INTEL V5 Rel 4
Larry Snyder
larry at nstar
Mon Nov 26 00:39:53 AEST 1990
bill at alembic.acs.com (Bill Hatch) writes:
>We are planning to install Intel V386 Rel 4 in the following hardware
>configuration:
>HP Vectra RS/C 20 Mhz 64KB Cashe, 8 Mb RAM,
>300 Mb HP SCSI disk / Adaptec SCSI controller
>Paridise Color VGA
>Irwin 80 Mb Mini Cartridge Tape
>8 Port Intelligent Controller
I'm glad you brought this up - as I have been to busy to post info
here -
We purchased Intel release 4.0 from Programmers Connections for $1350.
We can't get it to boot on this machine (which runs 386/ix just fine).
Specifics - 33 mhz 386 with 12 megs of ram (we went down to 8 megs to
see if the problem cleared up without luck), Adaptec 1542B, 3 SCSI drives,
and assorted other boards which we pulled to see if they were the problem.
The Adaptec 1542 boot disks starts to boot, puts up the copyright notices,
then hangs after telling me the drive types (which are correct so it has
looked at the drives through the controller).
I tried another machine - and the same thing happened -- no boot.
I don't have the time to devote 100% to this project - so I don't want
to start my 30 day free support from Intel at this time..
Any ideas or pointers out there?
>I would like to know if Intel V386 Rel 4 includes the necessary drivers
>for this hardware configuration or if the drivers for V.4 are provided
>by the hardware manufacturers. Stan Philips at Media Integration helped
>us in selecting the hard disk and in eliminating a SCSI controller
>that was "probably not" V.4 compatible yet.
>From looking over the release notes - the following tape devices are
supported:
Tape Controller Tape Drive
Wangtek PC-36 Wangtec 5099-EN
Everex 811 (Bell Tech) Wangtec 5150-EN
Everex 811 (Bell Tech) Archive Viper 2150L
Archive SC499-R Archive Ext. FT-60
Archive VP402 Archive Viper 2150L
Archive VP402 Wangtec 5150EN
Ok, video boards beyond VGA/EGA
Orchid Pro Designer VGA
Paradise VGA Plus 16
STB VGA Extra/EM 16
Video7 VRAM VGA
Controllers:
1542/1640 Adaptec SCSI
WD 7000 SCSI
ESDI/ST-506
Networking:
PC586
ENET586
MXLAN586
N10
8003
Let me see - smart boards - none are supported in the distribution
software - so it's up to you to contact you multiport vendor directly --
have fun - and wear a smile. Maybe over the xmas holidays I'll get
this working --
we are (were) planning on installing this on our NFS server --
Interactive Unix 3.2 (release 2.20) is so damn solid - the system
reboots and checks the file systems several times a week (we have
been having power problems on a regular basis) without ANY problems -
likewise disk and serial IO is extremely fast...
which way to go?
--
Larry Snyder, Northern Star Communications, Notre Dame, IN USA
{larry at nstar, {uunet|backbone}!nstar!larry, larry%nstar at iuvax.cs.indiana.edu}
backbone usenet newsfeeds available
Public Access Unix Site (219) 289-0282 (5 high speed lines)
More information about the Comp.unix.sysv386
mailing list