Internal modems and Sysv/386?

[daniel.e.zuccarelli]

In article <16388 at s.ms.uky.edu>, kherron at ms.uky.edu (Kenneth Herron) writes:
> 
> Can AT&T Sysv/386 (3.2.1 if it matters) properly use an internal modem-
> on-a-card as tty01?  Any gotchas?  I've tried using FACE to enable 
> tty01 before but have no way to see if it worked...
> 
> The hardware is a 16mhz 6386 WGS.
> 
> Kenneth Herron

What you'll probably need to do is leave it enabled through FACE but disable
the port on the motherboard with a jumper setting.  This will allow
the tty driver to access it through the standard I/O ports and interrupt, 
without having to know whether you're using the port on the motherboard
or on an internal modem card.
-- 
"Well, there's not much to see actually; we're inside a Chinese dragon."
					- Dr. Howard Bannister
Dan Zuccarelli - AT&T Bell Labs CB/RV, INTERACTIVE Systems Corp.
(614) 860-7023  Email: att!asr1!dez OR dez at cbnewsk.att.com