery 19272 Jun 11 1989 part14.Z
>-rw-r--r-- 1 allbery 18710 Jun 11 1989 part15.Z
>-rw-r--r-- 1 allbery 18859 Jun 11 1989 part16.Z
>-rw-r--r-- 1 allbery 19710 Jun 18 1989 part17.Z
>-rw-r--r-- 1 allbery 18728 Jun 18 1989 part18.Z
>-rw-r--r-- 1 allbery 18499 Jun 18 1989 part19.Z
>-rw-r--r-- 1 allbery 18084 Jun 18 1989 part20.Z
>-rw-r--r-- 1 allbery 3986 Jun 18 1989 part21.Z
>-rw-r--r-- 1 allbery 23455 Jun 18 1989 part22.Z
>-rw-r--r-- 1 allbery 17923 Jun 18 1989 part23.Z
>-rw-r--r-- 1 allbery 22119 Jun 18 1989 part24.Z
>-rw-r--r-- 1 allbery 22770 Jun 21 1989 part25.Z
>-rw-r--r-- 1 allbery 22550 Jun 21 1989 part26.Z
>-rw-r--r-- 1 allbery 21776 Jun 21 1989 part27.Z
>-rw-r--r-- 1 allbery 21710 Jun 21 1989 part28.Z
>-rw-r--r-- 1 allbery 21969 Jun 21 1989 part29.Z
>-rw-r--r-- 1 allbery 22189 Jun 21 1989 part30.Z
>-rw-r--r-- 1 allbery 23554 Jun 21 1989 part31.Z
>-rw-r--r-- 1 allbery 20415 Jun 21 1989 part32.Z
>-rw-r--r-- 1 allbery 8198 Jun 21 1989 part33.Z
It did not work for me on SCO-Xenix 2.3.2 initiallyi as the
"list_buffer" macro and "edit_file", "read_file" macro
do not function properly. However I compiled it on SCO-Unix
machine by changing the CRISP.Inst file so that the xenix files
get linked, and then brought the executables across on SCO-Xenix
and guess what, that worked.
I am presently running it successfully under Sunview on SunOS4.1
on SparcStation, on SCO-Xenix 2.3.2 on AT&T 386e and on SCO-Unix 3.2
on AT&T 386e.
If some one out their has terminal and keyboard macros for wyse60,
tvi925, SunMonitors for SunSparcstation etc i.e. the one present
in (/usr/local/crisp/macros/tty and /usr/local/crisp/macros/kbd)
Please send them to me and then I would archive it at uunet.
There are a few bugs, some of them I resolved, and some I could
not. If any one of you happens to know the fixes I would appreciate
if you could EMAIL me your response.
Here is a list of them which I encountered:
_______________________________________________________________
UNRESOLVED ISSUES:
1)
If some one out their has terminal and keyboard macros for wyse60,
tvi925, SunMonitors for SunSparcstation etc i.e. the one present
in (/usr/local/crisp/macros/tty and /usr/local/crisp/macros/kbd)
Please send them to me and then I would archive it at uunet.
_____________________________________________________________________
2) The column marking (mark 2) and inserting do not behave properly.
No Solution.
_____________________________________________________________________
3) I am wondering if any one has written a macro which basically
emulates "repeat the last command of vi i.e the "." command".
For example, if I issue a command like 10dd in vi, and then want
go another part in the file and issue "." command, it again
deletes 10 lines.
_____________________________________________________________________
_____________________________________________________________________
RESOLVED ISSUES:
1) SEARCH AND TRANSLATE DO NOT WORK WHEN USING F5 AND F6 KEY PROPERLY.
Solution:
the problem is that in the config.c file which came long with
the source code, F5 is defined as "search_fwd", which does not
work.
There are two fixes to it, any one would work:
Note the difference between "_" and "-".
a) change the definition of F5 in config.c to "search-fwd" and
F6 to "translate-fwd" and then recompile.
b) in the file ../src/crisp/crisp.m insert the following statement:
(assign_to_key "<F5>" "search-fwd");
(assign_to_key "<F6>" "translate-fwd");
and then compile it as:
cm -o /usr/local/crisp/macros/crisp.cm crisp.m
you can do the same modifications in the ../src/crisp/tty/<termtype.m>
file with the same result.
_____________________________________________________________________
2) USING BOOKMARKS GIVES A CORE DUMP.
Solution: courtsey: uunet!proto!cims2!kew
and shj at login.dkuug.dk
There are actually a couple of fixes for this one, one of which was my
very lazy way out, and the other which addresses the low-level problem
(which makes my lazy fix make sense).
My fix was to add a macro:
---cut here---cut here---cut here---cut here---cut here---cut here---cut here
(macro _Goto_Bookmark
(
/* There's a major bug in the default goto_bookmark code
** will cause it to dump core on occasion. The code is
** OK for the actual moving, but for some reason, when the
** code has to prompt for a bookmark number, it gets goofy.
** This code simply does the prompting.
*/
(int bm_number)
(if (! (get_parm 0 bm_number "Goto Bookmarker [0-9]: "))
(return))
(if (&& (>= bm_number 0) (<= bm_number 10))
(
(goto_bookmark bm_number)
(set_center_of_window)
)
;else
(
(message "Out of Range")
)
)
)
)
---cut here---cut here---cut here---cut here---cut here---cut here---cut here
and you also have to add the following to crisp.m (where all of the other
autoloads are), assuming that the abovemacro is contained in a file
named bookmark.m:
(autoload "bookmark" "_Goto_Bookmark")
This works but only puts a band-aid on the real problem which is addressed
by the following fix that came across the net the other day (Danger! I've not
tested this one):
(This was posted by:
Stig Jacobsen
shj at login.dkuug.dk )
Here's a ugly, kludgy patch for the bug that makes Crisp 1.9 coredump
when you try to goto a bookmark with Alt-G or the goto_bookmark
built-in. Feed the below text as input to patch.
== cut ==
*** builtin.c Tue Sep 25 02:30:07 1990
--- ../crisp/builtin.c Tue Sep 4 22:40:40 1990
***************
*** 397,402 ****
--- 397,407 ----
trace_acc();
bp->reference++;
# endif
+ /* Couldn't find the size of 'argv', but 5 is a nice number... */
+ /* bookmark.goto_bookmark doesn't test argc and crashes if argv's */
+ /* beyond argc contains bogus stuff. This kludges around it. */
+ for (i=argc; i<5; i++) /* shj */
+ argv[i].l_flags = F_NULL; /* shj */
return free_saved(saved_str, ss_cnt);
}
free_saved(saved_str, ss_cnt)
== cut ==
So there you go. Two fixes (one lazy, one more sophisticated), for one
problem. Hope this helps.
Also, I don't know if you're interested, but I developed a set of macros
that make crisp work well with sccs, doing automatic check-in's if the file
was checked out, searching for an sccs file if the file you asked for
doesn't exist, etc. Give me a holler if you want the stuff; it's rather
poorly commented (as things we write for ourselves usually is). I also have
some rcs macros, but they are really peculiar to my circumstance, so I'm
hesitant to offer them (twist my arm).
keith
_____________________________________________________________________
Thanks
Rohit
Rohit Mehrotra
Fleet Credit Corporation
8325 NW 53rd St, Miami, Fl 33166.
EMAIL: dmdev!rohit at uunet.UU.NET or uunet!dmdev!rohit or dmdev!rohit at uunet.UUCP
VMAIL: 1-800-289-7500 ext 469, 1-305-477-0390 ext 469
--
Rohit Mehrotra
Fleet Credit Corporation
8325 NW 53rd St, Miami, Fl 33166.
E-MAIL Address uunet!dmdev!rohit VOICE 1-(305)-477-0390 Ext 469
More information about the Comp.unix.sysv286
mailing list