FAS install fails: kconfig

[Andreas Hoepfner]

In <150 at xyzoom.UUCP> rob at xyzoom.info.com (Rob Lingelbach) writes:


>I'm trying to install FAS 2.07 to allow use of the AST 4 port card, and
>the kernel build is failing with the following message (ISC 2.2):

>LINE:fas	Y	4	7	1	9	2a0	2bf
>0	0

>ERROR: Interrupt vector conflict between devices 'fas' and 'fas'


>The file /etc/conf/cf.d/sdevice has the line as above, and I can't see

 Looks like You have installed the drivers twice ?! Look for a second
 'fas' line in /etc/conf.cf.d/sdevice file....
 I've installed the drivers in two machines without any problems !

 Andreas


 +-----------------------------------------------------------------------+
 |                   Andreas Hoepfner                                    |
 |                                                                       |
 |     paper mail:                            e-mail:                    |
 | Siemens Nixdorf Informations                                          |
 | Systeme                        USA:  hoepfner.kd at nixdorf.com          |
 | Abt. PU 2222                   !USA: hoepfner.kd at nixdorf.de           |
 | Heinz Nixdorf Ring                                                    |
 | D-4790 Paderborn                                                      |
 | tel.: (+49) 5251 10-7479                                              |
 +-----------------------------------------------------------------------+